Introduction
Welcome to your new Spin Master 7-Eleven Slurpee Maker. This battery-operated countertop appliance allows you to create refreshing frozen drinks at home. Please read this manual carefully before first use to ensure proper operation and maintenance.
Product Overview
This image displays the Spin Master 7-Eleven Slurpee Maker in blue, filled with a red frozen drink, and dispensing into a clear cup. The machine features a clear reservoir, a blue base, and a green dispensing lever. The "SLURPEE" logo is visible on the front.
Setup
Unpacking
- Carefully remove all components from the packaging.
- Inspect for any damage or missing parts. Contact customer support if any issues are found.
Battery Installation
The Slurpee Maker requires 4 C batteries (not included).
- Locate the battery compartment on the underside of the unit.
- Open the compartment cover.
- Insert 4 C batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
- Close the battery compartment cover securely.
Initial Cleaning
Before first use, wash all removable parts (reservoir, lid, dispensing mechanism) with warm, soapy water. Rinse thoroughly and dry completely. Do not immerse the main unit in water.
Operating Instructions
Ingredients Required
- Soft drink or juice (approximately 12 oz per batch)
- Ice (crushed is recommended for best results)
- Salt (table salt)
- Warm water
Making a Slurpee
- Ensure the unit is clean and assembled correctly.
- Fill the inner chamber with crushed ice.
- Add a measured amount of table salt and warm water to the outer chamber, following the specific ratios provided in the product packaging. This mixture creates the freezing environment.
- Pour approximately 12 oz of your chosen soft drink or juice into the inner reservoir.
- Securely attach the lid. Ensure it is properly seated and sealed to allow the machine to operate effectively.
- Turn on the Slurpee Maker. The internal mechanism will begin to churn the liquid.
- Allow the machine to operate for 5 to 8 minutes, or until the desired slushy consistency is achieved.
- To dispense, place a cup under the dispensing spout and press the lever.
Note: For optimal results, ensure ice is finely crushed and the lid is securely fastened during operation.
Maintenance
Cleaning After Use
- Turn off the unit and remove batteries before cleaning.
- Disassemble all removable parts (reservoir, lid, dispensing spout).
- Wash all parts with warm, soapy water. Use a soft brush for hard-to-reach areas.
- Rinse thoroughly to remove all soap residue.
- Dry all parts completely before reassembling or storing.
- Wipe the main unit with a damp cloth. Do not immerse the main unit in water.
Storage
Store the Slurpee Maker in a clean, dry place away from direct sunlight when not in use.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Machine does not turn on | Batteries are dead or incorrectly installed. | Check battery polarity. Replace with fresh C batteries. |
| Liquid is not freezing or is too watery | Insufficient ice or salt in the outer chamber. Lid not sealed properly. | Ensure correct ice and salt ratios as per instructions. Verify the lid is securely fastened. Allow more time for freezing. |
| Machine is noisy | Normal operation sound. | Some operational noise is expected from the motor during use. |
| Lid keeps turning off / not fitting | Lid not properly aligned or secured. | Ensure the lid is correctly aligned and firmly twisted or pressed into place until it clicks. |
If problems persist, contact customer support.
Specifications
| Feature | Detail |
|---|---|
| Model Number | 6003431 |
| Brand | Spin Master |
| Power Source | Battery-Operated (4 x C batteries, not included) |
| Material | Plastic (BPA Free) |
| Color | Blue |
| Item Weight | 1.66 kg |
| UPC | 778988707524 |
Specifications are subject to change without notice.
Warranty Information
This product comes with a standard manufacturer's warranty. Please refer to the warranty card included in your product packaging for specific terms and conditions. Keep your purchase receipt as proof of purchase.
Customer Support
For assistance with your Spin Master 7-Eleven Slurpee Maker, please visit the official Spin Master website or contact their customer service department. Contact details can typically be found on the product packaging or the manufacturer's website.