Spotlight Instructions
Magnetic Spotlight
SUITABLE FOR INDOOR USE
CLASS III VERY LOW SAFETY VOLTAGE
IN AGREEMENT TO THE NORM EN 60.598
This fixture has been tested to certify its correct operation.
This product contains a light source of energy efficiency class:
| MAGNETIC SIX XS REF. A429 | MAGNETIC TOP MICRO REF. A430 | MAGNETIC FIT 20 REF. A431 | MAGNETIC FIT 27 REF. A432 | MAGNETIC PLUS MICRO REF. A433 | MAGNETIC 10 MICRO REF.A434 | |
| 2700K | F | G | G | F | F | F |
| 3000K | F | F | G | F | F | F |
| 4000K | F | – | – | – | F | F |
CONNECTION GUIDELINES
WARNING: connect in series only in order to keep a constant current.
SAFETY INSTRUCTIONS
- Please read these instructions before commencement of installation and pass on to the user of the equipment.
- Disconnect mains voltage before starting to install.
- This luminaire isn’t suitable for looping-in connection to the mains supply.
- If in doubt consult a qualified electrician.
- This luminaire may get very warm while in use, let it cool down before touching.
- Use an appropriate driver for the power of the led and for the amount of luminaires which are going to be connected to it.
- The light source for this luminary is not replaceable; when the light source reaches the end of its useful life, the entire luminary must be substituted.
GUARANTY CERTIFICATE
Customer: ————————————
Address: —————————————
Ref./Item no: ———————————
Date of purchase: —————————-
whose quality and evironment management systems are certified by AENOR with the cedificate numbers: ER-0148/2000 and GA-2008/0547.
Distributor seal: ———————————
Calle N – Pol. Ind. EL OLIVERAL
Ribarroja del Turia 46394
VALENCIA (Spain)
www.arkoslight.com
Documents / Resources
 |
[pdf] |
