Ansmann logo

USER MANUAL
MULTIFUNCTIONAL TOOL

Ansmann 1900-0112 Multifunctional Tool - fig 1

Ansmann 1900-0112 Multifunctional Tool - icon 1 PRODUCT DESCRIPTION

  1. Can opener
  2. Bottle opener
  3. Medium slotted screwdriver
  4. Small blade
  5. Large slotted screwdriver
  6. File
  7. Needle nose pliers
  8. Stripper
  9. Wire cutter
  10. Hook remover
  11.  Serrated blade
  12. Mini slotted screwdriver
  13. Cross head screwdriver
  14. Knife
  15. Unlock safety mechanism

SAFETY – EXPLANATION OF NOTES

Please take note of the following symbols and words used in the operating instructions, on the product and on the packaging:
Ansmann 1900-0112 Multifunctional Tool - icon 1 = Information | Useful additional information about the product
Ansmann 1900-0112 Multifunctional Tool - icon 2 = Note | The note warns you of possible damage of all kinds
Warning icon = Caution | Attention – Hazard can lead to injuries
Warning-icon.png = Warning | Attention – Danger! May result in serious injury or death
Warning-icon.png ATTENTION
Risk of injury and damage due improper use! Please read this manual carefully before first use of the multitool.

Warning-icon.png GENERAL SAFETY INSTRUCTIONS

Children are not permitted to play with the product. Children are not permitted to carry out cleaning or care.
Keep the product and the packaging away from children. This product is not a toy.
Children should be supervised in order to ensure that they do not play with the product or packaging.
Before using the tool, fully unfold the tool until it is locked Never use/open several tools at the same time Press the release (15) to fold in or release the tool lock. Be careful to not pinch your fingers Clean the tool regularly Tool is not suitable for food Never leave the tool unatten-ded, especially if there are children! The tool has sharp blades and pinch edges  Improper use of the tools, e.g. the knife, can result in serious injuries
Always transport the tool only when it is closed Check the product for damage before each use. Never use a defective product

Ansmann 1900-0112 Multifunctional Tool - icon 1 PRODUCT INFORMATION

  • Material stainless steel with black oxide coating
  • 14-in-1 tool
  • Double side safe locking mechanism
  • Brush finish handle
  • With belt bag
  • Overall lenght: 16.5 x 7.5 x 2cm
  • Closed lenght: 10.5 x 4.6 x 2 cm

Subject to technical changes. We assume no liability for printing errors.

Ansmann 1900-0112 Multifunctional Tool - icon 3Customer service:
ANSMANN AG
Industriestrasse 10
97959 Assamstadt
Germany
Support & FAQ:
E-Mail: hotline@ansmann.de
Hotline: +49 (0) 6294 / 4204 3400
MA-1900-0112/V0/07-2022

Documents / Resources

Ansmann 1900-0112 Multifunctional Tool [pdf] User Manual
1900-0112 Multifunctional Tool, 1900-0112, Multifunctional Tool, Tool

References

Leave a comment

Your email address will not be published. Required fields are marked *