Introduction
This manual provides essential information for the proper installation, function, and maintenance of the SKF Seal 19773. This product is an aftermarket replacement part designed for specific automotive applications. Adhering to the guidelines in this manual will help ensure the longevity and optimal performance of your SKF Seal.
Product Overview
The image above displays the SKF Seal 19773, a circular automotive seal with a dark rubber-like inner ring and a metallic outer casing. It is designed to prevent leakage and protect components within an automotive system.
The SKF Seal 19773 is a high-quality aftermarket replacement part. It is engineered to meet or exceed original equipment specifications, ensuring reliable performance and durability in demanding automotive environments.
What's in the Box
- 1 x SKF Seal 19773
Compatibility
The SKF Seal 19773 is compatible with the following vehicle makes and model years:
- Ford: 1975-1978
- Lincoln: 1977-1980
- Mercedes-Benz: 1988-1991
- Mercury: 1975-1978
Setup and Installation
Proper installation is crucial for the optimal performance and longevity of the SKF Seal 19773. It is highly recommended that installation be performed by a qualified automotive technician using appropriate tools and following vehicle manufacturer's service procedures.
- Ensure the area where the seal will be installed is meticulously clean and free of debris, old gasket material, or residual lubricants.
- Inspect the mating surfaces for any damage, nicks, or irregularities that could compromise the seal's integrity. Repair or replace damaged surfaces if necessary.
- Apply a thin, even coat of appropriate lubricant (e.g., clean engine oil or grease, as specified by vehicle manufacturer) to the seal's lip before installation to aid in smooth seating and prevent damage.
- Carefully align the seal with its housing, ensuring it is oriented correctly.
- Use a seal driver tool or an appropriate-sized socket to gently and evenly press the seal into place. Avoid hammering directly on the seal, which can cause deformation or damage.
- Ensure the seal is seated squarely and fully within its bore. Do not over-press or deform the seal.
- Reassemble surrounding components according to vehicle manufacturer specifications, paying attention to torque values for fasteners.
Operating Principles
The SKF Seal 19773 functions as a critical barrier to prevent the leakage of vital fluids (such as oil or grease) and to keep harmful contaminants (like dirt, dust, and moisture) out of sensitive internal automotive components. Once installed, it maintains a tight, dynamic fit against rotating or reciprocating shafts, ensuring the integrity of the sealed system. Its precision design allows for smooth operation while effectively containing lubricants and protecting internal parts from external elements, contributing to the overall efficiency and lifespan of the vehicle's system.
Maintenance
Seals are generally maintenance-free components once installed correctly. However, regular inspection of the sealed area during routine vehicle maintenance is recommended to detect potential issues early.
- Periodically check for any visible signs of fluid leakage or weeping around the seal.
- Listen for unusual noises (e.g., squealing, grinding) that might indicate a failing or improperly seated seal.
- If leakage, unusual noises, or other signs of wear are detected, professional inspection and timely replacement of the seal may be necessary to prevent further damage to associated components.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Fluid Leakage | Improper installation, Damaged seal, Worn mating surface, Incorrect seal type | Re-install correctly, Replace seal, Inspect and repair mating surface, Verify correct part number |
| Premature Wear | Incorrect lubricant, Contamination, Misalignment, Excessive temperature | Use specified lubricant, Ensure clean environment during installation, Check alignment, Address overheating issues |
| Unusual Noise (e.g., Squealing) | Dry running, Improper fit, Damaged lip | Ensure proper lubrication, Verify correct seal size and installation, Inspect seal for damage |
Specifications
- Brand: SKF
- Model Number: 19773
- Manufacturer: SKF USA, Inc.
- Product Type: Auto Part
- Item Weight: 0.96 ounces (approx. 0.06 pounds)
- Product Dimensions: 3.13 x 3.13 x 0.63 inches (Length x Width x Height)
- Exterior Finish: Machined
- ASIN: B000EPP934
- Date First Available: January 1, 2006
Warranty and Support
SKF products are manufactured to high standards of quality and performance. For specific warranty information, terms, and conditions related to the SKF Seal 19773, please refer to the official SKF website or contact their customer service directly. It is advisable to retain your purchase receipt as proof of purchase for any warranty claims.
Online Resources: www.skf.com
Customer Service: Please visit the official SKF website for regional contact information, including phone numbers and email support.
