arre-LOGO

arre TCS-07505 Contact Sensor

arre-TCS-07505-Contact-Sensor-PRODUCT Specifications:

  • Product: Contact Sensor
  • Manufacturer: Arre Home LLC
  • Model: Arre Contact Sensor
  • Compatibility: Works with home hubs with compatible read Border Routers

Product Usage Instructions

Activation and Pairing:
To activate the Contact Sensor, press the button on the front. The LED will blink 5 times to indicate pairing mode. If it blinks 2 times, it has been paired to a home hub.

Pairing with Home Hub:
Pair the Contact Sensor with your home hub. Ensure your network  has a compatible read Border Router. For more information, visit arrehome.com/borderrouter.

Battery Replacement:
When it’s time to replace the battery, turn the Contact Sensor around and remove the backplate.

Resetting the Device:
To perform a reset, push the button on the front. The greenlight will flash when the reboot is successful. Hold the button for 5 seconds to completely reset the device. Note that this will remove it from the platform and require re-pairing.

Mounting:
The backplate can be removed and mounted using screws or tape on a door/window.

FAQ:

  • Q: What should I do if the LED blinks differently than mentioned in the manual?
    A: Try resetting the device by following the reset instructions provided.
  • Q: How do I pair the Contact Sensor with a different home hub?
    A: Perform a complete reset of the device, then follow the pairing instructions with the new home hub.

Getting started

Press the button on the front of the contact sensor to activate. When the LED blinks 5 times, it means it is pairing mode. If the LED blinks 2 times, it means it has been commissioned / paired to a home hub.

arre-TCS-07505-Contact-Sensor- (1)

Pairing & activation

  • Pair the arre Contact Sensor to the home hub of your choice. Ensure your network has a compatible ˜read Border Router.
  • To learn more about ˜read Border Routers, head to http://arrehome.com/borderrouter
  • arre-TCS-07505-Contact-Sensor- (3)Turn the contact sensor on its side to reveal the pairing code. Scan or type in the manual pairing code in the platform of your choice.

arre-TCS-07505-Contact-Sensor- (3)

Battery replacement

When it is time to replace the battery, simply turn the arre Contact Sensor around and remove the backplate.

arre-TCS-07505-Contact-Sensor- (5)

Resetting the device

  • To preform a so° reset, push the button on the front of the arre Contact Sensor. ˜e green light will begin to flash when a reboot is successful.
  • Push it in and hold for 5 seconds to completely reset the device. Please note that this will remove the device from the platform you are using and will require re-pairing.

Backplate mounting

The backplate can be removed from the arre Contact Sensor and can be mounted by screws or tape to the door / window.

arre-TCS-07505-Contact-Sensor- (6) arre-TCS-07505-Contact-Sensor- (7)Warning

Magnet warning: ˜is device contains a magnet and should be kept away from people with pacemakers or other medical devices that may be affected by magnetic fields. It is important to keep the device at a safe distance from these individuals to avoid any potential harm or interference with their medical devices. Please note that failure to follow the safety instructions and warnings provided in the user manual may result in injury, damage to property, or other harmful consequences.

Legal information

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.

Documents / Resources

arre TCS-07505 Contact Sensor [pdf] User Guide
ACS-0705, 2BNH6-ACS-0705, TCS-07505 Contact Sensor, TCS-07505, Contact Sensor, Sensor
arre TCS-07505 Contact Sensor [pdf] User Guide
TCS-07505 Contact Sensor, TCS-07505, Contact Sensor, Sensor

References

Leave a comment

Your email address will not be published. Required fields are marked *