Nikon MH-63
Nikon MH-63 Battery Charger Instruction Manual
Model: MH-63 | Brand: Nikon
1. Product Overview
The Nikon MH-63 is a dedicated battery charger designed for the Nikon EN-EL10 Lithium-ion Battery. It provides a reliable and efficient method for recharging your camera battery, ensuring your Nikon COOLPIX digital camera is always ready for use. This charger is compatible with various COOLPIX models including S80, S5100, S4000, S3000, S700, S600, S570, S520, S510, S210, and S200.

Figure 1: Nikon MH-63 Battery Charger
This image displays the Nikon MH-63 battery charger, a compact black device with a slot for the battery and a power input port. The "CHARGE" indicator light is visible on the top surface.
2. Safety Information
To ensure safe operation and prevent damage to the charger or battery, please observe the following precautions:
- Use the MH-63 charger only with genuine Nikon EN-EL10 Lithium-ion batteries. Using incompatible batteries may cause fire, injury, or damage.
- This charger is designed for indoor use only. Do not expose it to rain, moisture, or extreme temperatures.
- Do not disassemble, modify, or attempt to repair the charger. Refer all servicing to qualified service personnel.
- Keep the charger away from water and other liquids. If the charger comes into contact with liquid, disconnect it immediately from the power source.
- Do not handle the charger or power cord with wet hands.
- Ensure the power cord is not damaged, pinched, or walked on. A damaged cord can lead to electric shock or fire.
- Unplug the charger from the power outlet when not in use or before cleaning.
- Keep out of reach of children.
3. Package Contents
Verify that all items are present in your package:
- Nikon MH-63 Battery Charger
- AC Power Cord
4. Setup
Follow these steps to set up your MH-63 battery charger:
- Connect the Power Cord: Insert the small end of the supplied AC power cord into the power input port on the side of the MH-63 charger.
- Plug into Power Outlet: Plug the other end of the AC power cord into a standard wall power outlet (100-240V AC, 50/60Hz).
- Insert Battery: Align the Nikon EN-EL10 Lithium-ion battery with the battery slot on the charger. Gently slide the battery into the slot until it clicks securely into place. Ensure the battery is inserted with the correct orientation.

Figure 2: Nikon MH-63 Battery Charger showing battery slot
This image provides a closer view of the Nikon MH-63 battery charger, highlighting the dedicated slot where the EN-EL10 battery is inserted for charging. The "CHARGE" indicator light is also visible.
5. Operating Instructions
Once the battery is correctly inserted and the charger is connected to power, the charging process will begin automatically.
- Charging Indicator: An orange "CHARGE" indicator light on the charger will flash while the battery is charging.
- Charging Complete: The orange "CHARGE" indicator light will stop flashing and remain steadily lit when the battery is fully charged.
- Removing Battery: Once charging is complete, gently slide the battery out of the charger slot.
- Disconnecting Charger: Unplug the AC power cord from the wall outlet when charging is complete or when the charger is not in use.
Charging times may vary depending on the battery's remaining charge and its condition.
6. Maintenance
Proper maintenance ensures the longevity and optimal performance of your MH-63 charger:
- Cleaning: Before cleaning, always disconnect the charger from the power outlet. Use a soft, dry cloth to wipe the exterior of the charger. Do not use liquid cleaners, solvents, or abrasive materials.
- Storage: Store the charger in a cool, dry place away from direct sunlight, high temperatures, and humidity. When storing for extended periods, ensure the charger is unplugged.
- Handling: Avoid dropping the charger or subjecting it to strong impacts, which can damage internal components.
7. Troubleshooting
If you encounter issues with your MH-63 charger, refer to the following table:
| Problem | Possible Cause | Solution |
|---|---|---|
| Charger indicator light does not illuminate or flash. |
|
|
| Battery does not charge fully or holds charge for a short time. |
|
|
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | MH-63 (Nikon Part No. 25747) |
| Compatible Battery | Nikon EN-EL10 Lithium-ion Battery |
| Input Voltage | AC 100-240V, 50/60Hz |
| Output Voltage | DC 5V |
| Color | Black |
| Item Weight | 3.41 ounces (approx. 96.7 grams) |
| Manufacturer | Nikon |
| Date First Available | October 2, 2001 |
9. Warranty and Support
For information regarding the product warranty, please refer to the warranty card included with your original purchase or visit the official Nikon website. Nikon provides customer support for product inquiries, technical assistance, and service requests.
Nikon Official Website: www.nikonusa.com/en/service-and-support/index.page
Please note that warranty terms and conditions may vary by region and purchase date. Always retain your proof of purchase for warranty claims.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.







