Introduction
Thank you for purchasing the HoMedics MS-1SM Memory Foam Massaging Slippers. These slippers are designed to provide a relaxing vibration massage for your feet, enhanced by the comfort of memory foam. Please read this instruction manual carefully before use to ensure proper operation and to maximize your experience with the product.
Important Safeguards
When using electrical products, basic precautions should always be followed. To reduce the risk of electric shock, burns, fire, or injury to persons, please observe the following:
- This product is not intended for medical use. Consult your doctor before using if you are pregnant, have a pacemaker, or have any concerns regarding your health.
- Do not use near water or in excessively damp environments.
- Keep out of reach of children.
- Do not use if the product appears damaged.
- Use this product only for its intended use as described in this manual.
- Ensure batteries are inserted with correct polarity and are of the specified type. Dispose of used batteries properly.
- Never operate this appliance if it has been dropped or damaged.
Setup
Battery Installation
The HoMedics MS-1SM Massaging Slippers require 4 AA batteries for operation, with 2 batteries for each slipper.
- Locate the battery compartment on the underside of each slipper.
- Open the battery compartment cover.
- Insert 2 fresh AA batteries into each slipper, ensuring the correct polarity (+ and -) as indicated inside the compartment.
- Securely close the battery compartment cover.
Always use new batteries of the same type for optimal performance. Do not mix old and new batteries or different types of batteries.
Operating Instructions
Using the Massaging Slippers
The HoMedics MS-1SM Massaging Slippers are designed for ease of use with a pressure-sensitive activation system.
- Ensure batteries are correctly installed in both slippers.
- Slip your feet into the slippers. The memory foam will conform to your feet for comfort.
- Apply gentle pressure by resting your feet naturally inside the slippers. The pressure-sensitive switch will activate the invigorating vibration massage.
- To stop the massage, simply lift your feet slightly or remove them from the slippers to release pressure on the switch.
The massage function is cordless and battery-operated, allowing for use anywhere in your home.
Maintenance
Cleaning
- Spot clean only. Use a soft, slightly damp cloth to wipe the surface of the slippers.
- Do not immerse the slippers in water or any other liquid.
- Do not use abrasive cleaners, brushes, or harsh chemicals, as these may damage the fabric or internal components.
Storage
- Store the slippers in a cool, dry place when not in use.
- If storing for an extended period, it is recommended to remove the batteries to prevent leakage and potential damage to the product.
Troubleshooting
- Slippers not vibrating:
- Check that batteries are correctly installed with the proper polarity.
- Replace old batteries with new AA batteries.
- Ensure your feet are fully inserted and applying sufficient pressure to activate the pressure-sensitive switch.
- Weak vibration:
- This typically indicates low battery power. Replace all batteries with new ones.
Specifications
| Model Number | MS-1SM |
| Power Source | 4 AA Batteries (2 per slipper) |
| Features | Memory Foam, Pressure-Sensitive Switch, Cordless Design |
| Approximate Dimensions (per slipper) | 13 x 5 x 4.7 inches (L x W x H) |
| Approximate Weight (pair) | 1.3 Pounds |
Warranty Information
Specific warranty details for the HoMedics MS-1SM Memory Foam Massaging Slippers are typically included with the product packaging or available on the official HoMedics website. Please refer to the documentation provided at the time of purchase for comprehensive warranty terms and conditions.
Customer Support
For further assistance, product inquiries, or support, please contact HoMedics Customer Service. Contact information can typically be found on the official HoMedics website or on the product packaging.
