Document

anko logoInstruction Manual
3-in-1 Streaming Solution
Keycode:43154241

anko 3 in 1 Streaming Solution - Features

Please read the instruction manual before using this device and follow all the safety instructions to avoid damage caused by improper usage.

Features

anko 3 in 1 Streaming Solution - Featuresanko 3 in 1 Streaming Solution - Features1

Accessories:

1 1.8 meter tripod stand x1
2 Microphone boom arm x1
3 8-inch ring light with USB cable x1
4 Metal tray x1
5 E holder x1
6 ball head x1
7 phone clip stick x1
8 phone clip for ring light X1
9 phone clip for E holder X2

8-inch ring light Function

anko 3 in 1 Streaming Solution - Function

The LED ring light has 3 light modes (white, warm yellow, warm white), 10 adjustable brightness

How to install

  1. Unfold the tripod on a flat platform.anko 3 in 1 Streaming Solution - How to install
  2. Fix the metal tray to your desired height and mount the screw tightly.anko 3 in 1 Streaming Solution - flat platform
  3. Unscrew the Microphone boom arm, fix it on the top part of the tripod, and screw it tightly.anko 3 in 1 Streaming Solution - mount the screw tightl
  4. Unscrew the nut, extend the boom arm to the desired length, then screw tightly.anko 3 in 1 Streaming Solution - screw tightly
  5. Insert a microphone (not included).anko 3 in 1 Streaming Solution - screw tightl1y
  6. Remove the black head of the top of the tripod, and mount the E holder on it.anko 3 in 1 Streaming Solution - Insert a microphone
  7. Mount both phone holders on the E holder.anko 3 in 1 Streaming Solution - Remove the black
  8. Screw the ball head to the E-holder with a 1/4 inch mounting screw, tightened the screw cap after connection;anko 3 in 1 Streaming Solution - holders on the E holder
  9. Screw the ring light to the tripod stand through a threaded joint with the screw cap.anko 3 in 1 Streaming Solution - Screw the ball head
  10. Screw the phone clip and stick to the lightanko 3 in 1 Streaming Solution - Screw the ring light to the tripod
  11. Unscrew the nut behind the phone clipanko 3 in 1 Streaming Solution - Screw the ring light to the tripod1
  12. Aimed the rotation ball axis into the hole.anko 3 in 1 Streaming Solution - behind the phone
  13. Push the axis into the nut and secure the nut.anko 3 in 1 Streaming Solution - rotation ball
  14. Put the phone in the phone clip in a vertical or horizontal position phone clip.anko 3 in 1 Streaming Solution - secure the
  15. Connect the USB cable to a USB adapter (Not included).

Specifications

Input: DC 5V 1.8A

Documents / Resources

anko 3 in 1 Streaming Solution [pdf] Instruction Manual
3 in 1 Streaming Solution, Streaming Solution, 43154241

Leave a comment

Your email address will not be published.