1. Introduction
This manual provides essential information for the safe and effective use of your OSRAM DULUX-D 13W G24d-1 Compact Fluorescent Lamp. Please read these instructions carefully before installation and retain them for future reference.
Image 1.1: OSRAM DULUX-D 13W G24d-1 Compact Fluorescent Lamp.
Product Overview
The OSRAM DULUX-D 13W G24d-1 is an energy-saving compact fluorescent lamp designed for general lighting applications. It features a 2-pin G24d-1 base, a 4000K cool white color temperature, and is suitable for operation with conventional control gear. This lamp offers a long average service life and contributes to reduced energy consumption.
2. Safety Information
- WARNING: Always switch off the power supply before installing, removing, or cleaning the lamp.
- Do not use this lamp with dimmers unless specifically rated for dimmable CFLs and compatible with the lamp's control gear.
- Handle the lamp by its base, not the glass tube, to avoid breakage.
- If the lamp breaks, ventilate the room for 15 minutes and use gloves to collect broken pieces. Place them in a sealed plastic bag and dispose of them according to local regulations.
- Ensure the lamp is fully inserted into the fixture's socket.
3. Setup and Installation
Follow these steps for proper installation of your OSRAM DULUX-D lamp:
- Verify Compatibility: Ensure your lighting fixture is designed for a G24d-1 2-pin base and uses conventional control gear. This lamp is not compatible with G24q (4-pin) bases or electronic ballasts.
- Power Off: Turn off the power to the lighting fixture at the circuit breaker or wall switch before beginning installation.
- Remove Old Lamp (if applicable): If replacing an existing lamp, allow it to cool completely. Gently twist and pull the old lamp straight out from the socket.
- Insert New Lamp: Align the two pins of the OSRAM DULUX-D lamp with the slots in the fixture's socket. Gently push the lamp straight into the socket until it is firmly seated. Do not force the lamp.
- Restore Power: Once the lamp is securely installed, restore power to the fixture.
Image 3.1: Close-up view of the G24d-1 2-pin base for proper alignment.
4. Operating Instructions
Once installed, operating the OSRAM DULUX-D lamp is straightforward:
- Turning On/Off: Use the standard wall switch connected to your lighting fixture to turn the lamp on or off.
- Warm-up Time: Compact fluorescent lamps may require a short warm-up period (typically a few seconds to a minute) to reach full brightness and color stability.
- Light Output: This 13W lamp provides 870 lumens of cool white light (4000K), suitable for various indoor environments.
5. Maintenance
The OSRAM DULUX-D lamp requires minimal maintenance:
- Cleaning: Ensure the power is off and the lamp is cool before cleaning. Wipe the glass surface gently with a dry, soft cloth. Do not use liquid cleaners or abrasive materials.
- Replacement: When the lamp reaches the end of its service life (average 10,000 hours), it will typically flicker or fail to illuminate. Replace it following the installation steps in Section 3.
- Disposal: Compact fluorescent lamps contain small amounts of mercury and should be recycled according to local environmental regulations. Do not dispose of them in regular household waste. Contact your local waste management facility for recycling options.
6. Troubleshooting
If your OSRAM DULUX-D lamp is not functioning correctly, consider the following:
- Lamp Does Not Light Up:
- Check if the power switch is on.
- Ensure the lamp is fully and correctly seated in the socket.
- Verify that the circuit breaker for the fixture has not tripped.
- If replacing an old lamp, ensure the new lamp is compatible with the fixture's ballast/control gear.
- Test the lamp in another compatible fixture, if available, to determine if the issue is with the lamp or the fixture.
- Flickering:
- Flickering during warm-up is normal. If flickering persists, ensure the lamp is securely installed.
- Flickering can also indicate the lamp is nearing the end of its life.
- Ensure the fixture's ballast is functioning correctly and is compatible with the lamp.
7. Specifications
Key technical specifications for the OSRAM DULUX-D 13W G24d-1 Compact Fluorescent Lamp:
| Feature | Specification |
|---|---|
| Brand | OSRAM |
| Model Number | 0220-013840o#1#lyd |
| Light Type | Compact Fluorescent (CFL) |
| Wattage | 13 Watts |
| Base Type | G24d-1 (2-Pin) |
| Bulb Shape Size | T (Tubular) |
| Light Color | Cool White |
| Color Temperature | 4000 Kelvin |
| Brightness | 870 Lumens |
| Voltage | 90 Volts (Accepted: 100 to 240 Volts) |
| Average Life | 10,000 hours (Product Description) / 20,000 hours (Specifications) |
| Color Rendering Index (CRI) | 80 (Ra 80-89) |
| Product Dimensions | 5.71 x 1.38 x 1.54 inches |
| Material | Glass |
| Indoor/Outdoor Usage | Indoor |
Image 7.1: Product packaging displaying key specifications.
Image 7.2: Example energy efficiency label. Note: This specific label is for LEDVANCE AC34204 and is illustrative of energy ratings.
8. Warranty and Support
OSRAM products are manufactured to high-quality standards. For specific warranty information, please refer to the packaging or the official OSRAM website. If you encounter any issues or require technical assistance, please contact OSRAM customer support through their official channels.
For more information, visit the OSRAM Store on Amazon or the official OSRAM website.
Relevant product code: 4050300389059
