newline Z Series WiFi Modules
How to Install Wi-Fi Modules
Perform the following steps to install the Wi-Fi Module on the Z Series
- Unscrew the 2 screws on the Wi-Fi Module port and remove the shielding cover.
- Insert the Wi-Fi Module into the port on the rear of the panel until firmly seated, using the 2 screws to secure it.
Caution
The Wi-Fi Module does not support hot plugging. Therefore, you must insert or remove the Wi-Fi Module when the display is powered off. Otherwise, the displays or Wi-Fi Module may be damaged.
Contact Us
Still, need additional assistance? Contact our Technical Support Team at 833-469-9520, ext 5000 or support@newline-interactive.com.
Documents / Resources
 | newline Z Series WiFi Modules [pdf] Installation Guide Z Series, WiFi Modules, Z Series WiFi Modules |
