1. Introduction
The GE SH50246 Personal Security Door Stop Alarm is designed to provide an additional layer of security for any room. This device functions as both a door stop and an alarm, deterring unauthorized entry with a loud siren. Its compact and portable design makes it suitable for use in various locations, including homes, apartments, dorm rooms, hotels, and motels.
Key features include:
- Functions as a door stop to prevent door opening.
- Emits a 120dB alarm when activated by door pressure.
- Anti-skid base for stable placement on various floor types.
- Easy-access on/off switch.
- Low-battery indicator light.
- Requires one 9V battery (not included).
2. Package Contents
- GE SH50246 Personal Security Door Stop Alarm (1 unit)
3. Setup
3.1 Battery Installation
- Locate the battery compartment on the underside of the alarm unit.
- Open the battery compartment cover.
- Insert one 9V battery, ensuring correct polarity. The battery indicator light will illuminate briefly upon successful installation.
- Close the battery compartment cover securely.
Image: Underside of the alarm unit, indicating the battery compartment.
3.2 Placement
- Ensure the door you wish to secure opens inwards.
- Slide the power switch on the alarm unit to the 'On' position.
- Place the alarm unit at the base of the door, with the wedge-shaped end facing the door. The rubber base pad should be in contact with the floor.
- Adjust the position so that the door will press down on the metal plate of the alarm if it is opened. The alarm's sensitive trigger switch will activate the siren when pressure is applied.
Image: The door stop alarm positioned at the base of a door, ready for activation.
4. Operating Instructions
4.1 Activating the Alarm
To activate the alarm, slide the 'On/Off' switch located on the side of the unit to the 'On' position. A small red indicator light may illuminate to confirm it is active.
4.2 Alarm Function
When the alarm is active and placed under a door, any attempt to open the door will cause the door to press down on the metal plate of the alarm. This pressure activates a powerful 120-decibel siren, alerting occupants and potentially deterring intruders. The rubber base also provides traction, helping to prevent the door from opening further.
5. Maintenance
5.1 Battery Replacement
The alarm features a low-battery indicator light. When this light signals a low battery, replace the 9V battery by following the installation steps outlined in Section 3.1. Regular battery checks are recommended to ensure optimal performance.
6. Troubleshooting
- Alarm not sounding:
- Ensure the 'On/Off' switch is in the 'On' position.
- Check the 9V battery. Replace if the low-battery indicator is on or if the battery is old.
- Verify that the door makes firm contact with the metal plate on the alarm when opened.
- Alarm slides on floor:
- Ensure the rubber base pad is clean and free of debris.
- The alarm's grip may vary on extremely smooth or highly polished surfaces. Consider placing a non-slip mat or a small piece of tape under the alarm for added stability if needed.
- Accidental alarm activation:
- Always slide the 'On/Off' switch to the 'Off' position before handling or moving the alarm unit.
7. Specifications
- Model Number: 50246
- Power Source: 1 x 9V battery (not included)
- Alarm Volume: 120 Decibels
- Material: Plastic, Rubber (base)
- Color: White
- Product Dimensions: 9 x 5.5 x 2.25 inches
- Item Weight: 5 ounces
- Mounting Type: Door Mount (floor placement)
- Sensor Technology: Contact Sensor
8. Warranty and Support
8.1 Warranty Information
This product comes with a 1-year limited warranty. The warranty does not cover misuse of the product.
8.2 Customer Support
For further assistance or inquiries, please refer to the manufacturer's official website or contact their customer support services. Keep your purchase receipt for warranty claims.
