StarTech M1VGAUSB6

StarTech.com M1VGAUSB6 M1 to VGA Projector Cable with USB Instruction Manual

Model: M1VGAUSB6

Brand: StarTech.com

1. Introduction

This manual provides instructions for the StarTech.com M1VGAUSB6 M1 to VGA Projector Cable with USB. This cable is designed to transmit analog video signals and USB data, facilitating presentations from a laptop computer to a projector. The integrated USB capability supports the use of a wireless presenter or other USB devices.

The M1VGAUSB6 cable features an M1 (also known as EVC or P&D) connector and is compatible with various projectors, including models from Proxima, Dell, Hitachi, Infocus, Toshiba, and Viewsonic.

2. Package Contents

  • 1 x StarTech.com M1VGAUSB6 M1 to VGA Projector Cable with USB

3. Product Overview

The StarTech.com M1VGAUSB6 cable connects devices with an M1-DA port (typically projectors) to devices with a VGA (HD-15) port and a USB port (typically laptops or PCs).

StarTech.com M1VGAUSB6 cable with M1-DA, VGA, and USB connectors
This image displays the M1-DA (right) and VGA (left) connectors of the StarTech.com M1VGAUSB6 cable, along with the integrated USB connector. The M1-DA connector is a multi-pin connector designed for digital and analog video, while the VGA connector is a standard 15-pin analog video connector. The USB connector provides power and data for compatible devices.
StarTech.com M1VGAUSB6 cable coiled
This image shows the entire StarTech.com M1VGAUSB6 cable coiled, highlighting its 6-foot length and the M1-DA, VGA, and USB connectors. The cable is black and designed for durability.

4. Setup Instructions

  1. Identify Ports: Locate the M1-DA port on your projector and the VGA and USB ports on your computer (laptop or PC).
  2. Connect M1-DA: Connect the M1-DA (Male) end of the cable to the M1-DA port on your projector. Ensure a secure connection.
  3. Connect VGA: Connect the HD-15 (Male) end of the cable to the VGA port on your computer. Tighten the screws on the VGA connector, if available, to prevent accidental disconnection.
  4. Connect USB: Connect the USB (Male) end of the cable to an available USB port on your computer. This connection is necessary for USB functionality, such as powering a wireless presenter.
  5. Power On Devices: Turn on your projector and computer.

5. Operating Instructions

  1. Select Input Source: On your projector, use the remote control or on-device buttons to select the correct input source (e.g., "M1," "VGA," or "Computer"). Refer to your projector's manual for specific instructions.
  2. Configure Display Settings (Computer):
    • Windows: Right-click on the desktop, select "Display settings" or "Screen resolution." Choose "Duplicate these displays" or "Extend these displays" as needed.
    • macOS: Go to "System Preferences" > "Displays." Select "Arrangement" to configure mirroring or extended desktop.
  3. Verify Display: Confirm that the computer's display is correctly projected onto the screen.
  4. Utilize USB Functionality: If using a wireless presenter or other USB device, ensure it is connected to the USB port on the cable and functioning correctly.

6. Troubleshooting

No Image on Projector

  • Check Connections: Ensure all cable connections (M1-DA, VGA, USB) are secure and fully inserted.
  • Verify Input Source: Confirm the projector's input source is set to the correct M1/VGA input.
  • Computer Display Settings: Check your computer's display settings to ensure the output is configured for an external display (duplicate or extend).
  • Cable Integrity: Inspect the cable for any visible damage. Try a different cable if available to rule out a faulty cable.
  • Projector Compatibility: Ensure your projector model is listed as compatible or uses an M1-DA port.

Image Quality Issues (Flickering, Color Distortion)

  • Secure VGA Connection: Ensure the VGA connector screws are tightened to prevent signal interference.
  • Cable Length: While this cable is 6ft, very long cable runs can sometimes introduce signal degradation. This cable is designed for optimal performance at its specified length.
  • Interference: Keep the cable away from sources of electromagnetic interference.

USB Device Not Working

  • USB Connection: Ensure the USB connector is firmly plugged into both the cable and the computer.
  • Computer USB Port: Try connecting the USB end to a different USB port on your computer.
  • Device Drivers: Ensure any necessary drivers for your USB device are installed on your computer.

7. Specifications

FeatureDetail
ModelM1VGAUSB6
BrandStarTech.com
Cable TypeM1 to VGA Projector Cable with USB
Connector 1M1-DA (Male)
Connector 2HD-15 (VGA) (Male)
Connector 3USB (Male)
Cable Length6 ft (1.8 m)
ColorBlack
Compatible DevicesLaptop, PC, Projector
Product Dimensions7.87 x 0.79 x 8.46 inches
Item Weight1.6 ounces

Note: Specifications are subject to change without notice.

8. Warranty and Support

For warranty information and technical support, please refer to the official StarTech.com website or contact their customer service department. Keep your purchase receipt for warranty claims.

Online Support: www.startech.com/support

Related Documents - M1VGAUSB6

Preview StarTech.com USB to VGA Adapter - 1440x900 (USB2VGAE2) | External Video Adapter
StarTech.com USB2VGAE2 is a USB 2.0 to VGA external video adapter for multi-monitor solutions. Supports resolutions up to 1440x900, ideal for office applications and extending desktop displays. Includes driver and software.
Preview Acer Aspire S7 Ultrabook HDMI till VGA och USB 3.0 Gigabit Ethernet Tillbehörspaket
Detta tillbehörspaket från StarTech.com för Acer Aspire S7 Ultrabook innehåller en HDMI till VGA-adapter och en USB 3.0 till Gigabit Ethernet-adapter med USB-genomströmningsport. Utöka anslutningsmöjligheterna för din Ultrabook med adaptrar för externa skärmar och trådbundna nätverk.
Preview StarTech.com DKM31C3HVCPD USB-C 10Gbps Docking Station Quick-Start Guide | HDMI, VGA, Ethernet, PD
Quick-start guide for the StarTech.com DKM31C3HVCPD USB-C 10Gbps docking station. Learn how to connect multiple monitors (HDMI, VGA), USB devices, and Ethernet, plus utilize 100W Power Delivery pass-through.
Preview StarTech.com USB 3.0 to 2.5" SATA HDD/SSD Cable w/UASP | USB3S2SAT3CB Manual
Instruction manual for the StarTech.com USB 3.0 to 2.5-inch SATA HDD/SSD Cable with UASP (model USB3S2SAT3CB), covering product overview, installation, operation, specifications, technical support, and warranty information.
Preview StarTech.com DKM31C3HVCPD USB-C Docking Station - Triple Monitor, 10Gbps, HDMI, VGA, Ethernet
Quick start guide for the StarTech.com DKM31C3HVCPD USB-C docking station. Learn how to connect triple monitors (HDMI/VGA), high-speed USB-A and USB-C peripherals, and Gigabit Ethernet. Includes installation steps and product specifications.
Preview StarTech.com DKT30CHVPD2 USB-C Multiport Adapter - HDMI, VGA, 3x USB, GbE, 100W PD - Quick Start Guide
Quick start guide for the StarTech.com DKT30CHVPD2 USB-C Multiport Adapter. Learn about its features, specifications, connections for HDMI, VGA, USB-A, USB-C, GbE, and 100W Power Delivery. Includes setup and operation details.