Andeman Epower-166 Multi-Function Jump Starter

Specifications:
- Model: XYZ-2000
- Dimensions: 10 x 5 x 3 inches
- Weight: 2 lbs
- Power: 120V AC
- Color: Black
PRODUCT OVERVIEW
- USB 5V/3A
- USB 5V/2A
- Charge port
- LED light switch
- Main switch
- DO anti-reverse insertion car start entrance
- LED Lighting

PACKAGE CONTENTS
Essential Version

HOW TO USE
Step 1
- Turn on the power
- Plug the jumper cables into the 12V vehicle start port

Step 2
connect the RED clamp to vehicle battery’s positive(+)terminal and BLACK clamp to negative(-)terminal

Step 3
start the vehicle 
Step 4
remove jumper clamps

DISPLAY SCREEN DESCRIPTION
- Battery power percentage
- USB input/output
- Floodlight
- Charging display

HOW TO CHARGE Epower-166
- Insert the Type-C charging cable into the Input port of the startup power supply.
- Insert the USB port of the charging cable into the adapter (Note: AC adapter is not included).
- Plug the AC adapter into a power source.

How to use the light?

FAQ TOXIC AND HAZARDOUS SUBSTANCES
| TOXIC AND HARMFUL SUBSTANCES | |||||
| Lead (Pb) | Mercury (Hg) | Cadmium (Cd) | Hexavalent Chromium (Cr (Vi)) | Polybrominated Biphenyls (PBB) |
Polybrominated Diphenyl Ethers (PBDE) |
The MCV limit specified in theStandard 2002/95/EC(RoHs).
TROUBLE SHOOTING
If the following operations can not solve your problems, please stop using the device and contact the manufacture with E-mail
| Problem | Solution |
| No response when pressing the power button | The voltage of the Epower-166 is really low and triggers the low power protection to shut down the device. Plug the wall charger into the Epower-166 to recharge it. |
| Unit fails to jump-start |
|
| USB power port fails to power on |
|
SAFETY INSTRUCTIONS
- Read the user manual carefully before using this device.
- Do not use this device as a car battery.
- Do not use this device as a toy.
- Be careful to use it when there are children around to avoid injury
- The product only works with a 12V battery.
- Use the clamps that come with the device. When the clamp or wire is damaged, stop using it immediately to avoid personal injuries caused by fire or electric shock.
- Do not connect the positive and negative clamps to each other.
- Before starting, make sure there is no rust or foreign matter on the interface. Connect the device with the clamp tightly to make sure the device starts properly.
- Remove the clamps from the car battery within 30 seconds after successfully starting the car. Otherwise, it may cause damage.
- Do not start the device more than three times in a row, and the interval between each start should be at least two minutes otherwise the product will be overheated and damaged.
- Do not use the clamps to power other devices.
- Do not place the device in an environment where the temperature exceeds 140°F
- The device shall be charged at a temperature of 32’F to 113°F
- Do not put the device in water or expose it to rain.
- Do not expose the device to high temperatures or fire.
- Do not use the device in an explosive environment with flammable liquid, gas or dust
- Make sure that someone around is available to help you when using the device
- Do not wear metal jewelry such as rings, bracelets, and necklaces while using the device
- Disconnect the jump starter and the clamp at the battery clamp plug to reduce the risk of damage to the power plug and power cord.
- Do not use damaged or modified battery packs to avoid the danger of fire, explosion, and injury
- Use the original charger or a charger with the same input terminal as the jumper starter to charge
- D o not charge this device immediately after starting the car.
- Do not start the car while charging the device.
- The battery may leak in extreme cases. Do not touch the leaked liquid directly with your hands or skin. Rinse immediately with soap and water in case of contact. If the leaked liquid comes into contact with your eyes, rinse your eyes with cold water for at least 10 minutes and seek medical advice immediately.
- At the end of the product life, the lithium battery should be disposed of in accordance with local regulations. This product is for 12-Voltage vehicle (equipment) batteries. It may be dangerous if used with other types of batteries. Read and understand the safety instructions before using the jump starter. Failure to follow the safety instructions may cause Damage to the jump starter, and may also result in electric shock, explosions, fire, property damage, and personal injury.
WARNING
This product is for 12-Volt vehicle (equipment) batteries. lt may be dangerous if used with other types of batteries. Read and understand the safety instructions before using the jump starter. Failure to follow the safety instructions may cause Damage to the jump starter, and may also result in electric shock, explosions, fire, property damage, and personal injury
FCC statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Contact Information
Thank you for your support of our original Audew products. Andeman has upgraded the original products, launched a more efficient jump starter, and enriched the product line by adding car repair and maintenance products. We hope that this brand can bring you a one-stop shopping experience forauto supplies and meet the needs of all users for auto supplies.
Contact Us:andeman@andeman.com
FAQs
How do I change the filter?
Can I use the product outdoors?
Documents / Resources
![]() | Epower-166 Multi Function Jump Starter |
References
- 25.At25.at
- andeman.comandeman.comandeman.comandeman.comandeman.comandeman.comandeman.comandeman.comandeman.comandeman.comandeman.comandeman.comandeman.comandeman.comandeman.comandeman.comandeman.comandeman.comandeman.comandeman.comandeman.comandeman.comandemanandeman.comandeman.comandeman.comandeman.comandeman.comandeman.comandeman.comandeman.comandeman.comandeman.comandeman.comandeman
- TEC - Residential and Business Internet and Voicetec.com
- User Manualmanual.tools

