Introduction
The KitchenAid Ice Cream Maker Attachment allows you to effortlessly create up to 2 quarts of fresh ice cream, gelato, or sorbet. This attachment is designed to integrate seamlessly with your KitchenAid stand mixer, transforming it into a versatile frozen dessert maker. Enjoy the convenience of homemade treats with full control over your ingredients.
Image: The KitchenAid Ice Cream Maker Attachment, ready for use.
Product Components
Your KitchenAid Ice Cream Maker Attachment includes the following components:
- Freeze Bowl: This double-walled bowl contains a freezing liquid and must be thoroughly chilled before use.
- Dasher: The dasher rotates inside the freeze bowl, mixing and scraping the ingredients to create a smooth, consistent frozen dessert.
- Drive Assembly: This component connects the dasher to the stand mixer's power hub, enabling the dasher's rotation.
Image: Individual components of the ice cream maker attachment.
Setup
- Freeze the Bowl: Place the freeze bowl in the freezer for at least 24 hours prior to use. Ensure your freezer is set to 0°F (-18°C) or colder. The bowl must be completely frozen for optimal results.
- Attach the Freeze Bowl: Place the frozen bowl onto the stand mixer's base. For bowl-lift models, ensure the bowl arms are securely seated in the bowl clamps. For tilt-head models, twist the bowl clockwise to lock it onto the clamping plate.
- Insert the Dasher: Place the dasher into the freeze bowl, ensuring it rests properly at the bottom.
- Attach the Drive Assembly: For tilt-head models, attach the drive assembly to the mixer's power hub. For bowl-lift models, the drive assembly may be integrated or attach differently based on your specific mixer model. Refer to your stand mixer's manual for detailed instructions on attaching accessories to the power hub.
- Secure the Mixer Head: For tilt-head models, lower the mixer head and lock it into place. For bowl-lift models, raise the bowl to the mixing position.
Operating Instructions
- Prepare Your Mixture: Prepare your desired ice cream, gelato, or sorbet mixture. For best results, ensure the mixture is thoroughly chilled (refrigerated for at least 8 hours or overnight) before adding it to the freeze bowl.
- Start the Mixer: Turn on your KitchenAid stand mixer to the 'STIR' speed setting.
- Pour Mixture: Slowly pour the chilled mixture into the frozen bowl while the dasher is rotating. This prevents the mixture from freezing instantly on the sides of the bowl.
- Churn: Continue churning for 20-30 minutes, or until the desired consistency is reached. The ice cream will have a soft-serve consistency directly from the machine.
- For Firmer Ice Cream: If you prefer a firmer consistency, transfer the ice cream to an airtight container and place it in the freezer for 2-4 hours.
Image: The ice cream maker attachment actively churning ingredients on a KitchenAid stand mixer.
Maintenance and Cleaning
Proper cleaning ensures the longevity and performance of your ice cream maker attachment.
- Freeze Bowl: The freeze bowl is hand wash only. Allow the bowl to reach room temperature before washing to prevent damage. Wash with warm, soapy water and rinse thoroughly. Do not place in a dishwasher. Ensure the bowl is completely dry before returning it to the freezer.
- Dasher and Drive Assembly: These components are top-rack dishwasher safe, or can be hand washed with warm, soapy water.
- Storage: Store the freeze bowl in your freezer so it's always ready for spontaneous ice cream making. Store the dasher and drive assembly in a dry place.
Troubleshooting
- Ice Cream Not Freezing:
- Ensure the freeze bowl was frozen for at least 24 hours at 0°F (-18°C) or colder.
- Verify that your ice cream mixture was thoroughly chilled before churning.
- Do not overfill the bowl; the mixture expands as it freezes.
- Dasher Not Rotating:
- Check that the dasher and drive assembly are correctly installed and engaged with the mixer's power hub.
- Ensure the mixer is set to the 'STIR' speed.
- If the mixture is too thick or has frozen to the sides, the dasher may stop. Turn off the mixer, scrape down the sides, and restart.
Specifications
| Feature | Specification |
|---|---|
| Brand | KitchenAid |
| Model Name | ICE CREAM MAKER ATTACH |
| Item Model Number | KICA0WH |
| Color | White |
| Capacity | 2 Quarts (approx. 6 Quarts bowl capacity for mixer compatibility) |
| Material | Plastic |
| Product Dimensions | 11"L x 8.5"W x 7"H |
| Item Weight | 2.72 Pounds |
| Operation Mode | Automatic (via stand mixer) |
| Product Care Instructions | Hand Wash (freeze bowl) |
Warranty and Support
For detailed warranty information and customer support, please refer to the official KitchenAid website or the user manual provided with your stand mixer. A digital version of the user manual for this attachment may also be available at https://manuals.plus/m/c82722efd947926b80f849c50f9a0a6a62b5bb490f179e43e79da35beed6e421.
KitchenAid offers various protection plans for their products. For more information on available protection plans, please visit the product page on Amazon or contact KitchenAid customer service.
