OM SYSTEM OLYMPUS Stylus 150 QD 35mm Camera Instruction Manual

Introduction

This manual provides detailed instructions for the proper use and care of your OM SYSTEM OLYMPUS Stylus 150 QD 35mm Camera. Designed for ease of use, this camera features a powerful 37.5-150mm 4x zoom lens, an advanced autofocus system, and a durable all-weather design. Please read this manual thoroughly to ensure optimal performance and longevity of your camera.

Front view of the OM SYSTEM OLYMPUS Stylus 150 QD 35mm Camera, showcasing its extended 37.5-150mm zoom lens and compact design.

Parts of the Camera

Familiarize yourself with the main components of your Stylus 150 QD camera:

• Lens: 37.5-150mm 4x zoom lens.
• Viewfinder: For composing your shots.
• Flash: Built-in multi-mode flash.
• Shutter Button: To capture images.
• Zoom Lever: To adjust the focal length.
• LCD Panel: Displays film counter, date, and mode settings.
• Mode/Set Buttons: For adjusting camera settings and date/time.
• Film Compartment: For loading 35mm film.
• Battery Compartment: For power source.

Top view of the camera, highlighting the zoom (W/T) controls for adjusting focal length.

Rear view of the camera, displaying the LCD panel and the MODE, QUARTZDATE, and SET buttons.

Setup

1. Battery Installation

1. Locate the battery compartment cover on the side or bottom of the camera.
2. Open the cover by sliding or pressing the latch.
3. Insert the required battery type (e.g., CR123A) according to the polarity indicators (+/-).
4. Close the battery compartment cover securely until it clicks into place.

2. Film Loading

1. Slide the camera front cover open to power on the camera.
2. Open the film compartment door by sliding the film door release latch.
3. Place a new 35mm film cartridge into the film chamber.
4. Pull the film leader across to the film take-up spool, ensuring it aligns with the red mark.
5. Close the film compartment door firmly. The camera will automatically advance the film to the first frame. The frame counter on the LCD panel will display '1'.

Interior view of the film chamber, illustrating where the film cartridge and leader are placed.

Detailed view of the film take-up spool and film pressure plate within the film chamber.

3. Setting Date/Time (Quartz Date Feature)

The Stylus 150 QD features a Quartz Date function to imprint the date or time onto your photos.

1. With the camera powered on, press the MODE button repeatedly until the desired date/time display format appears on the LCD panel (e.g., Year/Month/Day, Month/Day/Year, Day/Month/Year, Time, or no display).
2. Press the SET button to adjust the blinking digit.
3. Use the QUARTZDATE button to move to the next digit.
4. Repeat until all digits are set correctly.

Operating the Camera

1. Power On/Off

To power on the camera, slide the front lens barrier cover open. To power off, slide the cover closed. The lens will retract automatically.

2. Focusing (Autofocus System)

The camera features an 11-point, multi-wide autofocus system for precise focusing. Simply point the camera at your subject and lightly press the shutter button halfway down. The camera will focus, and a focus indicator will illuminate in the viewfinder. If the camera shake indicator appears, hold the camera more steadily or use the flash.

3. Zoom Operation

Use the zoom lever (W for Wide, T for Telephoto) located on the top of the camera to adjust the focal length of the 37.5-150mm lens. Move the lever towards 'W' to zoom out (wide-angle) and towards 'T' to zoom in (telephoto).

4. Flash Modes

The camera offers a 6-mode variable power flash system. Press the flash mode button (usually indicated by a lightning bolt icon) to cycle through available modes such as Auto Flash, Red-eye Reduction, Fill-in Flash, Flash Off, etc. Select the appropriate mode for your lighting conditions.

5. Taking Pictures

1. Frame your subject in the viewfinder.
2. Press the shutter button halfway down to activate autofocus and exposure. Wait for the focus indicator to confirm focus.
3. Press the shutter button fully down to take the picture. The film will automatically advance to the next frame.

6. Self-Timer

To use the electronic 12-second self-timer, press the self-timer button (often indicated by a clock icon). The self-timer lamp will blink, and the shutter will release after approximately 12 seconds. This allows the photographer to be included in the shot.

7. Film Rewind

Once all frames on the film roll have been exposed, the camera will automatically rewind the film back into the cartridge. The frame counter will reset. You can also manually rewind the film by pressing the manual rewind button (if available, check your camera's specific controls).

Maintenance

1. Cleaning

• Camera Body: Wipe with a soft, dry cloth. For stubborn dirt, use a slightly damp cloth and then dry thoroughly.
• Lens: Use a lens brush or blower to remove dust, then gently wipe with a clean, soft lens cloth. Avoid touching the lens surface with your fingers.
• Viewfinder: Clean with a soft, dry cloth.

Do not use organic solvents such as thinner or benzene to clean the camera.

2. Storage

When not in use for extended periods, remove the battery to prevent leakage. Store the camera in a cool, dry place, away from direct sunlight, high temperatures, and humidity. Use a desiccant if storing in humid environments.

Troubleshooting

• Camera does not power on: Check battery installation and ensure batteries are fresh.
• Film does not advance: Ensure film is loaded correctly and the film leader is properly engaged with the take-up spool.
• Flash does not fire: Check flash mode settings. Ensure the flash is not set to 'Flash Off'. Allow time for the flash to charge.
• Blurred images: Ensure the camera is held steady. The camera shake indicator will warn you if movement is detected. Use a faster shutter speed or flash in low light.
• Date/Time not imprinting: Verify the Quartz Date feature is enabled and set correctly.

Specifications

Warranty and Support

For warranty information and customer support, please refer to the documentation provided at the time of purchase or visit the official OM SYSTEM website. Keep your proof of purchase for any warranty claims.