Introduction
The Vicks SpeedRead V912US Digital Thermometer is designed to provide quick and accurate temperature readings. This device features a unique Fever InSight color-coded display for easy interpretation of results, a memory function to recall the last reading, and is suitable for oral, rectal, or underarm use. It is water-resistant for convenient cleaning and includes an automatic shut-off feature to conserve battery life.
Image: The Vicks SpeedRead V912US Digital Thermometer, showing its sleek design with a digital display and power button.
Important Safety Information
- High, prolonged fever requires medical attention, especially for young children. Please contact your physician.
- Do not allow children to take their temperatures unattended.
- Do not allow children to walk or run during temperature taking.
- For 15 minutes prior to use, avoid eating or drinking any liquids, exercising, taking showers or baths, or smoking to ensure accurate readings.
Product Features
- Quick, Accurate Results: Provides readings in approximately 8 seconds with an accuracy of +/- 0.2°F in laboratory testing.
- Fever InSight Display: Color-coded screen (Green for normal, Yellow for elevated, Red for high) for easy temperature interpretation.
- Versatile Use: Suitable for oral, rectal, or underarm temperature measurement for adults, infants, toddlers, and children.
- Memory Function: Recalls and displays the last temperature taken.
- Water Resistant: Designed for easy and thorough cleaning.
- Automatic Shut-off: Extends battery life.
- Includes: Storage case and battery.
Image: The Vicks SpeedRead thermometer displaying a temperature, highlighting the Fever InSight feature with its color-coded screen.
Setup and Battery Installation
Battery Installation
- The thermometer comes with one CR1632 Lithium Ion battery pre-installed.
- To replace the battery, locate the battery cover on the back of the unit.
- Use a small flathead screwdriver or a long fingernail to unscrew the battery cover.
- Remove the old battery and insert a new CR1632 battery with the positive (+) side facing up.
- Securely replace the battery cover.
Note: If the display shows partial numbers or ghosted digits, it may indicate a low battery. Replacing the battery should resolve this issue.
Preparation for Use
Before taking a temperature, ensure the thermometer tip is at room temperature. If the metal tip is cold, gently warm it between your fingers or in the palm of your hand before turning the device on and taking a reading. This helps ensure consistent and accurate measurements.
Operating Instructions
Taking a Temperature
- Press the power button to turn on the thermometer. The display will show the last recorded temperature briefly, then a blinking '°F' (or '°C' if applicable) indicating it's ready.
- Position the thermometer according to the desired measurement method:
- Oral Use: Place the tip well under the tongue. Close mouth and hold the thermometer in place.
- Rectal Use (for infants/babies): Apply a water-soluble lubricant to the tip. Gently insert the tip no more than 1/2 inch into the rectum.
- Underarm (Axillary) Use: Place the tip in the armpit so the tip touches the skin. Hold the arm firmly against the body.
- Hold the thermometer steady until you hear a continuous beeping sound, indicating the measurement is complete (approximately 8 seconds).
- Remove the thermometer and read the temperature displayed on the screen.
Image: A child sleeping, with the Vicks SpeedRead thermometer being used under their arm, demonstrating underarm temperature measurement.
Understanding Fever InSight
The Fever InSight feature provides a color-coded backlight to help interpret temperature readings quickly:
- Green Display: Indicates a normal temperature.
- Yellow Display: Signifies an elevated temperature (mild fever).
- Red Display: Indicates a high temperature (high fever).
Image: A graphic illustrating the Fever InSight color codes: green for normal temperature (e.g., 98.6°F), yellow for mild fever (e.g., 99.9°F), and red for high fever (e.g., 101.5°F).
Memory Function
When the thermometer is turned on, it will briefly display the last temperature reading taken before showing the ready-to-measure indicator.
Maintenance and Cleaning
Cleaning Instructions
To clean the thermometer:
- Wash the thermometer with soap and warm water.
- Alternatively, wipe it with rubbing alcohol (70% isopropyl alcohol).
- Wipe dry with a soft cloth.
- Do not boil or clean in a dishwasher. This will damage the thermometer and void the warranty.
- Do not wash the unit with any thinner or chemical solvent.
Storage
Store the thermometer in its provided storage case when not in use to protect it from damage.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Inaccurate or inconsistent readings | Cold metal tip; improper placement; low battery. | Warm the metal tip before use. Ensure proper placement for the chosen method. Replace the battery if low. Avoid eating, drinking, exercising, or smoking 15 minutes prior to use. |
| Display shows partial numbers or is dim | Low battery. | Replace the CR1632 battery. |
| Thermometer does not turn on | Dead battery; incorrect battery insertion. | Replace the CR1632 battery. Ensure the battery is inserted correctly with the positive (+) side up. |
Specifications
- Model Number: V912US
- Product Dimensions: 1.2 x 3.2 x 7.4 inches; 1.76 ounces
- Battery: 1 x CR1632 Lithium Ion battery (included)
- Display Type: Digital, Color-coded (Fever InSight)
- Measurement Time: Approximately 8 seconds
- Accuracy: +/- 0.2°F in laboratory testing
- Special Feature: Fast Reading System, Water Resistant
- Color: Blue, White
- Outer Material: Plastic
- Manufacturer: Spartan Nash Company (US HPC)
- Date First Available: July 12, 2006
Image: The Vicks SpeedRead thermometer with an overlay indicating its approximate dimensions: 0.5 inches in thickness and 4.5 inches in length.
Warranty and Support
The Vicks SpeedRead V912US Digital Thermometer comes with a limited 1-year warranty.
For support or warranty claims, please refer to the contact information provided on the product packaging or visit the official Vicks website.
