AJCLOUD Security Camera App Installation Guide

AJCLOUD Security Camera App

Overview

Install the AJCloud app, register your account, then add the device and connect it to your Wi‑Fi (use 2.4G on dual-band routers). After pairing succeeds, you can use cloud storage, motion detection, two-way voice, 24/7 monitoring, TF card local storage, and device sharing.

Key Specifications

Quick Installation & Use

1. Ensure the wireless router is in normal use.
2. Connect your mobile phone to Wi‑Fi; for dual-band routers, connect to the 2.4G Wi‑Fi network.
3. Download and install the AJCloud app from the App Store or Google Play, then open the app.
4. Register an account using your email address.
5. In the app, tap Add Device (or +), select the device type, and choose the setup mode (Camera setup & Wi‑Fi setup).
6. Connect to the network (Decoded code: s=9999), then wait for the connection to complete.
7. When Pairing succeeded appears, configuration is complete.
8. If the connection fails, follow the app instructions to reconfigure the network.

Preparations

Check whether the wireless router is in normal use, and then connect the mobile phone to the WiFi network. If it is a dual-band router, please connect to a 2.4G WiFi network.Download and Install

1. Go to the App Store or Google Play to search and download “AJCloud” APP to your supported devices. Or please scan below QR code to download”AJCloud” to your Android or Apple device.
2. Open the “AJCloud” APP and register an account using your email. Tips: Your password must be 8-16 characters, and at least contain the following three categories: numbers, uppercase letters, lowercase letters, special characters.

Wireless access method

The device is placed from a position close to the router.

1. Click “Add Device” or “+”
2. Select device type
3. Select setup mode
4. Camera setup
5. Wi-Fi setup
6. Connect to network
7. Wait for connection
8. Pair succeeded

If the wireless network connection fails, please follow the APP guide to re-configure the network.

Advanced Features

Precautions

• 1. The use of unauthorized or incompatible power supplies may cause fire, explosion, or other hazards.
• 2. This product and its accessories include small parts. Keep them out of the reach of children to prevent accidental damage or swallowing, which can cause suffocation and other hazards.
• 3. This product is not a toy; children should only use it under adult supervision.
• 4. Please operate the product within the temperature range of -10°C to 50°C. Extreme ambient temperatures may cause product failure.
• 5. Do not use this product outdoors during thunderstorms to avoid malfunctions or electric shock.
• 6. Keep the device away from appliances that generate strong magnetic or electric fields, such as microwave ovens and refrigerators.

Note: Product specifications and manual information are for reference only. Modifications may be made without prior notice. Available functions may vary depending on the specific product model. This manual is intended for general guidance purposes only.

FCC Warning

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

RF Exposure Statement

To maintain compliance with FCC’s RF Exposure guidelines, this equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter.

Troubleshooting

You can self-diagnose based on indicator light behavior (if available). For models without indicator lights, follow the audio prompts in the app for configuration.

• Solid Yellow (Red): Camera is powered on.
• Yellow (Red) and Green (Blue) flashing alternately: Waiting to connect.
• Flashing Green (Blue): Camera is connecting to Wi‑Fi.
• Solid Green (Blue): Successfully connected to Wi‑Fi.
• Quickly flashing Yellow (Red): (1) Camera resetting to factory settings or (2) camera upgrading firmware.

If needed, open the app and go to About Me > FAQ for step-by-step troubleshooting solutions.