Introduction
This manual provides comprehensive instructions for the safe and efficient operation, maintenance, and troubleshooting of your KRUPS FNP2 Espremio Auto Cappuccino Espresso/Cappuccino/Latte Maker. Please read this manual thoroughly before first use and retain it for future reference.
The KRUPS FNP2 Espremio is designed to prepare intense espressos, creamy cappuccinos, and flavorful lattes with ease, offering a fully automatic operation mode for convenience.
Product Overview
Image: The KRUPS FNP2 Espremio machine, a black unit featuring a water reservoir on the left, a central brewing head with a portafilter attachment, a steam wand on the right, and a drip tray with a white espresso cup placed on it. The power switch is visible on the lower left side.
Setup
- Unpacking: Carefully remove all packaging materials and ensure all components are present. Retain packaging for future transport or storage.
- Initial Cleaning: Before first use, wash the water tank, drip tray, and any removable parts with warm soapy water. Rinse thoroughly and dry. Wipe the exterior of the machine with a damp cloth.
- Water Reservoir: Fill the water reservoir with fresh, cold filtered water up to the MAX line. Do not use hot water or other liquids.
- Power Connection: Place the machine on a stable, flat, heat-resistant surface. Plug the power cord into a grounded electrical outlet.
- Priming the Pump: Follow the manufacturer's instructions for priming the pump, typically by running a few cycles of hot water through the machine without coffee to remove air from the system.
Operating Instructions
Making Espresso
- Ensure the water reservoir is filled.
- Preheat the machine by turning it on and allowing it to reach operating temperature (indicator light will signal readiness).
- Place ground espresso coffee into the portafilter. Tamp the coffee evenly.
- Attach the portafilter securely to the brewing head.
- Place an espresso cup under the spouts.
- Initiate the brewing process according to the machine's controls.
- Once the desired amount of espresso is brewed, stop the flow.
Making Cappuccino/Latte (Auto Cappuccino Feature)
The FNP2 Espremio features an auto cappuccino function for simplified milk frothing.
- Prepare your espresso shot as described above.
- Fill a container with cold milk.
- Position the steam wand into the milk.
- Activate the steam function. The auto cappuccino feature will automatically froth the milk to the desired consistency.
- Once frothed, add the milk to your espresso.
- Clean the steam wand immediately after use by wiping it with a damp cloth and purging a small amount of steam.
Maintenance
Daily Cleaning
- Empty and rinse the drip tray and coffee grounds container after each use.
- Wipe down the exterior of the machine with a soft, damp cloth.
- Clean the steam wand thoroughly after each milk frothing session.
Weekly Cleaning
- Remove and wash the water reservoir.
- Clean the brewing head and portafilter thoroughly.
Descaling
Regular descaling is crucial to maintain machine performance and extend its lifespan. The frequency depends on water hardness and usage.
- Use a descaling solution recommended by KRUPS or a suitable descaling agent.
- Follow the descaling instructions provided with the descaling solution or in the full product manual.
- Rinse the machine thoroughly with several cycles of fresh water after descaling.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Machine does not turn on. | Not plugged in; power switch off; circuit breaker tripped. | Check power cord connection; ensure power switch is on; check household circuit breaker. |
| No coffee dispenses. | Water tank empty; machine not primed; coffee too finely ground or tamped too hard; brewing head clogged. | Fill water tank; prime the pump; use coarser grind or less pressure; clean brewing head. |
| Coffee is too weak. | Insufficient coffee grounds; coffee too coarsely ground; too much water. | Increase coffee amount; use finer grind; reduce water volume. |
| No steam from wand. | Steam wand clogged; machine not at steaming temperature. | Clean steam wand hole; wait for machine to reach steaming temperature. |
Specifications
| Feature | Detail |
|---|---|
| Brand | KRUPS |
| Model Number | FNP211-42 |
| ASIN | B0006MOT4K |
| Item Weight | 6.5 pounds |
| Operation Mode | Fully Automatic |
| UPC | 010942200970 |
| Date First Available | November 15, 2004 |
Warranty and Support
This KRUPS product is covered by a limited warranty. For specific terms and conditions of the warranty, please refer to the warranty card included with your product or visit the official KRUPS website.
For technical support, spare parts, or service inquiries, please contact KRUPS customer service or visit their official website. You can find more information at the KRUPS Store on Amazon or their main corporate website.
