1. Introduction
This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your Elite Screens Manual Series M120UWH2 120-inch 16:9 pull-down projector screen. Please read this manual thoroughly before installation and retain it for future reference.
2. Safety Information
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
- Ensure the screen is securely mounted to a structural support capable of holding its weight.
- Do not attempt to modify or disassemble the screen housing or mechanism.
- Keep the screen away from heat sources, open flames, and direct sunlight to prevent damage.
- Avoid pulling the screen down with excessive force or allowing it to retract uncontrolled.
- This screen is NOT Recommended for Ultra Short Throw or Short Throw Projectors.
3. Package Contents
Verify that all components are present before beginning installation:
- Projection screen (M120UWH2)
- Screen lanyard
- Wood Screws (2)
- Dry wall anchors (2)
4. Product Features
- Screen Size: 120-inch Diagonal, 16:9 Aspect Ratio.
- Viewable Area: 58.7" H x 104.6" W.
- Overall Dimensions: 67.1" H x 110.9" W.
- Casing: Black steel casing.
- Screen Material: MaxWhite 2, 1.1 Gain. Multi-layer weave, 180-degree wide viewing angle, fully black-backed front projection surface with textured finish.
- Compatibility: 4K Ultra HD and Active 3D Projection Ready.
- Installation: Dual wall and ceiling installation design.
- Mechanism: Auto-locking system for variable height settings.
- Certifications: Greenguard & Greenguard GOLD certified, UL 2818.
5. Setup & Installation
The Elite Screens Manual Series M120UWH2 projector screen offers versatile installation options for both wall and ceiling mounting. Ensure you have appropriate tools and assistance for safe installation.
5.1 Mounting Options
The screen features a durable steel casing designed for either wall or ceiling suspended mounting. Optional 6" and 12" L brackets are available separately for specific installation needs.
Figure 1: Elite Screens Manual Series showing dual wall or ceiling installation options. The screen can be pulled down or retracted. A screen lanyard is included for easy operation.
5.2 Installation Steps
For detailed installation guidance, refer to the official Elite Screens installation video below. It demonstrates the process for hanging the screen on a ceiling, including locating studs for secure mounting.
Video 1: Official Elite Screens Manual Series Installation Video. This video provides a step-by-step guide on how to properly install your manual pull-down projector screen.
Another helpful video demonstrates how to hang the screen on ceiling studs, which is crucial for ensuring stability and safety.
Video 2: How to hang Elite projector screen on Ceiling in studs. This video details the process of securing the projector screen to ceiling studs for a stable installation.
6. Operating Instructions
The Manual Series screen features an auto-locking mechanism that allows you to set the screen at various height positions. A screen lanyard is included to assist with reaching the pull-down handle in higher installations.
6.1 Pulling Down the Screen
Gently pull the screen's handle downwards. The auto-locking mechanism will engage at various intervals, allowing you to stop the screen at your desired viewing height. Release the handle once the screen is in position.
Figure 2: The screen lanyard attached to the pull-down handle, designed for easy access in high installations.
6.2 Retracting the Screen
To retract the screen, pull the handle down slightly further than its current position and then gently guide it upwards. The auto-locking mechanism will disengage, allowing the screen to smoothly roll back into its casing. Ensure a controlled retraction to prevent damage.
Video 3: Demonstration of the manual pull-down projector screen with auto-lock. This video shows how to pull down and retract the screen smoothly.
7. Maintenance
To ensure the longevity and optimal performance of your projector screen, follow these maintenance guidelines:
- Cleaning the Screen Surface: Use a soft, damp cloth with mild soap and water to gently clean the MaxWhite 2 screen material. Avoid harsh chemicals or abrasive cleaners, as these can damage the surface.
- Cleaning the Casing: Wipe the steel casing with a soft, dry cloth to remove dust.
- Storage: When not in use for extended periods, ensure the screen is fully retracted into its casing to protect the surface from dust and damage.
8. Troubleshooting
If you encounter any issues with your projector screen, refer to the following common troubleshooting tips:
- Screen Not Retracting Fully: Ensure the screen is pulled down slightly past its last locked position before guiding it up. If the issue persists, check for any obstructions in the retraction mechanism.
- Waves or Wrinkles on Screen: Minor waves may occur with manual screens. Ensure the screen is properly installed and tensioned. If waves are significant or affect viewing, contact customer support.
- Difficulty Pulling Down/Retracting: Check for any physical obstructions. Ensure the mechanism is clean and free of debris.
9. Specifications
| Feature | Detail |
|---|---|
| Model Number | M120UWH2 |
| Display Dimensions | 120 inch diagonal (58.7" H x 104.6" W) |
| Overall Product Dimensions | 110.09 x 3.1 x 69.4 inches |
| Item Weight | 19.96 pounds |
| Material | MaxWhite 2 (1.1 Gain) |
| Mounting Type | Wall / Ceiling Mount |
| Aspect Ratio | 16:9 |
10. Warranty & Support
Elite Screens provides a 2-Year / 3-Year ENR-G Manufacturer's Warranty for products purchased new. As an ISO9001 manufacturer since 2004, Elite Screens is committed to quality.
For any technical assistance or warranty claims, please contact Elite Screens' Professional Service Team via email, web chat, or toll-free phone call. Lifetime technical support is available.
