Introduction
Thank you for purchasing the Winsome Philip Coat Tree. This manual provides detailed instructions for the assembly, operation, and maintenance of your new coat tree. Designed for functionality and style, this 6-peg coat tree offers a convenient solution for organizing coats, hats, and other accessories in your entryway or living space. Please read these instructions carefully before assembly and retain this manual for future reference.
Important Safety Information
- Always assemble the product on a soft, clean surface to prevent scratches.
- Ensure all parts are securely fastened before use. Periodically check and tighten all connections.
- Do not exceed the maximum weight recommendation of 30 pounds (13.6 kg) to prevent tipping or damage.
- Keep small parts away from children during assembly.
- Avoid placing the coat tree in high-traffic areas where it could be easily knocked over.
- This product is intended for indoor use only.
Parts List
Before beginning assembly, verify that all components listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.
- A. Top Post with Finial
- B. Middle Post
- C. Bottom Post
- D. Base Legs (3 pieces)
- E. Pegs (6 pieces)
- F. Screws for Pegs (6 pieces)
- G. Connecting Bolts (2 pieces)
- H. Allen Wrench (1 piece)
Setup and Assembly Instructions
Assembly is required for this product. Please follow these steps carefully.
- Step 1: Attach Base Legs to Bottom Post.
Align the three Base Legs (D) with the pre-drilled holes at the bottom of the Bottom Post (C). Secure each leg using the provided connecting bolts (G) and Allen wrench (H). Ensure they are tightened firmly for stability.
- Step 2: Connect Middle Post to Bottom Post.
Screw the Middle Post (B) into the top of the Bottom Post (C). Turn clockwise until securely fastened. There should be no wobble between the two sections.
- Step 3: Attach Pegs to Top Post.
Insert each of the six Pegs (E) into the pre-drilled holes on the Top Post with Finial (A). Secure each peg from the inside of the post using the smaller screws (F) and a screwdriver (not included). Ensure all pegs are firmly attached.
- Step 4: Connect Top Post to Middle Post.
Screw the assembled Top Post (A) into the top of the Middle Post (B). Turn clockwise until securely fastened. The entire coat tree should now be assembled and stand upright without assistance.
Operating Instructions
The Winsome Philip Coat Tree is designed for simple and effective organization.
- Placement: Position the coat tree on a flat, stable surface in your desired location, such as an entryway, hallway, or bedroom.
- Hanging Items: Utilize the six pegs to hang coats, jackets, hats, scarves, and other lightweight accessories. Distribute weight evenly across the pegs to maintain stability.
- Weight Limit: Do not exceed the maximum recommended weight of 30 pounds (13.6 kg) for the entire unit. Overloading can cause the coat tree to tip or become damaged.
Maintenance
- Cleaning: Wipe the coat tree with a soft, damp cloth to remove dust and dirt. Avoid using harsh chemicals or abrasive cleaners, as these can damage the walnut finish.
- Inspection: Periodically check all screws and connections to ensure they remain tight. Re-tighten if necessary to maintain stability and prevent accidents.
- Storage: If disassembling for storage, keep all parts and hardware together in a safe place.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Coat tree is wobbly. | Loose connections or uneven surface. | Ensure all bolts and screws are tightened. Move the coat tree to a flat, level surface. |
| Pegs are loose. | Screws securing pegs are not tight. | Re-tighten the screws (F) that secure the pegs (E) to the Top Post (A). |
| Coat tree tips over easily. | Overloaded or uneven weight distribution. | Reduce the number of items or weight. Distribute items evenly around the pegs. Ensure the base is on a stable, level surface. Do not exceed 30 lbs. |
Specifications
- Brand: Winsome
- Model Number: 94672
- Color: Walnut
- Material: Solid / Composite Wood (Beachwood)
- Product Dimensions (D x W x H): 19.02" x 21.57" x 71.22" (48.3 cm x 54.8 cm x 180.9 cm)
- Number of Pegs: 6
- Installation Type: Free Standing
- Maximum Weight Recommendation: 30 pounds (13.6 kg)
- Item Weight: 4.4 pounds (2 kg)
- Recommended Uses: Coats, Hats, Scarves
Warranty Information
Winsome Trading, Inc. provides a warranty for replacement parts for 60 days from the date of purchase. This warranty covers manufacturing defects and missing components. Please retain your proof of purchase for any warranty claims.
Customer Support
For assistance with assembly, missing parts, or any other inquiries regarding your Winsome Philip Coat Tree, please contact Winsome customer support. Refer to your purchase documentation or the Winsome website for the most current contact information.
You can also visit the Winsome Store on Amazon for more product information and support resources.