Timex Expedition Digital CAT 33mm Watch Instruction Manual

1. Introduction

This manual provides detailed instructions for the operation and maintenance of your Timex Expedition Digital CAT 33mm Watch, Model T47852. Please read this manual thoroughly to ensure proper use and to maximize the lifespan of your timepiece.

2. Product Overview

The Timex Expedition Digital CAT watch is designed for durability and functionality, featuring a digital display, chronograph, countdown timer, multiple alarms, and Indiglo backlight. It is water-resistant up to 100 meters.

Image 2.1: Front view of the Timex Expedition Digital CAT 33mm Watch. The watch features a black and silver-tone resin case, a green digital display showing time, day, and date, and a black nylon Fast Wrap strap. Buttons are visible on the sides for 'SET', 'MODE', 'START/SPLIT', and 'STOP/RESET', with an 'INDIGLO' button at the bottom center.

Image 2.2: The Timex Expedition Digital CAT 33mm Watch worn on a wrist, demonstrating its compact size and fit. The black Fast Wrap strap is visible, securing the watch comfortably.

3. Setup

3.1. Initial Time and Date Setting

1. Press and hold the SET button (top left) until the display flashes.
2. Press the MODE button (bottom left) to cycle through settings: seconds, hours, minutes, year, month, date.
3. Use the START/SPLIT button (top right) to increase the flashing value.
4. Use the STOP/RESET button (bottom right) to decrease the flashing value (if applicable).
5. Once all settings are adjusted, press the SET button again to exit setting mode.

3.2. 12/24-Hour Format

In time display mode, press the START/SPLIT button to toggle between 12-hour (AM/PM) and 24-hour (military) time formats.

3.3. Dual Time Zone (T2)

Your watch supports two time zones. To set the second time zone:

1. From the main time display, press the MODE button until "T2" appears on the display.
2. Press and hold the SET button until the T2 display flashes.
3. Adjust hours and minutes using the START/SPLIT and STOP/RESET buttons.
4. Press SET to confirm and exit.

4. Operating Instructions

4.1. Indiglo Night-Light

Press the INDIGLO button (center bottom) to activate the Indiglo night-light for easy viewing in low-light conditions. The light will remain on for a few seconds.

4.2. Chronograph (Stopwatch)

The 100-hour chronograph measures elapsed time, lap times, and split times.

1. Press the MODE button until "CHRONO" appears.
2. Press START/SPLIT to start the chronograph.
3. Press START/SPLIT again to record a lap/split time (the running time continues in the background).
4. Press STOP/RESET to stop the chronograph.
5. Press STOP/RESET again to reset the chronograph to zero.

4.3. Countdown Timer

The 24-hour countdown timer can be set for various durations.

1. Press the MODE button until "TIMER" appears.
2. Press and hold the SET button until the timer display flashes.
3. Adjust hours, minutes, and seconds using the START/SPLIT and STOP/RESET buttons.
4. Press SET to confirm the set time.
5. Press START/SPLIT to start the countdown.
6. An audible alarm will sound when the timer reaches zero. Press any button to silence it.

4.4. Alarms

The watch features 3 daily, weekday, or weekend alarms with a 5-minute backup snooze function.

1. Press the MODE button until "ALARM" appears. Cycle through AL1, AL2, AL3.
2. Press and hold the SET button until the alarm time flashes.
3. Adjust hours and minutes using the START/SPLIT and STOP/RESET buttons.
4. Press MODE to select alarm frequency (daily, weekday, weekend).
5. Press SET to confirm and activate the alarm. An alarm icon will appear on the display.
6. When the alarm sounds, press any button to silence it. Pressing the INDIGLO button will activate snooze.

5. Maintenance

5.1. Water Resistance

This watch is water-resistant to 100 meters (330 feet). It is suitable for snorkeling and swimming. It is not suitable for diving. Do not press any buttons while the watch is wet or submerged to prevent water ingress.

5.2. Battery Replacement

The watch uses 1 Lithium Metal battery (included). When the display dims or the Indiglo light becomes weak, it's time to replace the battery. Battery replacement should ideally be performed by a qualified watch technician to ensure water resistance is maintained.

5.3. Cleaning

Clean the watch and strap regularly with a soft, damp cloth. Avoid using harsh chemicals or abrasive materials, which can damage the watch's finish or strap.

6. Troubleshooting

• Display is blank or dim: The battery may be low or depleted. Replace the battery.
• Watch not keeping accurate time: Ensure the time and date are set correctly. If the issue persists after battery replacement, consult a service center.
• Buttons are unresponsive: Ensure the watch is not wet. If the problem continues, there might be an internal issue requiring professional service.
• Water inside the watch: Immediately take the watch to a qualified technician. Do not attempt to open it yourself, as this will void the warranty and likely cause further damage.

7. Specifications

• Model Number: T47852
• Product Dimensions: 7.5 x 1.34 x 0.43 inches
• Item Weight: 2.08 ounces
• Case Material: Resin
• Lens Material: Acrylic
• Water Resistance: 100 meters (330 feet)
• Battery: 1 Lithium Metal battery (included)
• Features: 100-hour chronograph, 24-hour countdown timer, 3 daily/weekday/weekend alarms, 24-hour military time mode, 2 time zones, Indiglo light-up dial.

8. Warranty and Support

Timex watches are typically covered by a limited warranty against manufacturing defects. For specific warranty details, registration, or to locate an authorized service center, please refer to the official Timex website or contact Timex customer support directly. Keep your proof of purchase for warranty claims.

For further assistance, visit the Timex Store on Amazon.