OSRAM 73081W Under-Cabinet Fluorescent Light Instruction Manual

1. Introduction

Thank you for choosing the OSRAM 73081W Under-Cabinet Fluorescent Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions carefully before use and retain them for future reference.

Figure 1: The OSRAM 73081W Under-Cabinet Fluorescent Light, a white, elongated fixture designed for discreet illumination.

2. Important Safety Instructions

Always follow basic safety precautions when installing or using electrical products to reduce the risk of fire, electric shock, and personal injury.

• Read all instructions: Familiarize yourself with the product and its operation before installation.
• Disconnect power: Always ensure the main power supply is switched off at the circuit breaker or fuse box before performing any installation, maintenance, or lamp replacement.
• Qualified personnel: Installation should be performed by a qualified electrician if you are unsure about electrical wiring.
• Proper voltage: Ensure the power supply voltage matches the requirements of the fixture (240V).
• Avoid moisture: Do not install or use this fixture in wet or damp locations.
• Secure mounting: Ensure the fixture is securely mounted to a stable surface to prevent it from falling.
• Do not modify: Do not attempt to modify or alter the fixture in any way, as this may void the warranty and create safety hazards.

3. Package Contents

Carefully unpack the box and ensure all items are present and undamaged. If any items are missing or damaged, contact your retailer.

• OSRAM 73081W Under-Cabinet Fluorescent Light Fixture (1 unit)
• 13W Fluorescent Lamp (pre-installed or included separately)
• Power Cable (for connection to mains supply)
• Connecting Adapter (for linking multiple units)
• Mounting Hardware (screws, clips, etc.)
• Instruction Manual (this document)

4. Installation

Follow these steps to install your OSRAM 73081W under-cabinet light. Ensure power is disconnected before beginning installation.

4.1 Mounting the Fixture

1. Choose a suitable location under a cabinet or shelf. Ensure the surface is clean, dry, and capable of supporting the fixture's weight.
2. Mark the drilling points for the mounting clips or screws using the fixture as a template.
3. Drill pilot holes if necessary and securely attach the mounting hardware to the surface.
4. Snap or slide the light fixture into the mounted clips or secure it with screws, ensuring it is firmly in place.

4.2 Electrical Connection

1. Connect the provided power cable to the designated input port on the fixture.
2. Plug the power cable into a standard 240V wall outlet.

4.3 Linking Multiple Units (Optional)

The OSRAM 73081W allows for linking up to 10 units to create a continuous light strip. Use the provided connecting adapter for this purpose.

1. Ensure both fixtures are securely mounted and power is disconnected.
2. Align the connecting ports of the two fixtures.
3. Insert the connecting adapter firmly between the two fixtures until they are securely joined.
4. Only the first fixture in the series needs to be connected to the main power supply.

Figure 2: Diagram illustrating how to connect multiple OSRAM under-cabinet lights in series using a plug adapter to form a continuous light strip.

5. Operation

Once installed and connected to power, operating the OSRAM 73081W is straightforward.

1. Power On: Restore power to the circuit at the main breaker or fuse box.
2. Switching On/Off: Locate the integrated switch on the fixture. Press the switch to turn the light on or off.

Figure 3: Angled view of the OSRAM 73081W fixture, highlighting the integrated power switch located on one end of the unit.

6. Maintenance

6.1 Cleaning

To maintain the appearance and performance of your fixture:

• Ensure the fixture is switched off and cool before cleaning.
• Wipe the exterior surfaces with a soft, dry, or slightly damp cloth.
• Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish.

6.2 Lamp Replacement

The 13W fluorescent lamp inside the fixture is replaceable. Always ensure power is disconnected before attempting lamp replacement.

1. Switch off the fixture and disconnect it from the power supply.
2. Carefully remove the clear diffuser cover. This may involve gently prying it open or sliding it off, depending on the design.
3. Gently twist or pull the old fluorescent lamp to remove it from its sockets.
4. Insert the new 13W fluorescent lamp (ensure it is the correct type and wattage) into the sockets, aligning the pins.
5. Replace the diffuser cover securely.
6. Reconnect power and test the light.

Figure 4: Top-down view of the OSRAM 73081W fixture, showing the clear cover protecting the internal fluorescent tube.

7. Troubleshooting

If you encounter issues with your OSRAM 73081W light, refer to the following common problems and solutions:

• Light does not turn on:
  • Check if the power cable is securely plugged into the outlet.
  • Ensure the wall outlet has power by testing it with another device.
  • Verify that the main power supply to the circuit is on.
  • Confirm the fixture's integrated switch is in the 'ON' position.
  • The fluorescent lamp may be faulty or at the end of its life. Replace the lamp (refer to Section 6.2).
• Light flickers or is dim:
  • The fluorescent lamp may be nearing the end of its lifespan. Replace the lamp.
  • Ensure the lamp is correctly seated in its sockets.
• Buzzing noise:
  • A slight buzzing can be normal for fluorescent fixtures. If it's excessive, ensure the lamp is properly seated. If the issue persists, contact support.

If these steps do not resolve the issue, contact customer support.

8. Specifications

9. Warranty and Support

For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. For technical support or further assistance, please visit the official OSRAM website or contact their customer service department.