Apps Oasis Smart App

Starry Nights – Spa App Instructions
NOTE:
Turn on the spa in advance to give it time to heat up for you – Keep the Spa cover on while it is heating up – this will make it heat up quicker.
Opening App
Open the app:
Oasis Smart
Using the App
- Once the app opens, stay on the page the app opens in as shown below. No need to go into the menu or open any other options.
- Spa will always be highlighted in orange. Do not touch ‘pool’ otherwise spa will not work.
App Interface
The app interface shows the following:
- Pool Mode
- Spa Mode highlighted in orange
- Temperature display (e.g., 17.0°C)
- Appliance Status with options like Pump, Gas Heater, and Heat Pump
Appliance Status
Under Appliance Status, scroll sideways to find ‘Gas Heater’ and tap to turn On, then scroll back sideways to find ‘Filter Pump’ and tap On.
Operating the Spa
- Once the Gas Heater starts, please turn the Filter Pump Off (it will go to auto first so just tap again till it says Off). You will also see if it’s working by the status section and if the temperature is going up at the top of the screen.
- You may then use the ‘Spa Jet’ and ‘Blower’ options while in the Spa.
NOTE:
Please keep your phone in the glad bag while outside near the water.
Finishing Up
- Once finished, please turn everything Off as soon as possible and put the phone back on the charger.
- Please do not touch any other controls. The lights will operate automatically at night from 6 pm till 10 pm.
Specifications
| Feature | Description |
|---|---|
| App Name | Oasis Smart |
| Highlighted Mode | Spa Mode |
| Temperature Display | Shows current temperature (e.g., 17.0°C) |
| Appliance Status Options | Pump, Gas Heater, Heat Pump |
Starry Nights – Spa App Instructions
NOTE:
Turn on the spa in advance to give it time to heat up for you – Keep the Spa cover on while it is heating up – this will make it heat up quicker.
Opening App
Open the app:
- Once the app opens, stay on the page the app opens in as below.
No need to go into the menu or open any other option
- Spa will always be highlighted in orange. Do not touch ‘pool’ otherwise spa will not work.

- Under Appliance Status- Scroll sideways to find ‘Gas Heater’ and tap to turn On, then scroll back sideways to find ‘Filter Pump’ and tap On
- Once the Gas Heater starts, please turn the Filter Pump Off (it will go to auto first so just tap again till it says Off) You will also see if it’s working by the status section and if the temperature is going up at the top of the screen.
- You may then use the ‘Spa Jet’ and ‘Blower” options while in the Spa
NOTE:
- Please keep your phone in the glad bag while outside near the water
- Once finished, please turn everything Off as soon as possible and put the phone back on the charger.
- Please do not touch any other controls. The lights will operate automatically at night from 6 pm till10 pm.
FAQs
How do I turn on the spa?
What should I do if the spa is not heating?
Can I use the pool mode?
What should I do after using the spa?
Documents / Resources
![]() | Oasis Smart App |
References
- User Manualmanual.tools
