Asiatelco 2BLQ4TRH TRH Battery Powered Temperature and Humidity Sensors Owner's Manual

The TRH Bluetooth temperature and humidity sensor does not
require any installation process. Simply insert the internal Li
rechargeable battery for quick setup.

Functionality:

The TRH is powered by batteries and can be used wherever
temperature and humidity measurements are needed. Reports can be
scheduled regularly or triggered by events.

Software Configuration:

The MG14 comes with pre-configured software. The application
firmware is flexible and can be customized to be compatible with
your existing server upon special request.

Reporting:

The internal temperature and humidity sensors can be used for
testing and management reporting in any environment.

FAQ

1. Is the battery rechargeable?

Yes, the TRH sensor uses an internal Li rechargeable battery for
power.

2. Can the reports be customized?

Yes, reports can be triggered on a regular basis or in response
to specific events.

3. What is the IP rating of the device?

The TRH sensor has an IP66 rating, making it suitable for
various environmental conditions.

“`

View Fullscreen

owered
Maximize ciency. Minimize risks. Manage assets.

TRH

Perfect for any location, no installation process required. The small, battery-powered TRH Bluetooth temperature and humidity sensor is designed to be used with an internal Li rechargeable battery for quick installation.
IT’S RELIABLE
The TRH is a high-performance, IP66-rated device. It has an integrated BLE 5.3 and humidity and temperature sensors for Bluetooth wireless transmission and temperature and humidity measurement.
IT’S SIMPLE
Powered by batteries, TRH can be easily used wherever temperature and humidity measurements are required. Reports can be triggered on a regular basis or in response to events.
IT’S FUNCTIONAL The MG14 comes with pre-configured software. Its internal temperature and humidity sensor can be used for testing and management reporting in any environment.

HIGHLIGHT
BLE TEMPERATURE & HUMIDITY sensor BLE5.3 support, low power consumption Lithium-Thionyl Chloride Battery Over the air configuration and firmware
update Easy installation IP66 Rating Optional

The application firmware is flexible and can be customized to be compatible with your existing server at special request.

Asiatelco Technologies Inc. | 4611 Teller Ave, Newport Beach, CA 92660, USA sales@asiatelco.com

Specifications:
SENSOR TEMPERATURE & HUMIDITY
BATTERY INFORMATION MG14 Lithium-Thionyl Chloride Battery
1.7Ah @3.6V. It is designed for the case where more reports are need per day. Longer period of use.
ELECTRICAL Operating Current
Hibernate: < 20uA @ 3.6V Working 2mA @3.6V Typical

PHYSICAL Dimensions: 73 x 56.76 x 21.80mm Weight : < 57.5g Internal BLE Antenna
ENVIRONMENTAL IP66 Rating
Operation Temperature: -40°C to +80°C Storage Temperature: -40°C to +85°C
Blue tooth BLE 5.3
APPROVALS FCC PTCRB Carrier

Asiatelco Technologies Inc. (ATEL)
Asiatelco is the leading provider of wireless terminal products to its value customers worldwide. Its innovative products and solutions are widely used for reliable broadband access, IoT/M2M applications and voice communication with 4G LTE, 3G & 2G wireless technologies. ATEL’s sales and marketing are globally positioned. It has become globally well-known company in the wireless industry due to its excellent products, solutions and services. For more information, contact Asiatelco Technologies Inc.
Asiatelco Technologies Inc. | 4611 Teller Ave, Newport Beach, CA 92660, USA sales@asiatelco.com

FCC Regulations:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: –Reorient or relocate the receiving antenna. –Increase the separation between the equipment and receiver. –Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. –Consult the dealer or an experienced radio/ TV technician for help.
Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment.
Asiatelco Technologies Inc. | 4611 Teller Ave, Newport Beach, CA 92660, USA sales@asiatelco.com

FCC RF Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. To comply with FCC RF Exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for the transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
Asiatelco Technologies Inc. | 4611 Teller Ave, Newport Beach, CA 92660, USA sales@asiatelco.com

Documents / Resources

Asiatelco 2BLQ4TRH TRH Battery Powered Temperature and Humidity Sensors [pdf] Owner's Manual
2BLQ4TRH, 2BLQ4TRH TRH Battery Powered Temperature and Humidity Sensors, TRH Battery Powered Temperature and Humidity Sensors, Powered Temperature and Humidity Sensors, Temperature and Humidity Sensors, Humidity Sensors, Sensors

References

User Manual

2BLQ4TRH TRH Battery Powered Temperature and Humidity Sensors

Product Information

Specifications:

Product Usage Instructions

Installation: