anslut 019906 Color Changing LED Strip Light
SAFETY INSTRUCTIONS
Carefully read the instructions before use!
- Save them for future reference.
- Check that all connections are properly made before switching on the product.
- If the product does not work, check that the circuit is supplied with voltage.
- Keep children at a safe distance from the product when it is in use.
- Exceeding the permitted maximum voltage can damage the product, or reduce its life span.
- If the permitted maximum temperature is exceeded this can also damage the product, or reduce its life span.
SYMBOLS
TECHNICAL DATA
INSTALLATION

USE
Attach with the supplied hooks and screws.
REMOVAL
- Cut off in the middle of the 50 mm long soldered joint.
- Test the light source by connecting to 12 VDC.
Documents / Resources
![]() |
anslut 019906 Color Changing LED Strip Light [pdf] Instruction Manual 019906, Color Changing LED Strip Light, LED Strip Light, Strip Light, 019906, Light |