Anker Soundsync A3352
User Manual
Model No.: A3352
51005001232 V05

Safety Instructions

• Do not drop, knock, or shake the device.
• Do not disassemble. Do not attempt to open the device.
• Keep the device dry and away from all types of liquids or moisture that will corrode the electronic circuits. If the device gets wet, dry it immediately.
• Avoid extreme temperatures.
• Do not use the device outdoors during thunderstorms.
• Use original or certified cables.
• Do not use any corrosive cleaner / oil to clean.

The device should be charged at least once a month to prevent battery from experiencing excessive self-discharge phenomenon.

At a Glance

1. Power switch / Multi-function button
2. Battery indicator / Status indicator
3. 3.5mm AUX input
4. Type-C charging port
5. Microphone
6. Volume down control
7. Volume up control

Charge the Bluetooth Receiver before first use.
If Soundsync freezes, press and hold the multi-function button, insert the Type-c cable to start charging, then restart Soundsync.

Using Your Soundsync

1. Turn on / off
   

   ON	Press and hold for more than 2 seconds
   OFF	Press and hold for more than 2 seconds Note: Soundsync switches on automatically during charging

2. Button controls
   Bluetooth receiver mode

   	Steady blue (for 1 second)	Power on
   	Steady blue(for 1 second)	Power off
   	Flashing blue (Once a second)	Bluetooth pairing mode
   	Steady blue	Connected to a device / Connected to two devices simultaneously
   	Flashing blue (twice a second)	Incoming call
   	Steady blue	On call

   	Play / Pause
   	Answer incoming call / End call
   	Reject call
   	Switch audio source between Soundsync and phone
   	Press to decrease the volume
   	Previous track
   	Microphone mute
   	Press to increase the volume
   	Next track
   	Activate Bluetooth Pairing Mode

3. Music
   Bluetooth Pairing:
   

How to connect your Soundsync to two devices at the same time:

1. Press the multi-function button on Soundsync twice to enter Bluetooth pairing mode, then connect the first device to your Soundsync. Make sure the connection is successful before continuing.
2. Press the multi-function button on Soundsync twice to re-enter Bluetooth pairing mode.
3. Connect the second device to your Soundsync.
4. Once the second device is connected to Soundsync, open the Bluetooth pairing list on the first device, look for “Soundsync A3352” then select it to connect.
5. Restart Soundsync. Soundsync will automatically connect to the second device, but you must repeat step 4 to manually complete the connection with the first device.

Soundsync can only play music on one device at a time. Pause the music on the device that is currently playing before you play music on the other device.

Charge your Soundsync

Soundsync switches on automatically during charging.

	Steady red	Low battery
	Steady red	Charging (When Soundsync is off)
	Steady purple	Charging (When Soundsync is connected to a device)
	Flashing red and purple	Charging (Bluetooth pairing mode)
	Off	Fully charged

– Use the included Type-C cable to charge your Soundsync and make sure it is fully charged before first use.
– When not in use, store your Soundsync in a cool place.

Specifications

Specifications are subject to change without notice.

DC input: 5V, 1.5A
Battery capacity: 180mAh
AUX playtime: 12 hours
Charging time: 2 hours
Bluetooth version: V5.3
Support format: HFP A2DP AVRCP
Size : 50 × 29 × 10mm / 1.9 × 1.1 × 0.4 in
Weight (without packaging): 12.2 g / 0.4 oz
Operating temperature range: 14°F to 131°F / -10°C to 55°C
Range : 10 m / 33 ft
Hereby, Anker Innovations Limited declares that this device is in compliance with The Product Security and Telecommunications Infrastructure (Security Requirements for Relevant Connectable Products) Regulations 2023. For the Statement of Compliance, visit the website: https://www.anker.com/uk/psti-related.

Documents / Resources

	ANKER Soundsync A3352 Bluetooth Receiver [pdf] User Manual A3352C, 2AOKB-A3352C, 2AOKBA3352C, Soundsync A3352 Bluetooth Receiver, Soundsync A3352, Bluetooth Receiver, Receiver
	ANKER Soundsync A3352 Bluetooth Receiver [pdf] Instruction Manual A3352C, 2AOKB-A3352C, 2AOKBA3352C, Soundsync A3352 Bluetooth Receiver, Soundsync A3352, Bluetooth Receiver, Receiver

References

• User Manual