Apple USB-C 140W Power Adapter
Product Specifications
- Product Name: USB-C 140W Power Adapter
- Power Output: 140W
- Input: 28 V (DC)/5 A
Product Usage Instructions
Charging Your Device
Use the Apple 140W USB-C Power Adapter along with a USB-C cable (not included) to charge your device.
Connecting the Power Adapter
- Connect a USB-C cable to the power adapter.
- Extend the electrical prongs (if necessary).
- Plug the power adapter firmly into a power outlet.
Device Connection
- Ensure the power outlet is easily accessible for disconnecting.
- Connect the other end of the cable to your device.
INTRODUCTION
- Use the Apple 140W USB-C Power Adapter and a USB-C cable (not included) to charge your device.
- Connect a USB-C cable to the power adapter, extend the electrical prongs (if necessary), and plug the power adapter firmly into a power outlet.
- Ensure the power outlet is easily accessible for disconnecting. Connect the other end of the cable to your device.
Safety information
- WARNING: Failure to follow these safety instructions could result in fire, electric shock, or other injury or damage.
- The power adapter may become very warm during normal use. The power adapter complies with the user-accessible surface temperature limits defined by the applicable international and regional regulations and safety standards.
- However, even within these limits, sustained contact with warm surfaces for long periods may cause discomfort or injury. To reduce the possibility of overheating or heat-related injuries:
- Always allow adequate ventilation around the adapter and use care when handling it.
- Do not place the power adapter under a blanket, pillow, or your body when the adapter is connected to a power source.
- Use common sense to avoid situations where your skin is in prolonged contact with the power adapter when it’s plugged into a power source. For example, don’t sleep with a power adapter plugged into a power source.
- Take special care if you have a physical condition that affects your ability to detect heat against the body.
- Don’t use the power adapter in wet locations, such as near a sink, bathtub, or shower stall, and don’t connect or disconnect the power adapter with wet hands.
Unplug the USB-C power adapter if any of the following conditions exist:
- The USB-C cable or power cord has become frayed or damaged.
- The plug part of the adapter, the prongs, or the adapter case has become damaged.
- The adapter is exposed to rain, liquid, or excessive moisture.
- You suspect the adapter needs service or repair.
- You want to clean the adapter.
Specifications
- Input: 100-240VAC /2.0A
- (USB PD) Output: 5.2VDC/3A or 9VDC/3A or 15VDC/5A or 20.5VDC/5A or 28VDC/5A
Frequently Asked Questions
- Q: What is the power output of the USB-C 140W Power Adapter?
- A: The power output of the adapter is 140W.
- Q: What type of cable is required to use the USB-C 140W Power Adapter?
- A: You need a USB-C cable (not included) to connect the adapter to your device.
Documents / Resources
 |
Apple USB-C 140W Power Adapter [pdf] User Guide USB-C 140W Power Adapter, 140W Power Adapter, Power Adapter, Adapter |