ASEC163TW Q5080685 Security and Sensor Lights
“
Specifications
- Models: ASEC163TW Q5080685 & ASEC163TB Q5080695
- Light Specifications:
- 3K-1300LM
- 4K-1500LM
- 5.7K-1400LM
- Fully Adjustable Heads: Each head can be independently adjusted
for optimum light performance - Mounting Options: Wall Mount, Ceiling Mount
- Time Adjustment: Adjustable from 10 seconds to 15 minutes
Installation Guide
- Attach the base plate to the desired surface.
- Mount the sensor/lights onto the base plate as shown in Fig
1.
Testing
When testing daylight, set the TIME dial to show the – symbol
and the LUX dial to show the + sun symbol. The sensor should
respond to presence and turn on after 30 seconds. To set the sensor
for nighttime, turn the LUX dial towards the moon symbol and cover
the sensor face to simulate darkness.
Manual Override Function
- The light can stay ON longer by using the manual override
function. - To activate manual override mode:
- Under PIR Mode and the light is ON, turn the power off/on (wait
1 second between switches) twice within 3 seconds. - You should see 1 flash from the spotlights, indicating the unit
is in Manual Override Mode.
- Under PIR Mode and the light is ON, turn the power off/on (wait
- To return to PIR mode, turn the power off, wait 10 seconds, and
then turn it back on.
Care and Cleaning
To clean, wipe exterior with a damp cloth. Do not immerse in
water.
Warranty Information
Your product is warranted against faults and manufacture when
used in normal domestic use for a period of 3 years. Refer to your
proof of purchase for warranty claims.
Contact Information
New Zealand: PO Box 100-707 N.S.M.C Auckland 0745 Phone +64 (0)9
917 4000 Phone 0800 232 633 info@cdb.co.nz
Australia: PO Box 574 South Morang Victoria, 3752 Phone +61 (0)3
9336 4423 Phone 1300 465 324 info@cdbgoldair.com.au
FAQ
Q: How do I adjust the time settings on the lights?
A: The time can be adjusted from 10 seconds to 15 minutes using
the TIME dial on the sensor.
Q: How do I clean the lights?
A: Simply wipe the exterior with a damp cloth. Do not immerse
the lights in water.
“`
Installation Guide & Owner Manual
AMBIUS SECURITY AND SENSOR LIGHTS
MODELS: ASEC163TW Q5080685 & ASEC163TB Q5080695
LIGHT SPECIFICATIONS
· 16W (2x 8W) · Colour Temperature/ Lumens:
3K-1300LM / 4K -1500LM / 5.7K -1400LM
· Non Dimmable · Power/Lumen Adjustable · 90° Beam Angle · 6-8m Detection range – 150° Detection Angle · 3/ 30/ 300/ 2000 LUX Adjustment · Time Adjustment: 10 seconds to 15 minutes · Manual Override · Easy mount base plate · Material: PC · Estimated Life:LM80 35,000hrs · 220-240V 50/60Hz
FULLY ADJUSTABLE HEADS
Each Head can be independently adjusted to get the optimum light performance where you require
WALL MOUNT
CEILING MOUNT
TIME ADJUSTMENT: Adjustable 10 seconds to 15 Minutes. For convenience we have indicated approx. 5 & 9 minute positions.
LUX ADJUSTMENT: To operate in daylight, position at the mark +. To operate at Night position at the mark ( 3 lux). The other 2 positions are for low light as indicated (approx. 30 & 300 lux)
INSTALLATION
· Ensure the power is turned off. · Unscrew the retention screws on the front and remove the
base plate.
· Feed the connection through the aperture provided. · Vertical Installation: arrow on base plate points upwards. · Horizontal Installation: arrow will point opposite way to
sensor/lights.
· Fix the base plate to the wall using the screw holes. · Connect power source to the “N” (blue wire) “L” (brown wire) according to the wiring diagram. · Choose your desired colour temperature by moving switch to either 3K/4K/5.5K · Now the light simply plugs back into base by lining up arrow and 3-Pins with terminal. See Fig 1. · Turn on the power.
Fig 1.
TEST When testing daylight, set the TIME dial to show the “-” symbol and the LUX dial to show the “+” sun symbol. After 30 seconds the sensor should respond to presence and turn on and then off after the set 10 seconds. To set the sensor for the nighttime during the day turn the LUX dial towards the moon “-” symbol and cover the sensor face to simulate darkness.
MANUAL OVERRIDE FUNCTION 1. The light can stay ON for longer time periods by using the manual override function. 2. Under PIR Mode and the light is ON, simply turn the power off/on (**IMPORTANT: wait 1 second between
switching from off to on to ensure sensor shuts off completely) and then off/on again waiting 1 second to allow sensor to shut off, this whole process must be done within 3 seconds. After both off/on switches you should see 1 flash from the spotlights, this indicates the unit is now in Manual Override Mode and the light will stay ON. 3. To put the sensor back in PIR mode simply turn the power off, wait 10 seconds, and then turn power on and the light automatically goes back to PIR mode.
CARE AND CLEANING To clean wipe exterior with a damp cloth. Do not immerse in water.
PROOF OF PURCHASE Please retain your purchase receipt for all warranty claims
WARRANTY Your product is warranted against faults and manufacture when used in normal domestic use for a period of 3 years.
We undertake to replace this product at no charge if found to be defective due to a manufacturing fault during the warranty period. This warranty excludes damage caused by misuse, neglect, shipping accident, incorrect installation, or work carried out by anyone other than a qualified electrical service technician.
If your product fails to operate satisfactorily, please return it to the retailer from whom it was purchased to obtain a repair or replacement product. You will need to produce satisfactory evidence of date of purchase. If the product is to be replaced (cannot be repaired) then that replacement will be of the same or similar product or accessory excluding packaging, instruction card etc.
In New Zealand product is covered by the Consumers Guarantee Act (1993). In accordance with the act consumers are advised that: The manufacturer does not undertake that repair facilities and parts are necessarily available for this product.
New Zealand PO Box 100-707 N.S.M.C Auckland 0745
Phone +64 (0)9 917 4000 Phone 0800 232 633 info@cdb.co.nz
Australia PO Box 574 South Morang Victoria, 3752
Phone +61 (0)3 9336 4423 Phone 1300 465 324
info@cdbgoldair.com.au
Documents / Resources
 |
AMBIUS ASEC163TW Q5080685 Security and Sensor Lights [pdf] Owner's Manual ASEC163TW Q5080685 Security and Sensor Lights, ASEC163TW Q5080685, Security and Sensor Lights, Sensor Lights, Lights |