1. Introduction
This manual provides comprehensive instructions for the safe installation, operation, and maintenance of your FORTE 1301-02-04 Traditional 2-Light Exterior Wall Lantern. Please read all instructions carefully before beginning installation and retain this manual for future reference.
2. Safety Information
WARNING: Risk of Electric Shock. Disconnect power at the fuse box or circuit breaker before installation or servicing.
- Always consult a qualified electrician if you are unsure about the installation process.
- Ensure the electrical supply to the fixture is 120 Volts.
- This fixture is UL rated for wet locations, making it suitable for outdoor use.
- Do not exceed the maximum wattage specified for the bulbs.
- Handle glass components with care to prevent breakage.
- Please check your local laws and building codes before purchasing and installing this product.
3. Product Description and Features
The FORTE 1301-02-04 is a traditional 2-light exterior wall lantern designed to enhance outdoor decor. It features a deep black finish complemented by clear beveled glass panels, offering a classic and elegant appearance.
Key Features:
- Dimensions: Approximately 10 inches wide by 21 inches high with a 10-inch extension from the wall.
- Bulb Requirements: Requires two 60W candelabra base incandescent bulbs (not included).
- Dimmable: Compatible with standard incandescent dimmers.
- Finish: Black.
- Glass: Clear Beveled Glass.
- Rating: UL rated for wet locations, suitable for outdoor installation.
Figure 3.1: Front view of the FORTE 1301-02-04 Exterior Wall Lantern, showcasing its black finish and clear beveled glass panels.
Figure 3.2: An installed view of the FORTE 1301-02-04 Exterior Wall Lantern, demonstrating its appearance on a wall.
4. Setup and Installation
Follow these general steps for installing your exterior wall lantern. It is recommended to have installation performed by a licensed electrician.
Installation Steps:
- Turn Off Power: Locate the circuit breaker or fuse box that controls the power to the installation location. Turn off the power completely before starting any work.
- Prepare Mounting Surface: Ensure the mounting surface is clean, dry, and structurally sound.
- Attach Mounting Bracket: Secure the fixture's mounting bracket to the electrical junction box in the wall using the provided screws.
- Wire Connections: Carefully connect the electrical wires. Connect the black (hot) wire from the fixture to the black (hot) wire from the wall. Connect the white (neutral) wire from the fixture to the white (neutral) wire from the wall. Connect the bare copper or green (ground) wire from the fixture to the ground wire from the wall or the junction box. Use wire nuts to secure all connections.
- Secure Fixture: Carefully tuck the wires into the junction box and align the fixture with the mounting bracket. Secure the fixture to the bracket using the provided screws or nuts.
- Install Bulbs: Insert two 60W candelabra base incandescent bulbs into the sockets. Do not overtighten.
- Restore Power: Once the fixture is securely installed and bulbs are in place, restore power at the circuit breaker or fuse box.
5. Operating Instructions
The FORTE 1301-02-04 Exterior Wall Lantern operates via a standard wall switch connected to its electrical circuit. Simply toggle the wall switch to turn the light fixture on or off.
- If connected to a compatible incandescent dimmer switch, you can adjust the brightness of the lights.
6. Maintenance
Regular maintenance will help preserve the appearance and functionality of your lantern.
- Cleaning: To clean the fixture, ensure power is off. Use a soft, damp cloth to wipe down the black finish and glass panels. Avoid abrasive cleaners or solvents, as they may damage the finish or glass.
- Bulb Replacement: Before replacing bulbs, turn off the power to the fixture. Allow bulbs to cool completely. Unscrew old bulbs and screw in new 60W candelabra base incandescent bulbs.
- Periodic Inspection: Periodically check all electrical connections and mounting hardware to ensure they remain secure.
7. Troubleshooting
If your lantern is not functioning correctly, refer to the following common issues and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power to the fixture. | Check circuit breaker or fuse. Ensure wall switch is on. |
| Loose wire connections. | Turn off power and check all wire connections. Tighten if loose. | |
| Faulty bulb. | Replace bulb with a new one of the correct type and wattage. | |
| Light flickers. | Loose bulb or wiring. | Turn off power. Tighten bulb. Check wire connections. |
| Incorrect dimmer type. | Ensure dimmer is compatible with incandescent bulbs. |
If problems persist after attempting these solutions, contact a qualified electrician or customer support.
8. Specifications
| Attribute | Specification |
|---|---|
| Brand | FORTE |
| Model Number | 1301-02-04 |
| Color | Black/Small |
| Material | Glass |
| Style | Traditional |
| Light Fixture Form | Wall |
| Specific Uses | Outdoor use |
| Indoor/Outdoor Usage | Outdoor |
| Power Source | Corded Electric |
| Light Source Type | Incandescent |
| Finish Type | Black |
| Shade Material | Glass |
| Number of Light Sources | 2 |
| Voltage | 120 Volts |
| Embellishment | Crystal (refers to clear beveled glass) |
| Lighting Method | Up/Down Light |
| Item Weight | 8.4 Pounds |
| Product Dimensions | 10 x 10 x 21 inches |
| UPC | 093185003119 |
| Manufacturer | North Coast Lighting |
| Mounting Type | Protruding |
| Shade Color | Clear |
9. Warranty and Support
Warranty Information:
All products purchased have a 30-day replacement parts policy to ensure a fully working item. All products are covered under a 1-year warranty when purchased on Amazon. The warranty period begins on the day the product is originally shipped. The warranty covers all of the items and conditions identified in the original manufacturer's warranty. Some of the items specifically not covered by the warranty are loss and theft, water damage, customer abuse, and finish deterioration due to UV or coastal exposure.
Customer Support:
For technical assistance, replacement parts, or warranty claims, please contact the manufacturer, North Coast Lighting, or refer to their official website for contact information. When contacting support, please have your product model number (1301-02-04) and purchase details readily available.