Kingston Brass KB1971AX Heritage Widespread Lavatory Faucet

Introduction

Thank you for choosing the Kingston Brass KB1971AX Heritage Widespread Lavatory Faucet. This manual provides essential information for the proper installation, operation, and maintenance of your new faucet. Designed with a timeless aesthetic and constructed from durable brass, this faucet offers reliable performance and adds a touch of classic elegance to your bathroom.

Figure 1: Front view of the Kingston Brass KB1971AX Heritage Widespread Lavatory Faucet in Polished Chrome.

Product Features

• Brass Construction: Ensures durability and longevity.
• Duraseal Washerless Cartridge: Provides reliable, drip-free performance.
• Adjustable Spread: Fits 8-inch to 16-inch widespread applications.
• High Arc Spout: Offers a 7-inch spout reach and 5-7/16-inch spout clearance for ample space.
• Metal Cross Handles: Features a classic design with 1/4 turn operation.
• Polished Chrome Finish: Corrosion and rust-resistant for lasting shine.
• Water Flow Rate: Max 1.2 GPM (4.5 LPM) at 60 PSI, compliant with ASME standards and California Energy Commission Title 20.
• Standard Connection: 1/2-inch IPS connection for easy installation.
• Included Components: Faucet, mounting hardware, and pop-up drain.
• 360-Degree Swivel Spout: For enhanced flexibility and use.

Figure 2: Key features of the KB1971AX faucet, including brass construction, 1/4 turn cross handles, and 1.2 GPM flow rate.

Figure 3: The faucet features a 360-degree swivel spout for versatile use.

Setup and Installation

The Kingston Brass KB1971AX faucet is designed for widespread installation with 3 holes, accommodating an 8-inch to 16-inch adjustable spread. All necessary mounting hardware and a pop-up drain are included for a complete setup.

1. Preparation: Ensure your sink has three mounting holes with a diameter of 1.25 inches. Turn off the main water supply before beginning installation.
2. Mounting the Faucet Body: Insert the main faucet body and two handle assemblies into the designated holes on your sink or countertop. Secure them from underneath using the provided washers and nuts.
3. Connecting Water Lines: Connect the hot and cold water supply lines to the corresponding inlets on the handle assemblies. The faucet uses standard 1/2-inch IPS connections.
4. Installing the Pop-Up Drain: Assemble and install the included pop-up drain according to the instructions provided with the drain assembly. Ensure all connections are sealed properly to prevent leaks.
5. Testing: Once all connections are secure, slowly turn on the main water supply and check for any leaks. Operate the handles to ensure proper water flow and temperature control.

Figure 4: Detailed technical diagram for installation, including dimensions and component placement.

Figure 5: Components of the included pop-up drain with overflow.

Installation Video Resources

Operating Instructions

Your Kingston Brass KB1971AX faucet features two cross handles for precise control over water temperature and flow.

• Water Flow: Turn the handles a quarter turn to open or close the water flow. The Duraseal washerless cartridge ensures smooth operation.
• Temperature Control: The left handle controls hot water, and the right handle controls cold water. Adjust both handles to achieve your desired water temperature.
• Spout Swivel: The high arc spout can swivel 360 degrees, providing flexibility for various sink tasks.

Figure 6: Close-up of the hot and cold cross handles.

Maintenance

To maintain the polished chrome finish and ensure the longevity of your Kingston Brass faucet, follow these simple maintenance guidelines:

• Regular Cleaning: Clean the faucet regularly with a soft cloth and mild soap or a non-abrasive cleaner specifically designed for chrome finishes.
• Avoid Harsh Chemicals: Do not use abrasive cleaners, harsh detergents, or polishes that contain alcohol, ammonia, or bleach, as these can damage the finish.
• Dry After Use: Wipe the faucet dry after each use to prevent water spots and mineral buildup.
• Check for Leaks: Periodically inspect connections for any signs of leaks and tighten if necessary.

Troubleshooting

If you encounter any issues with your faucet, refer to the following common troubleshooting tips:

• Low Water Flow: Check if the aerator is clogged with debris. Unscrew the aerator from the spout, clean it, and reattach. Ensure water supply valves are fully open.
• Leaking from Spout: A continuous drip from the spout usually indicates a worn-out cartridge. The Duraseal washerless cartridge is designed for longevity, but replacement may be needed over time. Contact customer support for replacement parts.
• Noise During Operation: If you experience a high-pitched whine or noise at certain flow rates, check for any obstructions in the water lines or aerator. In some cases, a flow limiter inside the faucet tip can cause noise; removing it may resolve the issue, but consult a professional if unsure.
• Handles Stiff or Hard to Turn: This may indicate mineral buildup or a worn cartridge. Cleaning around the handle base or replacing the cartridge can resolve this.

For persistent issues or complex repairs, it is recommended to contact a qualified plumber or Kingston Brass customer support.

Specifications

Warranty and Support

The Kingston Brass KB1971AX Heritage Widespread Lavatory Faucet comes with a limited warranty. For specific details regarding warranty coverage, claims, or technical support, please refer to the official Kingston Brass website or contact their customer service department directly. Ensure you retain your proof of purchase for warranty validation.

Kingston Brass Customer Service: For assistance with installation, troubleshooting, or parts, please visit the Kingston Brass website or contact their support team.