Apps YsxLite App
Specifications
- Class: B digital device
- Compliance: Part 15 of the FCC Rules
- Interference Protection: Designed for residential installation
- Radio Frequency Energy: Generates and radiates
- Distance Requirement: User and products should be at least 20cm apart
Installation and Setup:
- Ensure the device is placed in a residential setting.
- Keep the device at least 20cm away from the user.
- Connect the device to a power outlet on a different circuit from other receivers.
Interference Troubleshooting:
If you experience interference with radio or television reception, consider the following steps:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Consult the dealer or a radio/TV technician for assistance.
Important Note
Only operate the equipment as instructed to avoid harmful interference. Unauthorized modifications may void the user’s authority to use the equipment.
Installation APP
- Mobile phone, scan the following QR code for download and installation.n Name of Software: YsxLite.
Connection method 1: no network connection
- Connect the machine’s hotspot, the hotspot at the beginning of BAT. Click Connect. After the link is successful, return to APP, as shown in the following figure.
- After entering the page, follow the steps below.
- No network link has been completed; you can watch the video closely.
Note: You can’t remotely monitor the WiFi that Inks the camera within 4 meters of the camera every time you view it without a network link, With WIFI at home, you can perform the following steps to achieve remote monitoring.
Connection method 2: Internet connection
- Connect the machine’s hotspot, the hotspot at the beginning of BAT. Click Connect. After the link is successful, return to APP, as shown in the following figure.
- Find your oIFI account and enter the password correctly, then click 0K to return.
- When you return to the APP, you will see that the reminder link is successful. At this time, you can click the play button to view the screen, and the remote setting is successful.
YsxLite
After the link is displayed successfully, watch the screen
Note:
- As long as the WIFI password is correct, it can be linked.
- If it cannot be linked, first forget the router password, verify the password, and then re-enter it.
Class B device:
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used according to the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
- The distance between the surface and the products should be no less than 20cm.
- This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation
FAQs
Q: What should I do if I experience interference with radio or television reception?
A: Try reorienting the antenna, increasing increasinthe g separation between devices, or consult a professional for assistance.
Q: What is the recommended distance between the user and the product?
A: The distance should be no less than 20cm to ensure proper operation and compliance with regulations.
Documents / Resources
 | YsxLite App |
 | YsxLite App |
References
- User Manualmanual.tools
چرا تنظیمات وای فای نمیاد؟
Why are the Wi-Fi settings not appearing in the YsxLite app?
If the Wi-Fi settings or the camera's hotspot are not appearing, please follow these steps based on the YsxLite manual:
Note: If you cannot link the device, verify that your Wi-Fi password is correct. If it fails, the manual suggests forgetting the router password in your phone settings and re-entering it.
Read the full Q&A page
چرا تنظیمات وای فای نمیاد ؟
Why are the Wi-Fi settings not appearing in the YsxLite app?
If you cannot see the Wi-Fi settings in the YsxLite app, please follow these steps based on the manual's connection methods:
Note: Ensure the camera is powered on and within range of your mobile device during this setup process.
Read the full Q&A page
Non riesco a connettere l’app a una rete Wi-Fi o hotspot! Come posso fare?
How can I connect the YsxLite app to a Wi-Fi network or hotspot?
To connect the YsxLite app to a Wi-Fi network or hotspot, you can follow these two methods based on the user guide:
Method 1: Direct Connection (No Network Link)
Method 2: Internet Connection (Remote Monitoring)
Troubleshooting Tips:
Read the full Q&A page
Perché non mi fa connettere a distanza da altra casa?
Why can't I connect to the camera remotely from another location?
If you cannot connect to your camera from a different location, it is likely because the camera is currently set up using Connection Method 1 (No Network Link). In this mode, the camera acts as a local hotspot, and you can only view the video when your phone is physically near the camera and connected directly to its Wi-Fi signal.
To achieve remote monitoring from another house, you must switch to Connection Method 2 (Internet Connection):
Important Tips:
Read the full Q&A page
با یک گوشی دیگه وصل شدم خاستم به گوشی جدید وصل کنم نشد
How do I connect the YsxLite app to a new phone after it was previously connected to a different device?
To connect your camera to a new phone using the YsxLite app, you generally need to follow the setup process on the new device. Please follow these steps:
If the camera is still bound to the old phone's local configuration, ensure you have "unbound" or deleted the camera from the app on the old phone first if you are not using a shared cloud account.
Note: Ensure your WiFi password is correct, as the app will fail to link if the password is incorrect.
Read the full Q&A page