anslut logo019915 LED Strip
Instruction Manual
LED STRIP
LED-LIST
anslut 019915 LED Strip - Featured Image

Danger icon

warning 4 OPERATING INSTRUCTIONS

Important! Read the user instructions carefully before use. Save them for future reference. (Translation of the original instructions)

Jula reserves the right to make changes.
For the latest version of operating instructions, see www.jula.com

anslut 019915 LED Strip - fig1 anslut 019915 LED Strip - fig2
anslut 019915 LED Strip - fig3 anslut 019915 LED Strip - fig4
anslut 019915 LED Strip - fig5 anslut 019915 LED Strip - fig6

SAFETY INSTRUCTIONS

Carefully read the instructions before use!

  • Save them for future reference.
  • Check that all connections are properly made before switching on the product.
  • If the product does not work, check that the circuit is supplied with voltage.
  • Keep children at a safe distance from the product when it is in use.
  • Exceeding the permitted maximum voltage can damage the product, or reduce its life span.
  • If the permitted maximum temperature is exceeded this can also damage the product, or reduce its life span.

SYMBOLS

Danger icon Read the instructions.
anslut 019915 LED Strip - ICON Only intended for indoor use.
Double insulation Safety class II.
CE SYMBOL Approved in accordance with the relevant directives.
Dustbin Icon ecycle discarded products in accordance with local regulations.

TECHNICAL DATA

Rated voltage 230 V ~ 50 Hz
Protection rating IP20
Operating temperature -20 to 40°C
Storage temperature -20 to 45°C
Energy class F
Life span 30000 h

019915

Output  4.5 W
No. of LEDs 60
Color temperature 2700 K
Luminous flux 450 lm
Size 2000 x 8 x 2 mm

019916

Output 16 W
No. of LEDs 180
Color temperature 2700 K
Luminous flux 1200 lm
Size 3000 x 8 x 3 mm

019917

Output  20 W
No. of LEDs 300
Color temperature 2700 K
Luminous flux 1600 lm
Size 5000 x 8 x 3 mm

INSTALLATION

FIG. 1
FIG. 2
FIG. 3
FIG. 4

USE

  1. Remove the protective paper and attach the LED strip to the required place.
  2. Plug the plug into a powerpoint.

REMOVAL

  1. Cut off in the middle of the 50 mm long soldered joint.
  2. Test the light source by connecting to 12 VDC.

FIG. 5
FIG. 6

2022-03-16
© Jula AB
JULA AB, BOX 363, SE-532 24 SKARA

Documents / Resources

anslut 019915 LED Strip [pdf] Instruction Manual
019915, 019916, 019917, LED Strip, 019915 LED Strip, Strip

References

Leave a comment

Your email address will not be published. Required fields are marked *