Standard Motor Products LX607 Ignition Control Module Instruction Manual

1. Introduction

Welcome to the instruction manual for your Standard Motor Products LX607 Ignition Control Module. This document provides essential information regarding the product's overview, installation, function, and specifications. Please read this manual thoroughly before installation and use to ensure proper operation and longevity of the module.

2. Product Overview

The Standard Motor Products LX607 is an Intermotor Ignition Control Module designed for specific automotive applications. It serves as a critical component in the vehicle's ignition system, managing the timing and delivery of electrical signals to the ignition coils.

Key Features:

• Product Type: Automotive Part
• Designed for: 1991-1996 Dodge Stealth and 1991-1999 Mitsubishi 3000GT
• Dimensions: Approximately 4.25 x 3.44 x 4.25 inches (L x W x H)
• Weight: Approximately 0.23 Pounds (3.68 ounces)
• Mounting Type: Flange Mount
• Output Type: Push-Pull

Image: The Standard Motor Products LX607 Ignition Control Module, a black rectangular electronic component with two brass mounting holes and two electrical connectors.

3. Installation Guidelines

Installation of the LX607 Ignition Control Module requires automotive technical knowledge and should ideally be performed by a qualified mechanic. Incorrect installation can lead to vehicle malfunction or damage to the component.

General Steps (Consult Vehicle Service Manual for Specifics):

1. Safety First: Disconnect the vehicle's battery before beginning any work on the electrical system.
2. Locate the Existing Module: Identify the current ignition control module in your vehicle. Refer to your vehicle's service manual for its exact location.
3. Disconnect Wiring: Carefully disconnect all electrical connectors attached to the old module. Note their positions for reinstallation.
4. Remove Old Module: Unbolt or unclip the old module from its mounting location.
5. Install New Module: Position the Standard Motor Products LX607 module in the same location. Secure it using the existing mounting hardware.
6. Reconnect Wiring: Reattach all electrical connectors to the new module, ensuring they are firmly seated.
7. Reconnect Battery: Reconnect the vehicle's battery.
8. Test System: Start the vehicle and check for proper engine operation and any diagnostic trouble codes.

Disclaimer: These are general guidelines. Always refer to your specific vehicle's service manual for detailed, model-specific installation instructions and safety precautions.

4. Operating Principles

The Standard Motor Products LX607 Ignition Control Module functions automatically as part of your vehicle's engine management system. It receives signals from the engine control unit (ECU) and precisely controls the primary circuit of the ignition coils, ensuring that spark plugs fire at the correct time for optimal engine performance and fuel efficiency.

There are no user-adjustable settings or operational controls on the module itself. Its operation is integral to the vehicle's electronic systems.

5. Maintenance

The LX607 Ignition Control Module is a sealed electronic component and requires no routine maintenance. It is designed for long-term reliability under normal operating conditions.

Inspection:

• Periodically inspect the module and its connectors for any signs of physical damage, corrosion, or loose connections.
• Ensure the mounting remains secure.

If any issues are observed, consult a qualified automotive technician.

6. Troubleshooting

If your vehicle experiences ignition-related issues after module installation, consider the following:

• No Start/Rough Idling: Double-check all electrical connections to the module and ensure they are secure. Verify that the module is correctly mounted.
• Check Engine Light: If the Check Engine Light illuminates, retrieve any diagnostic trouble codes (DTCs) using an OBD-II scanner. These codes can help pinpoint the specific issue.
• Intermittent Issues: Intermittent problems can sometimes be caused by poor electrical contacts or heat-related failures. Ensure proper heat dissipation if applicable.
• Compatibility: Confirm that the LX607 module is the correct part number for your specific vehicle year, make, and model.

Note: Diagnosing ignition system problems can be complex. If you are unsure, it is recommended to seek assistance from a certified automotive technician.

7. Specifications

8. Warranty and Support

For information regarding warranty coverage and technical support for your Standard Motor Products LX607 Ignition Control Module, please refer to the official Standard Motor Products website or contact their customer service directly. Keep your purchase receipt as proof of purchase.

Manufacturer: Standard Ignition

Brand: Standard Motor Products