Akko 3084 Plus Multi-modes Keyboard

Table of Contents

• 3084B Technical Specifications
• 3084B HotKeys
• 3084B System Commands (Windows)
• 3084B System Commands (Mac)
• 3084B Backlight Settings
• 3084B Bluetooth Feature Overview
• 3084B Bluetooth Setup Instruction 1
• 3084B Bluetooth Setup Instruction 2
• Key/Lighting Effects Customization Instruction
• Akko Warranty and Service Statement

3084B Technical Specifications

3084B HotKeys

The following table outlines the hotkey functions:

3084B System Commands (Windows)

Keyboard shortcuts for Windows system operations:

3084B System Commands (Mac)

Keyboard shortcuts for Mac system operations:

3084B Backlight Settings

Control and customize keyboard backlight effects:

Note: In RGB color mode, this shortcut allows setting backlight color to 7 single colors with RGB loop effect.

3084B Bluetooth Feature Overview

Connect and manage Bluetooth devices:

3084B Bluetooth Setup Instruction 1

1. Switch to Bluetooth mode

1. When the keyboard remains unplugged, push the switch on the back to the left/right to enter Windows/Mac mode respectively. Long press and hold Fn + E / R / T to start pairing with Bluetooth devices. The keyboard will enter Bluetooth pairing mode when the blue LEDs under E / R / T keys flash quickly.
2. When the keyboard is plugged into the computer through USB interface, it will enter Bluetooth mode automatically. Long press and hold Fn + E / R / T to enable Bluetooth pairing. The keyboard will enter Bluetooth pairing mode when the blue LEDs under E / R / T keys flash quickly.

2. Set the Bluetooth profile

The keyboard supports Bluetooth 5.0 and 3.0 frameworks. Bluetooth 5.0 device names are Akko 3084BT-1 / Akko 3084BT-2 / Akko 3084BT-3. Bluetooth 3.0 device name is AKKO 3084 BT3.0. The system will memorize the last connected device.

3084B Bluetooth Setup Instruction 2

3. Bluetooth Pairing

Pair the keyboard with PC, Pad, smartphone, or other Bluetooth-enabled devices. Two groups of device names will appear: Akko 3084 BT3.0 (Bluetooth 3.0) and Akko 3084-1 (Bluetooth 5.0). Select based on your preferences. Note: Some devices may only detect the Bluetooth 5.0 group.

4. Switch the Bluetooth device

After pairing up to 4 Bluetooth devices, press Fn + E / Fn + R / Fn + T / Fn + Y for at least 3 seconds to switch between them.

5. Shut off the keyboard

Turn off the power on the keyboard back panel when not in use to save power. The keyboard enters sleep mode after 15 minutes of inactivity and can be woken by pressing any key. Note: Windows power saving mode may affect sleep activation time.

6. Reset the keyboard

If you forget the paired device or experience Bluetooth connection issues, remove the 3084 keyboard from your computer's Bluetooth device list to clear the cache and re-pair.

Key/Lighting Effects Customization Instruction

1. Key and lighting effects customization requires the Akko driver in wired mode.
2. In wired mode, the Akko driver enables music rhythm effects for lighting.
3. Download the Akko Cloud driver from the official website.
4. Driver download URL: en.akkogear.com

Akko Warranty and Service Statement

1. Akko provides a 1-year warranty for customers in mainland China. For other regions, contact your seller (Akko distributor) for specific warranty policy.
2. If the warranty expires, repairs will incur a fee based on market average prices. Akko may provide repair instructions for self-repair, but users assume full responsibility for any damage during self-repair.
3. Disassembling the keyboard without manufacturer/seller instructions voids the warranty.
4. Return and warranty policies may vary by platform and distributor.

Precautions: Man-made damage includes, but is not limited to, immersion, dropping, or excessive force on wires.