Conair MDF3 Facial Sauna with Timer Instruction Manual

Introduction

The Conair Facial Sauna with Timer is designed to provide a soothing steam treatment for your face and sinuses. This unit helps to open pores for deep cleansing and can assist in clearing nasal and sinus passages. It features a timer for controlled sessions and an automatic shutoff for safety.

Key Features:

• Facial Sauna with timer to open pores for deep cleansing.
• Nasal cone for concentrated steaming of problem areas.
• Includes a Conair Facial Cleansing Brush with attachments for exfoliation and moisturizer application.
• Automatic shutoff and timer for customized treatment length and safety.

Important Safety Information

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Always read all instructions before using this appliance. Keep away from water. Do not use while bathing or in the shower. Unplug after use. Do not reach for an appliance that has fallen into water. Unplug immediately. Do not place or store appliance where it can fall or be pulled into a tub or sink. Do not place in or drop into water or other liquid.

Package Contents

Your Conair Facial Sauna with Timer package includes the following items:

• Conair Facial Sauna Base Unit
• Wide Facial Cone
• Narrow Sinus Cone
• Measuring Tube
• Conair Facial Cleansing Brush
• Exfoliating Brush Attachment
• Sponge Attachment

Image: The Conair Facial Sauna unit with the wide facial cone attached, alongside the facial cleansing brush and its attachments.

Image: Close-up of the Conair Facial Cleansing Brush, showing the exfoliating brush head and the sponge attachment.

Setup

1. Unpack and Clean: Carefully unpack all components of the Conair Facial Sauna System. Wipe all parts clean with a damp cloth before first use.
2. Fill Water Reservoir: Use the included measuring tube to pour tap water into the power base's reservoir. Do not overfill.
3. Attach Cone: Select either the wide facial cone or the narrow sinus cone. Twist it onto the power base and lock it into place securely.
4. Position Unit: Place the unit on a stable, flat, heat-resistant surface near an electrical outlet.
5. Plug In: Plug the appliance into a standard electrical outlet.

Operating Instructions

Using the Facial Sauna

1. Prepare Skin: Cleanse your face thoroughly before steaming. You may apply a protective cream around your eye area if desired.
2. Turn On: Switch on the unit using the power button. The "Power Ready" indicator light will illuminate.
3. Heat Up: Allow approximately 3-5 minutes for the water to heat and steam to begin generating.
4. Set Timer: Use the timer dial to select your desired steaming duration, from 3 to 15 minutes. The unit will automatically shut off after the set time or after 45 minutes for safety.
5. Steam Treatment: Position your face comfortably over the chosen cone, ensuring a gentle flow of steam. Do not press your face directly against the cone. Keep your eyes closed during the treatment.
6. Post-Steam: After steaming, rinse your face with cool water to help close pores.

Image: The Conair Facial Sauna unit in operation, showing steam rising from the wide facial cone.

Using the Facial Cleansing Brush

1. Insert Batteries: Ensure the facial cleansing brush has fresh batteries installed.
2. Attach Head: Select either the exfoliating brush or the sponge attachment and secure it onto the brush handle.
3. Exfoliation: For exfoliation, apply a small amount of your preferred cleanser to your face or directly to the brush head. Turn the brush on to the "Low" or "High" setting and gently move it in circular motions across your face.
4. Moisturizer Application: For moisturizer application, attach the sponge head. Apply moisturizer to your face or the sponge, then gently massage it into your skin using the brush on a low setting.
5. Clean Brush: After each use, remove the attachment and rinse it thoroughly with water.

Maintenance and Cleaning

Regular cleaning ensures optimal performance and longevity of your facial sauna and cleansing brush.

• Facial Sauna Unit: After each use, unplug the unit and allow it to cool completely. Empty any remaining water from the reservoir. Wipe the interior and exterior surfaces with a soft, damp cloth. Do not immerse the base unit in water.
• Cones: Remove the facial or sinus cone and wash it with warm, soapy water. Rinse thoroughly and allow to air dry.
• Cleansing Brush Attachments: Remove the brush or sponge attachment from the handle. Rinse under running water to remove any product residue. Allow to air dry completely before reattaching or storing.
• Storage: Store the unit and its accessories in a cool, dry place, away from direct sunlight.

Troubleshooting

If you encounter issues with your Conair Facial Sauna, refer to the following common solutions:

• No Steam:
  • Ensure the unit is properly plugged into a working electrical outlet.
  • Check that the water reservoir is filled to the appropriate level.
  • Allow sufficient time (3-5 minutes) for the water to heat up.
  • Verify that the cone is securely attached and locked into place.
• Unit Not Turning On:
  • Confirm the power cord is securely plugged in.
  • Check the power switch is in the "On" position.
  • If the unit has been running for an extended period, the automatic shutoff may have activated. Allow it to cool before attempting to restart.
• Cleansing Brush Not Working:
  • Check and replace batteries if necessary.
  • Ensure the brush head is securely attached.
  • Verify the power switch on the brush is set to "Low" or "High".

If problems persist, contact Conair customer service for further assistance.

Specifications

Warranty and Support

For warranty information or customer support, please refer to the documentation included with your product or visit the official Conair website. Keep your purchase receipt as proof of purchase for any warranty claims.