1. Introduction and Overview
The Medela Symphony Breast Pump Kit is designed for use with the Medela hospital-grade Symphony breast pump. This kit provides all necessary components for single or double pumping, supporting mothers in initiating, building, and maintaining their milk supply. All components that come into contact with breast milk are made without BPA, DEHP, and natural rubber latex.
2. What's in the Box
Your Medela Symphony Breast Pump Kit includes the following components:
- (2) PersonalFit Breast Shields, 24mm: Designed for comfortable and efficient milk expression.
- (2) Breast Shield Connectors: Connect the breast shields to the bottles and tubing.
- (2) 5-Oz. / 150 mL Breast Milk Bottles with Lids: For collecting, storing, and feeding breast milk.
- (2) Tubes: Connect the breast shield connectors to the Symphony pump.
- (2) Valves: Essential for creating suction during pumping.
- (4) Membranes: Spare membranes for maintaining optimal pump performance.
- (2) Membrane Caps: Secure the membranes in place.
- (2) Protective Membranes: Additional components for pump hygiene and function.
- (1) Breastfeeding Information Guide and Instructions for Use: Comprehensive guide for product usage and breastfeeding support.
Image: All components included in the Medela Symphony Breast Pump Kit.
3. Setup Instructions
Follow these steps to assemble your Medela Symphony Breast Pump Kit:
- Ensure all components are clean and dry before assembly.
- Attach a valve to the bottom of each breast shield connector.
- Place a membrane onto each valve, ensuring it lies flat and is securely seated.
- Screw the breast shields onto the breast shield connectors.
- Attach the 5-oz. / 150 mL breast milk bottles to the assembled breast shield and connector units.
- Connect one end of each tube to the top of the breast shield connectors.
- Open the lid of the Medela Symphony breast pump and insert the other ends of the tubes into the designated ports.
- Close the pump lid securely.
Image: The Medela Symphony Breast Pump Kit box illustrating the assembled components.
Video: A demonstration of assembling the parts for the Medela Symphony double pumping kit.
4. Operating Instructions
The Medela Symphony breast pump features two research-based pumping programs to mimic infant sucking behavior:
- INITIATE Program: Designed to stimulate the breast and initiate milk production, mimicking the irregular and rapid sucking of a term-infant in the early days after birth.
- MAINTAIN Program: Mimics the term-infant's sucking pattern during established lactation to optimize milk output, utilizing 2-Phase Expression® technology (a stimulation phase followed by an expression phase).
To operate the pump:
- Plug in the Medela Symphony breast pump.
- Press the power button to turn on the pump.
- Select the desired program (INITIATE or MAINTAIN) based on your lactation stage.
- Adjust the vacuum level using the control knob to a comfortable setting that allows for efficient milk flow.
- Follow the instructions in the Breastfeeding Information Guide for recommended pumping durations and frequency.
Video: An explanation of the Medela Symphony Plus Breast Pump's programs and their benefits.
5. Cleaning and Maintenance
Proper cleaning and maintenance are crucial for hygiene and optimal performance of your breast pump kit. Disassemble all parts that come into contact with breast milk after each use.
- Washing: Wash all disassembled parts in warm, soapy water. Use a soft brush for thorough cleaning.
- Rinsing: Rinse all parts thoroughly with clean water.
- Drying: Air dry all components on a clean towel or drying rack. Avoid using cloth towels to dry, as they may leave lint.
- Sterilization: For initial use and periodic sterilization, parts can be boiled in water for 5 minutes or sterilized using a steam sterilizer or Medela Quick Clean Micro-Steam Bags.
- Important Note: Plastic bottles and component parts can become brittle when frozen and may break if dropped. Handle bottles and components with care to prevent damage from mishandling, dropping, over-tightening, or knocking over. Do not use breast milk if bottles or bottle components become damaged.
6. Troubleshooting
If you encounter any issues with your Medela Symphony Breast Pump Kit, consider the following common troubleshooting tips:
- No Suction or Weak Suction: Check that all pump parts are correctly assembled and securely connected. Ensure the membranes are flat and undamaged. Inspect the tubing for kinks, cracks, or holes.
- Low Milk Output: Verify that the breast shield size is correct for you. Ensure the vacuum level is set to a comfortable yet effective level. Consider adjusting pumping duration or frequency.
- Error Messages on Pump Display: Refer to the Breastfeeding Information Guide for specific error code meanings and recommended actions. For equipment questions or concerns, you may call your local Medela branch.
Video: A review of the Medela Symphony Plus Breast Pump, highlighting its hospital-grade features and ease of use.
7. Specifications
| Feature | Detail |
|---|---|
| Product Dimensions | 5.2 x 6.9 x 8.3 inches |
| Item Model Number | 67099NA |
| Material Type | All components that come into contact with breast milk are made without BPA, DEHP and natural rubber latex |
| Material Free | BPA Free |
| Additional Product Features | Double Pumping |
| Number Of Items | 1 (kit) |
| Style | Double, Single |
| Pump Type | Manual (referring to the kit components, not the Symphony pump itself) |
| Batteries Required | No (for the kit components) |
| Dishwasher Safe | No |
| Item Weight | 9.6 ounces |
8. Warranty and Support
This Medela Symphony Breast Pump Kit comes with a 90-Day Limited Warranty. For complete warranty details and terms, please refer to the Breastfeeding Information Guide included with your kit. For any equipment questions or concerns, please contact your local Medela branch for support.
Image: The product packaging displaying the 90-day limited warranty information.
