SK020 Bluetooth Computer Soundbar
User Manual
SK020 Bluetooth Computer Soundbar
Model: SK020
PC Sound Bar
User Guide
PACKAGE CONTENTS
- Sound Bar (Model SK020)
- User Guide
- 1ype-C Charging Cable
- 3.5mm Audio Cable
PRODUCT DIAGRAM
1 Power On/ Off 2 Play/ Pause 3 Previous Track/ Volumn 4 Mode Setting 5 Next Track / Volumn + 6 Clock Setting |
7 Light Setting 8 USB Port 9 TF Port 10 3 5mm Audio Port 11 Charging Indicator 12 DV SV Power Port |
LED Display
A Clock Display D USB Mode G Clock PM |
B Bluetooth Mode E IF Mode H Play/ Pause |
C AUX Mode F Clock AM |
Basic parameters
Bluetooth Version | 53 | SNR | 27008 |
Bluetooth Range | 210m | Distortion | <1% |
Power Output | 6W*2+3W*2 | Separation | 60dB |
Power Input | DC SVlA / 5V2A | Audio Input | BT/AUX/USB/TF |
Frequency Range | 80H2-20KHz | USB/TE | Support 32GB max |
IMPORTANT SAFETY INSTRUCTIONS
Please read the instructions thoroughly before using this product and retain it for future reference.
Warning
- Never place the Sound Bar near the heat sources.
- Only use this Sound Bar indoors.
- Never place this Sound Bar on other electrical equipment.
- Keep the product clean and dry. Do not clean the product with detergent containing alcohol, ammonia, benzene or abrasives.
Caution
- Do not expose this product to high temperatures.
- Store this product in a dry place. Keep it away from humidity and corrosives.
- Do not immerse the Sound Bar into water or expose them to humidity for a long time.
- Avoid dropping.
- Close attention is needed when using near children.
- Unauthorized disassembly of any parts of this product is forbidden.
- Always ask a professional technician or authorized personnel for repair.
Function | Button | Operation |
Power On / Off | ![]() |
Press the power button for 3s |
Display On / Off | ![]() |
Press the power button |
Mode Change | ![]() |
Press the mode button |
Disconnect Bluetooth | ![]() |
Press the mode button for 3s |
Clear Bluetooth Pairing | ![]() |
Press the mode button for 8s |
Play/ Pause | ![]() |
Press the play/ pause button |
Volumn + | ![]() |
Press the Volumn+ button |
Volumn | ![]() |
Press the Volumn- button |
Next Track | ![]() |
Press the next track button for 3s (under Bluetooth/USB/TF mode) |
Previous Track | ![]() |
Press the previous track button for 3s (under Bluetooth/USB/TF mode) |
Light On/ Off | ![]() |
Press the light button for 3s |
Set the Light Mode | ![]() |
Press the light button to sequentially switch among the four light modes |
Enter Clock Setting/ Save Clock Settings and Exit | ![]() |
Press the clock setting button for 3s |
Adjust the Clock and Minutes after entering the clock setting | ![]() |
Press the clock setting button to toggle between clock and minutes Press the volume+ and volume-to add and subtract clock and minutes |
Reset the Sound bar | ![]() |
Press the volume+ and volume – at the same time for 3s |
Reboots the Sound Bar | ![]() |
Press the power button until the sound bar shut down and reboots |
CLEANING AND MAINTENANCE
- Clean the Sound Bar on a regular basis.
- Use dry and soft cotton cloth to wipe the unit.
- Keep away from sharp objects to avoid scratches.
- Put the unit in a dry and shady place if it is to be idle for a long time.
- Do not clean the product with detergent or chemicals.
Note:
- Do not insert anything into the product.
WARRANTY AND SERVICE
If any problems occur, please contact the Blueweed Customer Care Centre via E-mail: support@bluedee.com
Extend 2-year warranty: www.warranty-hub.com
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions; (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device and its antenna(s) must not be co located or operation in conjunction with any other antenna or transmitter.
Radiation Exposure Statement
To maintain compliance with FCC’ s RF Exposure guidelines, This equipment should be installed and operated with minimum distance of 20cm from your body.
Manufacturer:
Shenzhen Hanke Technology Co. Ltd
Address:
Peiping SKY311, No.3 Hebei Industrial Zone, Zhong Xing Road, Malatang Community,
Bantian Street, Long9gang District, Shenzhen, Guangdong, China, 518000
E-mail: support@bluedee.com
Documents / Resources
![]() |
amazon basics SK020 Bluetooth Computer Soundbar [pdf] User Manual SK020 Bluetooth Computer Soundbar, SK020, Bluetooth Computer Soundbar, Computer Soundbar, Soundbar |