Bird-X BirdXPeller Pro Electronic Bird Preventer Version 1 Instruction Manual

Product Overview

The Bird-X BirdXPeller Pro is an electronic device designed to deter pest birds using sonic distress calls and predator cries. It broadcasts naturally recorded sounds to disorient and frighten away various bird species, including pigeons, starlings, sparrows, and gulls. This device offers a humane and effective method for bird control in various environments.

Image: The Bird-X BirdXPeller Pro device, showing its green casing and speaker grille.

Key Features:

• Deters pest birds without the use of traps or chemicals.
• Utilizes naturally recorded bird distress calls and predator cries.
• Features programmable controls for sound, volume, and timing.
• Covers an area of up to 1 acre.
• Designed with weather-resistant components for outdoor use.

Setup and Installation

The BirdXPeller Pro is designed for straightforward installation in various locations. Consider the target area and the direction of the speaker for optimal coverage.

Placement Considerations:

• Identify areas where birds are a nuisance, such as warehouses, loading docks, farms, or public parks.
• Position the device to ensure the sound can project effectively across the desired coverage area (up to 1 acre).
• The unit is weather-resistant, making it suitable for outdoor environments.

Image: The BirdXPeller Pro device displaying its approximate dimensions: 8.5 inches tall, 6 inches wide, and 4 inches deep.

Mounting:

The BirdXPeller Pro can be mounted using the provided hardware or other securing materials like zip ties. Ensure the device is securely fastened to prevent accidental dislodgement.

Image: The BirdXPeller Pro mounted on an exterior wall, demonstrating a typical installation scenario in a residential setting.

Power Supply:

The device operates electrically. It is compatible with standard power outlets and can also be used with solar panels or batteries for flexible placement options.

Operating Instructions

The BirdXPeller Pro features customizable settings to optimize its effectiveness for different bird species and environments.

Sound and Volume Control:

• The device emits sound pressure ranging from 105 to 110 dB at 1 meter, with a frequency of 3 to 5 kHz.
• Adjust the volume knob to suit the specific area and minimize disturbance to humans while maximizing impact on birds.
• Select from various pre-recorded bird distress sounds and predator calls to target specific bird problems.

Timing and Mode Settings:

The programmable settings allow for precise control over when the sounds are broadcasted. Refer to the control panel on the device for specific dial and switch configurations.

Image: A close-up of the BirdXPeller Pro, highlighting the control panel with volume knob and recording selection switches.

Maintenance

To ensure the longevity and optimal performance of your BirdXPeller Pro, regular maintenance is recommended.

• Keep the device clean from dust, dirt, and debris. Use a soft, damp cloth for cleaning the exterior.
• Periodically check all connections, including the power supply, to ensure they are secure and free from damage.
• Inspect the speaker grille for any obstructions that might impede sound projection.
• For prolonged periods of non-use, store the device in a cool, dry place.

Troubleshooting

If you encounter issues with your BirdXPeller Pro, consider the following common troubleshooting steps:

• No Sound Output:
  • Ensure the device is properly connected to a power source and the power switch is in the 'ON' position.
  • Check the volume setting; it may be set too low.
  • Verify that the sound mode is correctly selected and not set to 'OFF'.
• Ineffective Deterrence:
  • Adjust the volume to a higher setting, ensuring it is audible in the target area.
  • Experiment with different sound recordings and timing intervals. Birds may become accustomed to certain patterns.
  • Re-evaluate the placement of the device to ensure optimal sound coverage and direct line of sight to the affected area.
  • Consider environmental factors that might be dampening sound, such as dense foliage or strong winds.
• Intermittent Operation:
  • Check the power connection for looseness or damage.
  • If using solar or battery power, ensure the power source is adequately charged or functioning correctly.

If these steps do not resolve the issue, please refer to the support information provided in the Warranty and Support section.

Specifications

Safety Information

The BirdXPeller Pro is constructed from durable plastic and metal components. While designed for safe operation, please observe the following:

• Keep the device out of reach of small children and pets to prevent tampering.
• Avoid direct exposure to the speaker at close range when the device is operating, as sound levels can be high.
• Ensure proper electrical connections to prevent hazards.
• Do not attempt to modify the device, as this may void the warranty and pose safety risks.

Warranty and Support

Bird-X has been a leader in humane bird and pest control solutions for over 50 years, committed to providing effective and eco-conscious products.

Contacting Support:

For any issues or inquiries regarding your Bird-X product, please contact customer support:

• Email: Use the contact form available on the official Bird-X website: bird-x.com/contact-pages-31.php
• Phone: Call Bird-X offices at 800.662.5021.

Additional Resources:

A detailed User Manual in PDF format is available for download:

Download User Manual (PDF)