Starry Nights – Spa app instructions

Opening the Oasis Smart App

Open the Oasis Smart application on your device.

Once the app launches, remain on the main screen. There is no requirement to navigate into the menu or select any other options.

The spa status will consistently be highlighted in orange. Avoid touching the 'pool' setting, as this will prevent the spa from functioning correctly.

App Interface and Controls

The app interface displays controls for your spa. At the top, you will see the app name 'Oasis Smart' and the brand 'Oasis Aquatics'. The current operational mode is 'Spa', showing a temperature of 17.0°C. Indicators for 'pH High', 'ORP Low', and 'Pool/Lights White' are also present.

Under the 'Appliance Status' section, you will find the following controls:

Each of these functions can be toggled between 'On' and 'Off' states.

Operating the Spa Functions

To initiate the heating process, scroll sideways within the 'Appliance Status' section to locate 'Gas Heater' and tap to turn it On. Subsequently, scroll sideways again to find 'Filter Pump' and tap to turn it On.

After the Gas Heater begins operation, you may turn the Filter Pump Off. It might initially display 'auto'; tap it again until it shows 'Off'. You can verify its operation and monitor the temperature increase in the status section at the top of the screen.

Once the primary functions are active, you can utilize the ‘Spa Jet’ and ‘Blower’ options as desired.

NOTE: For safety and protection, please keep your phone in a waterproof bag while using the spa outdoors near the water.

Spa Shutdown Procedure

When you have finished using the spa, it is important to turn all functions ('Spa Jet', 'Blower', 'Gas Heater', 'Filter Pump') back to the 'Off' position promptly. After shutting down, place your phone back on its charger.

Automatic Lighting Schedule

Please do not interact with any other controls on the app. The spa lights are automated and will operate nightly from 6pm to 10pm.

Models: Oasis Smart App, App

PDF preview unavailable. Download the PDF instead.

starry-nights-spa-instructions macOS Version 12.7.1 (Build 21G920) Quartz PDFContext Preview

Related Documents

Preview Oasis CX Logix: Installation and Operation Manual for Pool pH Control
Comprehensive guide to installing, operating, and maintaining the Oasis CX Logix pH controller for optimal swimming pool water balance. Includes setup, troubleshooting, and safety information.