Introduction
This manual provides instructions for the Nuvo TH206 R30 Step Cylinder Track Head. This track head is designed for use with standard R30 bulbs and is suitable for various indoor lighting applications. It features a clean, simple design in a white finish, complementing diverse interior styles. The adjustable head allows for flexible light direction, making it ideal for accent or task lighting.
Image: The Nuvo TH206 R30 Step Cylinder Track Head in white, showcasing its design and compatibility with track lighting systems.
Setup Instructions
Unpacking
Carefully remove the track head from its packaging. Inspect for any damage. Ensure all components are present.
Installation onto Track
The Nuvo TH206 R30 Step Cylinder Track Head is designed for easy, tool-free installation onto most standard track lighting systems.
- Ensure the power to the track lighting system is turned OFF at the circuit breaker.
- Align the track head's adapter with the track slot.
- Insert the adapter into the track and twist to secure it in place. Ensure it clicks firmly.
- Once secured, you can slide the track head along the track to your desired position.
Bulb Installation
- Turn OFF the power at the circuit breaker.
- Insert a standard E26 Medium base R30 bulb (not included) into the socket of the track head. Do not exceed the maximum wattage of 75 watts.
- Turn the power ON at the circuit breaker.
Operating Instructions
Adjusting Light Direction
The track head features an adjustable design. You can tilt and rotate the head to direct light precisely where needed. This allows for highlighting specific areas, artwork, or architectural features.
Dimming Functionality
If paired with a compatible dimmer switch and a dimmable R30 bulb, the brightness of the track head can be adjusted to create various lighting atmospheres.
Maintenance
Cleaning
To clean the track head, ensure the power is OFF and the bulb is cool. Wipe the exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents.
Bulb Replacement
- Turn OFF the power to the track lighting system at the circuit breaker.
- Allow the bulb to cool completely.
- Carefully unscrew the old R30 bulb from the socket.
- Screw in a new E26 Medium base R30 bulb, ensuring it is securely seated. Do not exceed 75 watts.
- Restore power to the track lighting system.
Troubleshooting
Light Does Not Turn On
- Check if the power is ON at the circuit breaker.
- Ensure the bulb is correctly installed and not burnt out. Replace if necessary.
- Verify the track head is securely connected to the track.
Light Flickers
- Ensure the bulb is fully screwed in.
- If using a dimmer, ensure the bulb is dimmable and compatible with the dimmer switch.
- Check for loose connections in the track system.
Specifications
| Feature | Detail |
|---|---|
| Brand | Nuvo |
| Model Number | TH206 |
| Style | PAR30LN Step |
| Color | White |
| Material | Glass, Metal |
| Light Fixture Form | Track Light Head |
| Indoor/Outdoor Usage | Indoor |
| Power Source | Corded Electric |
| Light Source | Incandescent (compatible with R30 bulb) |
| Number of Light Sources | 1 |
| Voltage | 120 Volts |
| Wattage | 75 watts (max) |
| Bulb Base | E26 Medium |
| Item Dimensions (L x W x H) | 4.5"L x 8.5"W x 6.5"H |
| Required Assembly | Yes |
| Safety Rating | UL Listed |
Warranty Information
This product comes with a 1-year limited manufacturer's warranty. Please refer to the original purchase documentation for full details or contact Nuvo Lighting customer service for specific warranty terms and conditions.
Customer Support
For further assistance, technical support, or to inquire about replacement parts, please contact Nuvo Lighting customer service. Contact information can typically be found on the manufacturer's official website or your product packaging.
