1. Product Overview
The Keeney 1903K Extension Tube is a durable plumbing component designed for use in various sink and drain installations. Constructed from 22-gauge brass and finished with chrome plating, it provides both reliability and a polished appearance for exposed plumbing. This 12-inch long tube features a 1.25-inch inlet and a slip joint connection for straightforward integration into your plumbing system.
Image 1.1: The Keeney 1903K 22 Gauge Chrome Extension Tube. This image displays the chrome-plated brass tube, highlighting its smooth finish and standard dimensions.
Key Features:
- Durable Construction: Made from 22-gauge brass for long-lasting performance.
- Chrome Plated Finish: Provides a high-luster, corrosion-resistant surface.
- Easy Installation: Features a slip joint connection for simple setup.
- Standard Dimensions: 1.25-inch inlet and 12-inch length for common applications.
2. Specifications
| Attribute | Detail |
|---|---|
| Model Number | 1903K |
| Material | 22-Gauge Brass |
| Finish | Chrome Plated |
| Inlet Size | 1.25 Inches |
| Length | 12 Inches |
| Connection Type | Slip Joint |
| Product Dimensions (L x W) | 12"L x 1.25"W |
| Item Weight | 0.01 Ounces |
| UPC | 046224005797 |
3. Installation
This extension tube is designed for straightforward installation using a slip joint connection. Ensure all necessary nuts and washers are present before beginning. Proper sealing is crucial to prevent leaks.
Installation Steps:
- Preparation: Turn off the water supply to the sink or fixture where the extension tube will be installed. Clear the work area and have a bucket ready to catch any residual water.
- Disassembly (if replacing): If replacing an existing tube, carefully loosen and remove the old component. Clean any debris from the connecting pipes.
- Positioning: Place the new Keeney 1903K extension tube into position, aligning it with the existing drain components.
- Connect Slip Joint: Slide the slip joint nut and washer onto the connecting pipe. Insert the extension tube into the pipe, ensuring the washer is properly seated.
- Tighten Connections: Hand-tighten the slip joint nut, then use a wrench to gently tighten it further. Avoid over-tightening, which can damage the washer or pipe.
- Test for Leaks: Turn the water supply back on and check all connections for any signs of leakage. If leaks occur, gently tighten the nuts further or re-seat the washers.
Image 3.1: Example of a plumbing setup under a sink, showing an extension tube integrated into the drain system. This illustrates a typical installation scenario for the product.
4. Maintenance
The Keeney 1903K Extension Tube requires minimal maintenance due to its durable brass construction and chrome finish. Regular inspection and cleaning will help maintain its appearance and functionality.
Maintenance Tips:
- Regular Cleaning: Clean the chrome surface with a soft cloth and mild, non-abrasive cleaner to prevent water spots and maintain its luster. Avoid harsh chemicals or abrasive pads.
- Leak Inspection: Periodically check all connections for any signs of leaks, especially after initial installation or if the plumbing system has been disturbed.
- Corrosion Check: While chrome-plated brass is resistant to corrosion, inspect for any signs of wear or damage, particularly in areas with high moisture or chemical exposure.
5. Troubleshooting
Most issues with an extension tube are related to leaks. Follow these steps if you encounter a problem.
Common Issues and Solutions:
- Leak at Slip Joint Connection:
- Ensure the slip joint nut is adequately tightened.
- Verify that the washer is correctly seated and not damaged. Replace if necessary.
- Check for any burrs or imperfections on the pipe ends that might prevent a proper seal.
- Slow Drainage:
- This is typically not caused by the extension tube itself unless it is obstructed. Inspect the entire drain system for clogs.
6. Warranty & Support
Keeney stands by its products with a Limited Warranty. For specific details regarding the warranty period and coverage, please refer to the documentation included with your purchase or visit the official Keeney website.
Customer Support:
If you have questions, require technical assistance, or need to make a warranty claim, please contact Keeney customer support through their official website or the contact information provided in your product packaging. When contacting support, please have your product model number (1903K) and purchase information readily available.
Website: www.keeneymfg.com (Example link, please verify official website)