Intermatic CS17K Malibu Outdoor One-Light Mission Walk Light Instruction Manual

1. Introduction and Product Overview

This manual provides instructions for the installation, operation, and maintenance of your Intermatic CS17K Malibu Outdoor One-Light Mission Walk Light. This solid metal walk light is designed for outdoor use with 12-volt landscape lighting systems. It features Fast Lock II connectors and utilizes an 11-watt wedge base bulb, offering a straightforward and safe installation process to illuminate pathways, gardens, and outdoor areas.

Image 1.1: The Intermatic CS17K Malibu Outdoor One-Light Mission Walk Light, showcasing its antique copper finish and frosted panels.

2. Safety Information

Please read and understand all instructions before installing or operating this product. Failure to follow these instructions may result in electric shock, fire, or other hazards.

• Low Voltage System: This light is designed for use with 12-volt landscape lighting systems only. Do not connect to 120-volt household power.
• Outdoor Use: This product is intended for outdoor use in wet locations. Ensure all connections are secure and protected from moisture.
• Electrical Connections: All electrical connections should be made in accordance with local codes and ordinances. If you are unsure about wiring, consult a qualified electrician.
• Bulb Handling: Always disconnect power before changing the bulb. Allow the bulb to cool completely before touching it. Use only the specified 11-watt wedge base bulb.
• Placement: Position the light securely to prevent tipping. Avoid placing the light where it could be a tripping hazard or obstruct pathways.

3. Package Contents

Verify that all components are present before beginning installation:

• One (1) Intermatic CS17K Malibu Outdoor One-Light Mission Walk Light fixture
• One (1) 11-watt wedge base bulb
• Fast Lock II connectors (pre-attached or included for connection to main cable)

4. Setup and Installation

This walk light is designed for simple and safe installation with existing or new 12-volt landscape lighting systems.

1. Plan Placement: Determine the desired location for your walk light. Ensure the location allows for proper illumination and is within reach of your 12-volt landscape lighting cable.
2. Prepare Wiring: Ensure the main 12-volt landscape lighting system is turned OFF at the power source (transformer).
3. Insert Bulb: Carefully insert the 11-watt wedge base bulb into the light fixture's socket. Avoid touching the glass portion of the bulb with bare hands.
4. Connect to Cable: Locate the Fast Lock II connectors on the light fixture. Position the connectors over the main 12-volt landscape lighting cable. Close the connectors firmly until they pierce the cable insulation and make contact with the wires. Ensure a secure connection.
5. Secure Fixture: Push the ground stake firmly into the soil at the desired location. Ensure the light fixture is stable and upright.
6. Test System: Once all lights are connected and secured, turn ON the power to your 12-volt landscape lighting system at the transformer. Verify that the walk light illuminates properly.

Image 4.1: The Intermatic CS17K walk light installed in an outdoor garden setting, demonstrating typical placement.

5. Operating Instructions

The Intermatic CS17K Malibu Outdoor One-Light Mission Walk Light operates as part of your existing 12-volt landscape lighting system. Its operation is controlled by the main transformer or timer connected to your landscape lighting circuit.

• Automatic Operation: If your 12-volt landscape lighting system is connected to a timer or photocell, the walk light will turn on and off automatically according to the programmed schedule or ambient light conditions.
• Manual Operation: If your system is controlled by a manual switch, the light will turn on when the switch is activated and turn off when deactivated.

Refer to the instruction manual of your 12-volt landscape lighting transformer or timer for specific operational details of your overall system.

6. Maintenance

Regular maintenance ensures optimal performance and extends the lifespan of your walk light.

• Bulb Replacement: If the light fails to illuminate, first check the bulb. Disconnect power to the system, allow the bulb to cool, then carefully remove and replace the 11-watt wedge base bulb.
• Cleaning: Periodically clean the light fixture with a soft, damp cloth to remove dirt, dust, and debris. Avoid abrasive cleaners that could damage the finish.
• Connection Check: Annually inspect the Fast Lock II connectors to ensure they remain securely attached to the main cable and are free from corrosion.
• Finish Care: The antique copper finish may naturally patina over time due to outdoor exposure. Cleaning with a soft, damp cloth can help maintain its appearance.

7. Troubleshooting

If your Intermatic CS17K walk light is not functioning correctly, refer to the following common issues and solutions:

• Light Does Not Turn On:
  • Check if the main 12-volt landscape lighting system is receiving power and is turned on.
  • Verify that the 11-watt wedge base bulb is properly seated and not burnt out. Replace if necessary.
  • Inspect the Fast Lock II connectors for a secure connection to the main cable. Ensure the pins have pierced the cable insulation.
  • Check the main landscape lighting transformer for proper operation and fuse integrity.
• Light is Dim or Flickering:
  • Ensure the bulb is fully inserted and not loose.
  • Check for corrosion at the bulb socket or connectors. Clean if necessary.
  • Verify that the 12-volt landscape lighting system is not overloaded. Too many lights on one circuit can cause dimming.

If these steps do not resolve the issue, contact Intermatic Customer Support.

8. Specifications

9. Warranty and Support

The Intermatic CS17K Malibu Outdoor One-Light Mission Walk Light is backed by a 6-year limited warranty. This warranty covers defects in materials and workmanship under normal use.

For warranty claims, technical assistance, or further inquiries, please contact Intermatic Customer Support. Keep your purchase receipt as proof of purchase for warranty purposes.

Intermatic Customer Support:
Please visit the official Intermatic website or refer to your product packaging for the most current contact information.