AKKO 3084 B Plus Multi Modes Mechanical Keyboard User Manual

Technical Specifications

Dimensions
Approximately 316*126*28mm
Weight 
Approximately 0.85kg
Country of Origin 
China
Type
Mechanical Keyboard
Keycap
PBT Material
Connection 
Bluetooth/USB/2.4Ghz

HotKeys

Fn+F6

Fn+	F1			File Explorer
	F2			E-mail
	F3	=		Windows Search
	F4			Browser Homepage
	F5			Media
			Pause /Playback
	F7			Previous Song
	F8	=		Next Song
	I			Insert
	C			Calculator
Fn+	M		Mute
	<		Decrease Volume
	>     =		Increase Volume
	w		Swap W A S D with ↑↓ ← →

System Commands(Windows)

Lock Windows Key: Press Fn and left Win key
Restore Factory Settings: Hold down Fn and press ～ key for 5S
Revert Ctrl into Menu (APP) key: Hold down Fn and press right Ctrl for 3S
Enter Windows system: Hold down Fn and press Q key for 3S
Enter Mac system: Hold down Fn and press O key for 3S

System Commands(Mac)

F1		Decrease display brightness		F7		Skip back (Audio)		F11		Volume down
F2		Increases display brightness		F8		Pause/Play (Audio)		F12		Volume up
F3		Open mission control		F9		Skip forward (Audio)		Left Win		Option
F4		Activate Siri		F10		Mute		Left Alt		Command

Backlight Settings

Fn+“↑”

Fn+	Del		Effect 1、Effect 2、Effect 3、Effect 4
	Home		Effect 5 Effect 6、Effect 7、Effect 7、      、      、
			、	、	、
	PgDn	=	Effect 13 Effect 14 Effect 15 Effect 16、      、      、
	End		Effect 17 Effect 17 Effect 19 Effect 20
	L		Light On / Off
	\		In all lighting effects with RGB color mode, this shortcut allows you to set the backlight color to 7 single color with RGB loop effect.
		Bright
	“↓”		Dim
	“←”	=	Set animation direction to left
	“→”		Set animation direction to right
	“-”		Slower Animation
	“+”		Faster Animation

Bluetooth Feature Overview

Fn+	E		Bluetooth device 1			Short press to connect with slow flashing blue LED;Press and hold to pair device with fast flashing blue LED.
	R		Bluetooth device 2
	T	=	Bluetooth device 3
						Short press to connect with slow flashing green LED;The lighting effect will be restored when pairing succeeds.
	Y		2.4G wireless device
	U		Wired mode

Bluetooth Setup Instruction 1

Switch to Bluetooth mode

1. When the keyboard remains unplugged, users can push the switch on the back to the left/right to enter Windows/Mac mode correspondingly. Then long press and hold Fn + E / R / T to start pairing with Bluetooth devices. The keyboard will enter Bluetooth pairing mode when the blue LEDs under E / R / T keys flash quickly.
2. When the Keyboard is plugged into the computer through USB interface, it will enter Bluetooth mode automatically without having to push the switch on the back. Users can directly long press and hold Fn + E / R / T to enable Bluetooth pairing. The keyboard will enter Bluetooth pairing mode when the blue LEDs under E / R / T keys flash quickly.

Set the Bluetooth profile
To help user recognize individual Bluetooth device, the keyboard is equipped with both Bluetooth 5.0 and 3.0 frameworks. The device name under the Bluetooth 5.0 framework is Akko 3084BT-1 / Akko 3084BT-2 / Akko 3084BT-3 while the device name under Bluetooth 3.0 is AKK0 3084 BT3.0. Once the devices are paired through Fn + E/R/T, the system will by default memorize the last connected device before you turn off the Bluetooth mode.

Bluetooth Setup Instruction 2

Bluetooth Pairing
The keyboard can be paired with PC, Pad, smartphone and other devices with Bluetooth turned on. When you first try to search Bluetooth devices, two groups of device names shall appear with Akko 3084 BT3.0 (Bluetooth 3.0) and Akko 3084-1 (Bluetooth 5.0). Select a Bluetooth group based on your preferences (Note: some devices can only search for the Bluetooth 5.0 group).

Switch the Bluetooth device
After 4 Bluetooth devices have been paired with the keyboard, press Fn+E / Fn+R / Fn+T / Fn+Y for at least 3 seconds to quickly switch between them.

Shut off the keyboard
Turn the power off on the keyboard back panel while unused for power saving; If the keyboard remains unused for over 10 mins, it would go to sleep mode and you can activate it by pressing any key. Note: The battery saver mode for Windows system would affect/delay the sleep activation time of the keyboard.

Reset the keyboard
If you forgot the specific paired front-end device or if there remains disorder in Bluetooth connection and communication, you’ll need to clear the computer’s Bluetooth cache by removing the 3084 keyboard from the list of connected device.

Key/Lighting Effects Customization Instruction

1. The key/lighting effects customization must be completed in wired mode with Akko driver.
2. In wired mode, the lighting effects can also achieve music rhythm effects with Akko driver.
3. Please download the Akko Cloud driver on our website.
4. Users can download the driver via en.akkogear.com

Akko Warranty and Service Statement

1. Akko provides 1-yr warranty for customers in mainland China. For other regions, please contact your seller (Akko distributor) for specific warranty policy.
2. If the warranty window expires, customers need to pay for repairs. Akko will also provide instructions if users prefer to repair the keyboard by themselves. However, users shall take full responsibility for any loss happenedduring self-repair.
3. Dissembling the keyboard without manufacturer/seller’s instruction will immediately void the warranty.
4. The return and warranty policy may vary in different platforms and are subject to the specific distributor at the time of purchase.

Documents / Resources

AKKO 3084 B Plus Multi Modes Mechanical Keyboard [pdf] User Manual 3084B, 3084B Windows, 3084B Mac, 3084BT-1, 3084BT-2, 3084BT-3.0, 3084 B Plus Multi Modes Mechanical Keyboard, 3084 B Plus Multi Modes Keyboard, Keyboard, 3084 B Keyboard, Multi Modes Keyboard, Mechanical Keyboard

References

• User Manual