Altimus 12V DC Timer with Changeover Switch
Model specification
Three functions combine into a timer
- Buttons
- Manual: Manual
: Timer
: Clock- D+: Week
- H+: Hour
- M+: Minute
- St: Second
Techanical Data
- Power Supply: 200-250Vac, 50/60Hz
- (Customised Voltage: 6VDC,12VDC,24VDC,110VAC)
- Capacity: Resistive 16AMP, Inductive 8AMP
- Power cousuption: <5VA
- Timing Range: Isecond-168hrs
- Black-out: 90 days
- Programs: 8ON/OFF per day
- Average error: < ‡2 sec/day
- Temperature range: 10-50 C
- Humidity: <95%
- Installation: pannel/wall mounted
- Dimensions: 60×60×30mm
- Net. Weight: 0.12kg
Wiring for 3 models
Setting method
- Adjustment of the present time
Hold St and Mt for over 3 seconds, it can shift from 24hr to 12hr forms.
Timer setting
Cancel or recall the programs you set by pressing MANUAL buttons in programming status.
Dimensions
Installation combination diagram
Manufactured by SINOTIMER
Documents / Resources
 |
Altimus 12V DC Timer with Changeover Switch [pdf] Owner's Manual 12V DC Timer with Changeover Switch, 12V, DC Timer with Changeover Switch, Timer with Changeover Switch, with Changeover Switch, Changeover Switch, Switch |
