Homedics BMAT-1

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

HoMedics BMAT-1 Spa Bathmat Bubble Massager User Manual

Introduction

The HoMedics BMAT-1 Spa Bathmat Bubble Massager transforms any standard bathtub into a relaxing bubble spa. This comfortable, air-filled bath mat is designed to contour to your bath surface, providing a cushion of air for a soothing experience. It features a convenient dial for controlling bubble intensity, large push-buttons for heat and power functions, and an LED display to indicate active settings. Customize your massage from gentle to invigorating with variable control. The unit includes non-slip feet to prevent movement during use and rolls up for easy storage.

HoMedics BMAT-1 Spa Bathmat Bubble Massager with control unit and mat

Image: The HoMedics BMAT-1 Spa Bathmat Bubble Massager, showing the mat and the control unit.

Important Safety Instructions

When using electrical products, especially when children are present, basic safety precautions should always be followed. Read all instructions before using this appliance.

  • DANGER: To reduce the risk of electrocution, always unplug this appliance from the electrical outlet immediately after using and before cleaning.
  • Do not reach for an appliance that has fallen into water. Unplug it immediately.
  • Do not use while bathing or in a shower.
  • Do not place or store appliance where it can fall or be pulled into a tub or sink. Do not place in or drop into water or other liquid.
  • This product is equipped with an Appliance Leakage Circuit Interrupter (ALCI). This device provides protection against electrocution. If the ALCI trips, press the reset button to restore power. If the ALCI trips repeatedly, discontinue use and contact customer support.
  • Close supervision is necessary when this appliance is used by, on, or near children, invalids, or disabled persons.
  • Use this appliance only for its intended use as described in this manual. Do not use attachments not recommended by HoMedics.
  • Never operate this appliance if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Return it to a HoMedics Service Center for examination and repair.
  • Keep cord away from heated surfaces.
  • Never use while sleeping or drowsy.
  • Never drop or insert any object into any opening.
  • Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
  • Do not use outdoors.
  • Do not crush. Avoid sharp folds.

Package Contents

Please check to ensure all items are present in your package:

  • HoMedics BMAT-1 Spa Bathmat Bubble Massager Mat (47 inches x 14 inches)
  • Control Unit with variable power pump
  • Air Hose (8 inches length)
  • Power Cord with ALCI (80 inches length)

Setup Guide

1. Unpacking

Carefully remove all contents from the packaging and inspect for any damage. Retain packaging for future storage or transport.

2. Mat Placement

  1. Ensure your bathtub surface is clean and free of soap residue or oils.
  2. Place the HoMedics BMAT-1 mat into the bathtub. The mat is designed to contour to any bath surface.
  3. Press down firmly on the mat to engage the suction cups on the underside. Ensure all suction cups are securely attached to the tub surface to prevent slippage and floating.

3. Connecting the Air Hose

  1. Connect one end of the air hose to the air inlet on the bath mat.
  2. Connect the other end of the air hose to the air outlet on the control unit. Ensure both connections are secure.

4. Power Connection

  1. Place the control unit on a stable, dry surface away from the bathtub, ensuring it cannot fall into the water. The unit features non-slip feet for stability.
  2. Plug the electrical cord into a standard electrical outlet. The cord is 80 inches long.
  3. Verify the Appliance Leakage Circuit Interrupter (ALCI) on the plug is in the 'RESET' position. If it has tripped, press the 'RESET' button.

Operating Instructions

Once the unit is set up and plugged in, you can begin your spa experience.

1. Powering On/Off

  • Press the large Power push-button on the control unit to turn the bubble massager on. The LED display will illuminate.
  • Press the Power button again to turn the unit off.

2. Adjusting Bubble Intensity

  • Rotate the convenient dial on the control unit to adjust the bubble intensity.
  • Turn the dial clockwise for more invigorating bubbles and counter-clockwise for a gentler massage. The variable control allows for customized bubble action.

3. Heat Function

  • Press the large Heat push-button on the control unit to activate the warming function. The LED display will indicate when the heat function is active.
  • Press the Heat button again to turn the warming function off.

Maintenance and Care

Proper care ensures the longevity and hygiene of your HoMedics BMAT-1 Spa Bathmat Bubble Massager.

Cleaning the Bath Mat

  • Always unplug the unit from the electrical outlet before cleaning.
  • Wipe the mat and control unit with a soft, damp cloth. Do not use abrasive cleaners, brushes, gasoline, kerosene, glass/furniture polish, or paint thinner to clean the unit.
  • For thorough cleaning of the mat, it can be gently washed with mild soap and water. Ensure the mat is completely dry before storing.
  • Do not immerse the control unit in water or any other liquid.

Storage

  • After use, ensure the mat is clean and dry.
  • The mat can be rolled up for easy and compact storage.
  • Store the unit in a cool, dry place, away from direct sunlight and excessive heat.

Troubleshooting

If you encounter any issues with your HoMedics BMAT-1, refer to the following table for common problems and solutions.

ProblemPossible CauseSolution
Mat does not stick to tub or floats.Suction cups not properly engaged; tub surface is not clean or too textured; mat is not weighted down by user.Ensure tub surface is clean and wet before placing mat. Press down firmly on each suction cup. Ensure the mat is fully submerged and you are sitting on it to help keep it in place.
Weak or no bubbles.Air hose not securely connected; bubble intensity dial set too low; unit not powered on.Check that the air hose is firmly connected to both the mat and the control unit. Rotate the intensity dial clockwise to increase bubble strength. Ensure the unit is powered on.
Control unit not powering on.Power cord not plugged in; ALCI has tripped; electrical outlet issue.Ensure the power cord is securely plugged into a working electrical outlet. Check the ALCI on the plug and press the 'RESET' button if it has tripped. Try a different outlet.
Water cools down too quickly.Bubbles introduce cooler air into the bath water.Start with hotter water than usual to compensate for the cooling effect of the bubbles. The heat function helps maintain warmth.

Specifications

  • Model: BMAT-1 (Item model number: BAMT1)
  • Mat Dimensions: 47 inches (length) x 14 inches (width)
  • Hose Length: 8 inches
  • Electrical Cord Length: 80 inches
  • Safety Feature: Equipped with Appliance Leakage Circuit Interrupter (ALCI)
  • Product Dimensions (Packaged): 27.94 x 27.94 x 27.94 cm
  • Product Weight (Packaged): 4.99 kg
  • Manufacturer: HoMedics

Warranty and Customer Support

For warranty information or customer support regarding your HoMedics BMAT-1 Spa Bathmat Bubble Massager, please refer to the warranty card included with your purchase or visit the official HoMedics website. You may also contact HoMedics customer service directly for assistance with product operation, troubleshooting, or parts replacement.

Please retain your proof of purchase for any warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.