More than just power. TM
NetWayXT Series
Repeater Modules
Models Include:
NetWayXT
– IEEE 802.3af (15W) Compliant Repeater Module
NetWayXTX
– IEEE 802.3af (15W) and IEEE 802.3at (30W) Compliant Repeater Module NetWayXTG (UL evaluation pending)
– 1Gb IEEE 802.3af (15W) and IEEE 802.3at (30W) Compliant Repeater Module
Installation Guide
Rev. 042409
Installing Company: _______________ Service Rep. Name: ___________
Address: ____________________ Phone #: __________________
Overview:
Altronix NetWayXT, NetWayXTX and NetWayXTG repeater modules interface with NetWay midspans/endspans to extend data (video) for an additional 100m. A maximum range of 600m for NetWayXT and even longer for NetWayXTX and NetWayXTG is possible using multiple repeaters, based on camera/device port power requirement.
Features:
Agency Listings:
- UL 60950-1 Information Technology Equipment (except NetWayXTG).
- CE European Conformity.
Additional Features:
- Repeater module extends range 100m each.
- Port status LEDs.
Additional Features (cont’d):
- Compact insulated housing.
- Plug-and-play installation.
- Auto detection and protection of legacy non-PoE cameras.
- No external power is required.
Installation Instructions:
NetWayXT/NetWayXTX/NetWayXTG is not intended to be connected to outside plant leads.
- Mount NetWayXT/NetWayXTX/NetWayXTG in the desired location utilizing the mounting hole (Fig. 1a, pg. 2, Fig. 2a, pg. 3).
Use a proper fastener and/or wall anchor when securing NetWayXT/NetWayXTX/NetWayXTG to the wall. - Connect structured cable from port marked [OUT] on NetWay1, NetWay8, NetWay8M, NetWay16, or NetWay16M to port marked [IN] on the NetWayXT/NetWayXTX/NetWayXTG (Fig. 1b, pg. 2, Fig. 2b, pg. 3).
- Connect structured cable from port marked [OUT] on NetWayXT/NetWayXTX/NetWayXTG to the PoE camera/ device or next NetWayXT/NetWayXTX repeater (Fig. 1b, pg. 2, Fig. 2b, pg. 3, Figs. 3-4, pg. 3 ).
- Port status LEDs will illuminate on NetWayXT indicating the port is operational (Fig. 1b, pg. 2, refer to Port LED definitions on pgs. 2-3).
Port LED Definitions for NetWayXT Repeater:
| Status | Green LED | Yellow LED |
| OFF | Indicates it is connected as 10Base-T or no link. | Indicates no link |
| ON | Indicates it is connected as 100Base-TX. | Indicates a link |
| Blinking | Indicates activity | – |
NetWayXT
Port LED Definitions for NetWayXTX Repeater:
| Status | PoE/PoE+ Output LED |
PoE/PoE+ Input LED |
Green Input Port LED |
Yellow Input Port LED |
Green Output Port LED |
Yellow Output Port LED |
| OFF | No PoE/PoE+ Output |
No PoE/ PoE+ Input |
No data input | Indicates no link |
Indicates no link |
No data output |
| ON | Normal PoE/ PoE+ Output |
PoE/PoE+ Input |
Indicates 10/100 link |
Indicates 10/100 link |
||
| Blinking | Indicates 10/100 activity |
Indicates 10/100 activity |
NetWayXTG
Port LED Definitions for NetWayXTG Repeater:
| Status | PoE/PoE+ Output LED | Green LED | Yellow LED |
| OFF | No PoE/PoE+ Output | Indicates no link. | Indicates no link |
| ON | Normal PoE/PoE+ Output | Indicates 1G link | Indicates 10/100 link |
| Blinking | – | Indicates 1G activity | Indicates 10/100 activity |
NetWayXT / NetWayXTX / NetWayXTG Installation Guide
Typical Applications: Fig. 4 – NetWayXT connected to NetWay1 Single Port Midspan Injector.
Fig. 5 – NetWayXTX/NetWayXTG connected to NetWay1X Single Port Midspan Injector.
Fig. 6 – NetWayXT/NetWayXTX/NetWayXTG connected to NetWay Midspan.
Fig. 7 – Connecting several NetWayXT/NetWayXTX/NetWayXTG on a single port.
Altronix is not responsible for any typographical errors.
140 58th Street, Brooklyn, New York 11220 USA | phone: 718-567-8181 | fax: 718-567-9056
website: www.altronix.com | e-mail: info@altronix.com | Lifetime Warranty
IINetWayXT/XTX/XTG I13UNetWayXT / NetWayXTX / NetWayXTG Installation Guide
Documents / Resources
 |
Altronix NetWayXT Series Repeater Modules [pdf] Installation Guide NetWayXT Series Repeater Modules, NetWayXT Series, Repeater Modules |
