Dritz My Double Deluxe Dressform (Model 20405) Instruction Manual

Product Overview

The Dritz My Double Deluxe Dressform is an adjustable garment fitting tool designed for various clothing types, including tops, blouses, shirts, jackets, skirts, and pants. Its features facilitate precise adjustments to match body measurements, aiding in garment creation and alteration.

Key Features:

• Blue Sapphire foam-backed pinnable nylon cover for easy pinning.
• 12 adjustment wheels for precise adjustments in ½-inch increments to the neck, bust, waist, hip, and back waist length.
• Designed to accommodate pants, gowns, dresses, suits, tops, and skirts.
• Shaped hips, bottom, and thighs for accurate pant fitting.
• Off-set center pole position specifically for hanging and fitting pants.
• Extended shoulders for supporting and setting in sleeves.

Setup Instructions

Carefully unpack all components and ensure all parts are present before beginning assembly. Refer to the diagrams for visual guidance.

1. Assemble the Tripod Stand:

Attach the three legs to the central base of the tripod stand. Ensure they are securely fastened. Insert the main support pole into the assembled base. Tighten any locking mechanisms to secure the pole at its lowest position initially.

Figure 1: Fully assembled tripod stand with height adjustment pole.

Figure 2: Detail of the tripod stand showing the height adjustment mechanism and hem marker attachment.

2. Attach the Dressform Body:

Carefully place the dressform body onto the top of the main support pole. The dressform has two openings at the bottom: a central opening for standard garment fitting and an off-set opening for pant fitting. Choose the appropriate opening and slide the dressform onto the pole. Secure the dressform body to the pole using the provided screws or locking mechanism. Ensure the dressform is stable and does not wobble.

Note: It may be helpful to have a second person assist in holding the dressform steady while securing it to the stand.

Operating Instructions

The Dritz My Double Deluxe Dressform features 12 adjustment wheels and an adjustable height to customize it to specific measurements. Always make adjustments incrementally and evenly.

1. Adjusting Body Measurements (Bust, Waist, Hips):

The dressform has adjustment wheels located at the bust, waist, and hip sections. There are four wheels for each section (two at the front, two at the back). To adjust a measurement:

1. Locate the adjustment wheels for the desired section (e.g., bust).
2. Turn each wheel slowly and evenly to expand or contract the dressform. Adjust all four wheels for a section in small increments to avoid binding or damage.
3. Use a tape measure to verify the circumference until the desired measurement is achieved.

Figure 3: Detail of an adjustment wheel used for modifying body measurements.

Figure 4: Front view of the dress form, highlighting the adjustable bust, waist, and hip sections.

Figure 5: Side view of the dress form, illustrating the contours and adjustment points.

Figure 6: Back view of the dress form, showing the rear adjustment wheels.

2. Adjusting Neck and Back Waist Length:

The neck circumference can be adjusted using a dedicated wheel. The back waist length is adjusted by loosening internal screws and sliding the upper torso section up or down. Ensure these screws are tightened securely after adjustment.

Figure 7: Detail of the neck and shoulder area, including the neck adjustment mechanism.

3. Adjusting Height and Hem Marker:

The overall height of the dressform can be adjusted by loosening the locking mechanism on the main support pole and sliding the dressform up or down. Re-tighten the mechanism firmly once the desired height is reached. The included hem marker can be attached to the pole to assist in marking garment hems accurately.

4. Pant Fitting Feature:

For fitting pants, utilize the off-set pole position. This allows pants to hang naturally, providing a more accurate fit. To switch to pant fitting, remove the dressform from the central pole, and re-attach it using the off-set opening at the bottom of the dressform body.

Maintenance

• Cleaning: Wipe the dressform's nylon cover with a damp cloth as needed. Avoid harsh chemicals that may damage the fabric or foam.
• Pinning: When pinning fabric to the dressform, insert pins parallel to the surface to prevent damage to the foam backing and ensure secure placement.
• Storage: Store the dressform in a dry, temperate environment. If disassembling for storage, ensure all parts are kept together.
• Lubrication: Periodically check adjustment mechanisms. If they become stiff, a small amount of silicone spray lubricant can be applied to the internal moving parts, avoiding contact with the fabric cover.

Troubleshooting

Specifications

Warranty and Support

Warranty: The manufacturer's warranty description is noted as "N." Please refer to the product packaging or contact Dritz directly for specific warranty information.

Customer Support: For further assistance, troubleshooting, or inquiries regarding your Dritz My Double Deluxe Dressform, please visit the official Dritz website or contact their customer service department. Contact information can typically be found on the product packaging or their official website.

You can visit the Dritz Store for more information: Dritz Store on Amazon