AF930 13 System Handheld Terminal With Printer
“
Specifications:
- Product Name: Wireless POS
- Product Type: AF930
Product Information:
The Wireless POS AF930 comes with a host device, Type-C charging
cable, contactless card reader, front-placed camera, indicator
light, flashlight, custom function keys, volume key, power key,
headphone hole, USB charging interface, printer, rear-placed
camera, SIM/PSAM card slot (internal), display screen, magnetic
stripe card slot, menu key, home key, IC card slot reader,
flashlight, battery storage cell, external speakers.
Product Usage Instructions:
1. Operation Mode:
IC Card Operation Mode: Insert the IC card with
the chip facing up and follow the arrow direction shown on the POS
machine.
Magnetic Card Operation Mode: Swipe the card
smoothly from top to bottom in the slot.
Flash QuickPass Card Operation Mode: Hold the
card horizontally close to the equipment according to map
position.
2. Maintenance Guide:
Safety Precautions:
- Avoid potentially explosive gases.
- Avoid using during lightning to prevent electric shock.
- Turn off immediately if abnormal odor or overheating is
detected.
Points for Attention in Daily Use:
- Avoid water or humid environments.
- Avoid extreme temperatures or exposure to fire.
- Avoid dropping, throwing, or bending the device.
- Use in a clean and dust-free environment.
FAQ:
Notices
Q: When charging, the usage time is
shortened?
A: When the POS is abnormal in use or low power
is prompted, ensure proper charging to maintain efficiency.
Guarantee:
- We offer a complete after-sales service system in accordance
with ISO9001 Quality Management System. - Maintenance fees may apply for damages caused by human factors.
Keep the warranty card safe.
Contact Information:
Manufacturer: Beijing Shenzhou Anfu Technology
Co., Ltd
FCC Caution:
For more information and support, visit www.anfupos.com or
contact 4006838160.
“`
AF930Instructions
AF930
1.Product appearance ProductaccessoriesOptional
Host
Type-C Charging cable
Inst ruct ions
Instructions
2.Product appearance
8Contactless cardreader 9Front-placed camera 11.Indicator light 10.flashlamp 12Custom functionkeys 13The volumekey
1.Powerkey
14Headphonehole
15USB charging interface
16Printer 17Rear-
placedcamer a
18SIMPSAM Cardslot(Internal)
2Display screen 3Magnetic
stripecar dslot 4Menu 5Homekey 6Returnkey
7IC cardslotreader
19Flashlight
20Battery tora gel
21 Externals peakers
3.Operation mode
.ICcardoperationmode
insertIC
card,pleaseinsertIC
cardchipUp
and
down
thearrowshownin
therightHeadDirectionInsertionPOS
Machine
.Operationmode ofmagnetic card
When swiping the card,pleasestick themagnetic strip cardinthe slot.Brush smoothly fromtop tobottom
.FlashQuickPass Card operationmode
Pleasehold the card face horizontally.Close to equipmentaccording to
mapposition
4.Maintenance guide
.Safetyprecautions
1 . Theuseofanypotentiallyexplosivegasisstrictlyprohibited. 2.Avoidinstallationoruseduringlightning, otherwisethereisariskof
LightningElectric shock; 3 . Turnoffthepowersupplyimmediatelywhenyoufindabnormalodor, overhe
at or smoke. 4.Storagetemperature: -20°Cto 45°C, Operatingtemperature: -10°Cto
45°CHumidity: 95%.
.Points for AttentioninDailyUse
1 . Donotuseinclosewaterorhumidenvironmenttoavoidliquidfalling intoPOSmachine;
2 . Donotuseinextremecoldorhotenvironments, suchascigarettes nearfireorignited.
3.Don’tfall, throworbend. 4.Usein clean and dustless environment as far
aspossibletoavoidsmallitems fallingintoPOSmachine. 5 . Donotusenearmedicalequipmentwithoutpermission. 6.Donotuseitonaircraftorinanyotherplacewhereradio
communication isprohibited. 7 . Themodelapprovalcodeofthisproductisdisplayedontheproduct
appearance nameplate.
5.Notices
Q:PScharging, theusetimeisobviouslyshortened? A:1.WhenPOSisabnormalinuseorwhenlowpowerisprompted,
please charge the equipment.Itis recommended to chargeeachtime.Atleast 3.5hours. Q:PSisunsuccessfulinreadingmagneticcardsorhasalowsuccess rateinreadingmagneticcards? A : 1 . Useoneormoredifferentmagneticstripecardsfortransaction testing to ensure that theproblemisnot caused bymagneticstripecardsArising from. 2 . Makesurethecardbrushingpostureiscorrectandthecardis smoothly brushed through the chute during the wholeprocess. 3.Youcantrydifferentspeedsofswipingcards.Q : unabletoreadICcardinformation? A : 1 . CheckwhethertheinsertiondirectionofICcardiscorrect. 2.Themetal contact surface of IC cardreaderiscontaminated withimpurities.Pleasecleanandtryagain. 3.ICcardisdamaged, anewICcardisusedtocheckwhetheritisa ICcardproblem,ifitisaICcardproblem.Pleasechangethenew card.
Guarantee
Productname:Pr WirelessPOS
oduct type:
AF930
GuaranteeItemf
1.Wehave a set of complete after-sales servicessystemin accordance withISO9001 QualityManagement System. 2.We will charge the maintenance fee if thedamagecausedby human factors.Pleasekeep this card properly for your warranty3.Please keep this cardproperly for your warranty.
Manufacturer’s contactinformation
ManufacturerBeijing ShenzhouAnfu Technology Co.,Ltd
Product certificate
Inspector Pass ManufacturerBeijing ShenzhouAnfu Technology Co.,Ltd
6.FCC Caution
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: — Reorient or relocate the receiving antenna. — Increase the separation between the equipment and receiver. — Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. — Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction FCC RF Exposure Information and Statement the SAR limit of USA (FCC) is1.6 W/kg averaged over one gram of this Device AF930 (2BLHD-AF930) has been tested against this SAR limit. SAR information on this can be viewed on-line at http://www.fcc.gov/oet/ea/ fccid/. Please use the device FCC ID number for search. This device was tested for typical operations 0mm from the body. To maintain compliance with FCC RF exposure requirements, 0mm separation distance should. maintained to the user’s bodies
4006838160 www.anfupos.com
WirelessPOSAF930
Instructions
Documents / Resources
 |
Anfu AF930 13 System Handheld Terminal With Printer [pdf] User Guide 2BLHD-AF930, 2BLHDAF930, af930, AF930 13 System Handheld Terminal With Printer, AF930, 13 System Handheld Terminal With Printer, Handheld Terminal With Printer, Terminal With Printer, Printer |