Product Overview
The Stanley 19-inch Series 2000 Tool Box with Removable Tray is designed for efficient organization and secure storage of your tools and small parts. Its robust construction and thoughtful features make it an ideal solution for both professional and home use.
Key Features:
- Durable Metal Clasps: Ensures secure closure and prevents accidental opening.
- Removable Tray & Lid Storage: Includes a convenient removable tray for frequently used tools and two integrated lid organizers for small parts, accessible without opening the main compartment.
- Compact Dimensions: Measures approximately 10 inches (H) x 19 inches (W) x 10 inches (D), providing ample storage while remaining portable.
- Built-in Padlock Eye: Allows for the use of a small padlock (not included) to secure contents.
- Comfortable Grip Handle: Features a soft, wide rubber-coated handle for easy and comfortable carrying.
Components
The Stanley 19-inch Series 2000 Tool Box consists of the following main components:
- Main Storage Compartment: The primary area for larger tools.
- Removable Tool Tray: Sits inside the main compartment, providing a secondary layer for smaller tools or accessories.
- Lid Organizers (2): Integrated into the lid, these compartments are ideal for storing small items like screws, nuts, and bolts.
- Metal Latches (2): Securely fasten the lid to the main body.
- Carry Handle: Located on top of the lid for portability.
- Padlock Eye: A designated point for attaching a padlock for added security.
Product Views:
Setup and Initial Use
The Stanley 19-inch Series 2000 Tool Box requires minimal setup before use. Follow these steps to prepare your new tool box:
- Unpack: Remove the tool box from its packaging.
- Inspect: Check for any signs of damage during transit. If damaged, contact customer support.
- Open Latches: Release the two metal clasps on the front of the tool box to open the lid.
- Access Tray: The removable tool tray is located inside the main compartment. Lift it out to access the deeper storage area below.
- Utilize Lid Organizers: The two yellow compartments on the lid can be opened independently for small parts storage.
- Load Tools: Organize your tools and accessories as desired. Place smaller, frequently used items in the removable tray or lid organizers, and larger items in the main compartment.
Operating Instructions
Using your Stanley 19-inch Series 2000 Tool Box is straightforward:
Storing Tools:
- Main Compartment: Ideal for larger tools such as hammers, saws, drills, and other bulky items. Ensure items are placed securely to prevent shifting during transport.
- Removable Tray: Use this tray for hand tools like screwdrivers, wrenches, pliers, and measuring tapes that you need quick access to.
- Lid Organizers: Perfect for small components such as screws, nails, washers, electrical connectors, and drill bits. These compartments allow access without opening the entire toolbox.
Securing the Tool Box:
- Closing the Lid: Ensure the removable tray is properly seated and the lid is aligned. Press down firmly until both metal clasps engage with an audible click.
- Using a Padlock: For added security, insert a small padlock (not included) through the built-in padlock eye located on the front of the tool box, between the two clasps.
Transporting:
- Always ensure the tool box is securely latched before lifting or carrying.
- Use the integrated rubber-coated handle for comfortable and secure transport.
Care and Maintenance
To ensure the longevity and optimal performance of your Stanley 19-inch Series 2000 Tool Box, follow these simple maintenance guidelines:
- Cleaning: Wipe down the exterior and interior surfaces with a damp cloth as needed. For stubborn dirt, a mild soap solution can be used. Avoid abrasive cleaners or solvents that may damage the plastic.
- Drying: Ensure the tool box is completely dry before closing and storing, especially if storing metal tools, to prevent rust.
- Lubrication: Periodically check the metal clasps and hinges. If they become stiff, apply a small amount of silicone spray or light lubricant to ensure smooth operation.
- Storage: Store the tool box in a cool, dry place away from direct sunlight and extreme temperatures to prevent material degradation.
- Weight Capacity: Do not overload the tool box beyond its intended capacity (Maximum Weight Recommendation: 1.8 Kilograms / 3.97 lbs) to prevent damage to the handle, latches, or body.
Troubleshooting
Most issues with the Stanley 19-inch Series 2000 Tool Box are minor and can be resolved with simple checks:
| Problem | Possible Cause | Solution |
|---|---|---|
| Lid does not close securely. | Obstruction in the main compartment or tray; latches are dirty or bent. | Ensure no tools are preventing the lid from closing. Clean latches and check for damage. If latches are bent, they may need replacement. |
| Removable tray is difficult to insert/remove. | Tools in the main compartment are too high; tray is not aligned correctly. | Rearrange tools in the main compartment to allow clearance. Ensure the tray is aligned with its designated grooves. |
| Handle feels loose or wobbly. | Excessive weight; prolonged heavy use. | Reduce the weight of contents. While the handle is designed for durability, continuous overloading can cause wear. |
Specifications
| Feature | Detail |
|---|---|
| Brand | STANLEY |
| Model Number | 019151M |
| Material | Metal, Plastic |
| Color | Black/Yellow |
| Product Dimensions (L x W x H) | 19.25" x 10.25" x 9.75" |
| Water Resistance Level | Water Resistant |
| Maximum Weight Recommendation | 1.8 Kilograms (approx. 3.97 lbs) |
| Number of Compartments | 3 (Main, Removable Tray, 2 Lid Organizers) |
| Special Features | Lockable Latch (padlock not included) |
| Included Components | Tool Box (with removable tray) |
Warranty and Support
Warranty Information:
The manufacturer's warranty for the Stanley 19-inch Series 2000 Tool Box does not cover misuse of the product. Please refer to the original product packaging or the official STANLEY website for complete warranty terms and conditions.
Customer Support:
For further assistance, product inquiries, or to report any issues, please visit the official STANLEY website or contact their customer service department. Contact information can typically be found on the product packaging or the brand's official online presence.
Online Resources: www.stanleytools.com
