BOSS BR-600 Digital Multitrack Recorder User Manual

Introduction

This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your BOSS BR-600 Digital Multitrack Recorder. Please read this manual thoroughly to ensure proper use and to maximize the performance and longevity of your device.

Figure 1: Front view of the BOSS BR-600 Digital Multitrack Recorder, showing the display, faders, and control buttons.

1. Setup

1.1 Unpacking and Inspection

Carefully remove the BR-600 from its packaging. Verify that all components are present:

• BOSS BR-600 Digital Multitrack Recorder
• 128MB CompactFlash memory card
• Owner's Manual (this document)
• AC Adapter (Note: AC adapter may be sold separately.)

Inspect the unit for any signs of damage. If any items are missing or damaged, contact your retailer immediately.

1.2 Power Supply

The BR-600 can be powered by either an AC adapter or batteries.

Using the AC Adapter

Connect the recommended BOSS PSA-series AC adapter (not included) to the DC IN jack on the rear panel of the BR-600. Plug the adapter into a standard AC outlet.

Using Batteries

The BR-600 requires AA batteries for portable operation. Open the battery compartment on the bottom of the unit and insert the batteries, ensuring correct polarity. Close the compartment securely.

1.3 Inserting a CompactFlash Card

The BR-600 uses CompactFlash cards for recording and storing data. A 128MB card is included. For optimal performance, use BOSS-recommended CompactFlash cards. Insert the card into the CompactFlash slot on the right side of the unit until it clicks into place. To remove, press the card gently to eject it.

2. Operating Instructions

2.1 Basic Controls Overview

Familiarize yourself with the main controls:

• Display Screen: Shows track status, time, and menu information.
• Track Mixer Faders: Adjust volume levels for individual tracks (1-8, Rhythm, L/R).
• Input Knobs: Control input levels for MIC 1, MIC 2/GUITAR/BASS, and REC LEVEL.
• Transport Controls: PLAY, REC, STOP, REW, FF, ZERO, A-B Repeat.
• Cursor Buttons: Navigate menus and adjust values.
• PAD Button: Activates the drum pads for rhythm programming.

Figure 2: Close-up of the BOSS BR-600's control panel, highlighting the display, faders, and various function buttons.

2.2 Recording a Track

1. Connect Input: Plug your instrument (guitar/bass) into the GUITAR/BASS (Hi-Z) input or a microphone into MIC 1 or MIC 2.
2. Select Input Source: Press the INPUT button to cycle through GUITAR, MIC, or LINE.
3. Select Track: Press the desired track button (e.g., 1, 2, 3, 4, 5/6, 7/8) to arm it for recording. The button will illuminate.
4. Adjust Input Level: Use the corresponding input knob (e.g., GUITAR/BASS/MIC 2, MIC 1) and the REC LEVEL knob to set the recording level. Ensure the PEAK indicator does not light up consistently.
5. Start Recording: Press the REC button (it will blink), then press the PLAY button to begin recording.
6. Stop Recording: Press the STOP button.

2.3 Using Effects and Drum Machine

The BR-600 features a powerful guitar and effects processor, including vocal effects and a pitch corrector, as well as a built-in drum machine.

Effects Processor (COSM)

Press the EFFECTS button to access the COSM effects. Use the cursor buttons and TIME/VALUE dial to select and adjust various effects like distortion, delay, reverb, and more. Effects can be applied to inputs during recording or to tracks during mixing.

Drum Machine

Press the PAD button to activate the velocity-sensitive drum pads. You can select preset rhythms or create your own patterns. The drum machine has its own dedicated stereo track, not consuming any of the 8 recording tracks.

• RHYTHM ON/OFF: Toggles the drum machine on or off.
• PATTERN: Selects drum patterns.
• RHYTHM EDIT: Allows editing of drum patterns.

2.4 Mixing and Mastering

After recording, use the track mixer faders to adjust the balance of your tracks. The MASTER fader controls the overall output level. The BR-600 also includes mastering tools to finalize your mix.

• BOUNCE: Allows you to combine multiple tracks into one or two new tracks, freeing up tracks for further recording.
• MASTERING: Access mastering effects to polish your final mix.

3. Maintenance

3.1 Cleaning

Wipe the unit with a soft, dry cloth. For stubborn dirt, use a slightly damp cloth and then dry thoroughly. Do not use abrasive cleaners, waxes, or solvents.

3.2 Storage

When not in use for extended periods, remove batteries to prevent leakage. Store the BR-600 in a cool, dry place away from direct sunlight and extreme temperatures.

3.3 Data Backup

Regularly back up your recorded data from the CompactFlash card to a computer. The BR-600 supports USB connectivity for data transfer. Refer to the BOSS website for necessary software and drivers.

4. Troubleshooting

5. Specifications

• Model: BR-600
• Tracks: 8 simultaneous playback tracks, 64 V-Tracks
• Recording Media: CompactFlash card (128MB card included)
• Effects: Powerful guitar and effects processor (COSM), vocal FX, pitch corrector
• Drum Machine: Built-in, with velocity-sensitive pads
• Microphone: Built-in stereo microphone
• Power Supply: AC adapter (PSA series, sold separately) or AA batteries
• Dimensions: Approximately 1.08 x 0.75 x 0.25 inches (27.4 x 19.1 x 6.4 mm)
• Weight: Approximately 3.57 pounds (1.62 kg)
• Connectivity: USB, 3.5mm Headphones Jack
• Screen Size: 2.7 Inches
• Material: Plastic
• Color: Silver, Black, Grey

6. Support and Warranty Information

6.1 Customer Support

For technical assistance, product inquiries, or service, please visit the official BOSS website or contact your local BOSS distributor. Online resources may include FAQs, driver downloads, and additional support documentation.

Official BOSS Store: https://www.amazon.com/stores/BOSS/page/0F53D580-E073-48C0-B5A2-B7562B77890D

6.2 Warranty

Information regarding the product warranty is typically provided with your purchase documentation or can be found on the official BOSS website. Please retain your proof of purchase for warranty claims.